@@ -56,6 +56,8 @@ pcie_refclk: pcie-clock-generator {
clock-frequency = <100000000>;
clock-output-names = "pcie3_refclk";
enable-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; /* PCIE30X4_CLKREQN_M1_L */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie30x4_clkreqn_m1_l>;
vdd-supply = <&vcca_3v3_s0>;
};
@@ -339,6 +341,12 @@ module_led_pin: module-led-pin {
};
};
+ pcie30x4 {
+ pcie30x4_clkreqn_m1_l: pcie30x4-clkreqn-m1-l {
+ rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
usb3 {
usb3_id: usb3-id {
rockchip,pins =
Having pinctrl entries defined for used gpios is helpful as it makes sure the pin isn't used anywhere else. The somewhat similar rk3588-jaguar board has a pinctrl entry already, so add the same for rk3588-tiger. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)