diff mbox series

[v2,4/9] clk: ast2700: add clock controller

Message ID 20240802090544.2741206-6-kevin_chen@aspeedtech.com (mailing list archive)
State Superseded, archived
Headers show
Series Introduce ASPEED AST27XX BMC SoC | expand

Commit Message

Kevin Chen Aug. 2, 2024, 9:05 a.m. UTC
Add support for ast2700 clock controller.

Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
---
 drivers/clk/Makefile      |    1 +
 drivers/clk/clk-ast2700.c | 1173 +++++++++++++++++++++++++++++++++++++
 2 files changed, 1174 insertions(+)
 create mode 100644 drivers/clk/clk-ast2700.c

Comments

Krzysztof Kozlowski Aug. 2, 2024, 9:16 a.m. UTC | #1
On 02/08/2024 11:05, Kevin Chen wrote:
> Add support for ast2700 clock controller.
> 
> Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
> ---
>  drivers/clk/Makefile      |    1 +
>  drivers/clk/clk-ast2700.c | 1173 +++++++++++++++++++++++++++++++++++++
>  2 files changed, 1174 insertions(+)
>  create mode 100644 drivers/clk/clk-ast2700.c

Missing bindings.

Best regards,
Krzysztof
Dmitry Baryshkov Aug. 2, 2024, 7:33 p.m. UTC | #2
On Fri, 2 Aug 2024 at 12:05, Kevin Chen <kevin_chen@aspeedtech.com> wrote:
>
> Add support for ast2700 clock controller.
>
> Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
> ---
>  drivers/clk/Makefile      |    1 +
>  drivers/clk/clk-ast2700.c | 1173 +++++++++++++++++++++++++++++++++++++
>  2 files changed, 1174 insertions(+)
>  create mode 100644 drivers/clk/clk-ast2700.c
>
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index f793a16cad40..0d5992ea0fa4 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -38,6 +38,7 @@ obj-$(CONFIG_COMMON_CLK_FSL_SAI)      += clk-fsl-sai.o
>  obj-$(CONFIG_COMMON_CLK_GEMINI)                += clk-gemini.o
>  obj-$(CONFIG_COMMON_CLK_ASPEED)                += clk-aspeed.o
>  obj-$(CONFIG_MACH_ASPEED_G6)           += clk-ast2600.o
> +obj-$(CONFIG_MACH_ASPEED_G7)           += clk-ast2700.o
>  obj-$(CONFIG_ARCH_HIGHBANK)            += clk-highbank.o
>  obj-$(CONFIG_CLK_HSDK)                 += clk-hsdk-pll.o
>  obj-$(CONFIG_COMMON_CLK_K210)          += clk-k210.o
> diff --git a/drivers/clk/clk-ast2700.c b/drivers/clk/clk-ast2700.c
> new file mode 100644
> index 000000000000..eec8e0cb83d9
> --- /dev/null
> +++ b/drivers/clk/clk-ast2700.c
> @@ -0,0 +1,1173 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +// Copyright ASPEED Technology
> +
> +#include <linux/clk-provider.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/reset-controller.h>
> +
> +#include <dt-bindings/clock/aspeed,ast2700-clk.h>
> +#include <dt-bindings/reset/aspeed,ast2700-reset.h>
> +
> +#define SCU_CLK_24MHZ 24000000

Are Aspeed's 24 MHz somehow different from 24 MHz on other platforms?
Please use <linux/units.h> and refrain from defining just random
values. If it has some special meaning (like XO clock or some other
fixed funcion), please use logical names.

> +#define SCU_CLK_25MHZ 25000000
> +#define SCU_CLK_192MHZ 192000000
> +/* SOC0 USB2 PHY CLK*/
> +#define SCU_CLK_12MHZ 12000000

So, this can be #define ASPEED_SOC0_USB2_PHY_RATE (12 * HZ_PER_MHZ)

> +/* SOC0 */
> +#define SCU0_HWSTRAP1 0x010
> +#define SCU0_CLK_STOP 0x240
> +#define SCU0_CLK_SEL1 0x280
> +#define SCU0_CLK_SEL2 0x284
> +#define GET_USB_REFCLK_DIV(x) ((GENMASK(23, 20) & (x)) >> 20)
> +#define UART_DIV13_EN BIT(30)
> +#define SCU0_HPLL_PARAM 0x300
> +#define SCU0_DPLL_PARAM 0x308
> +#define SCU0_MPLL_PARAM 0x310
> +#define SCU0_D1CLK_PARAM 0x320
> +#define SCU0_D2CLK_PARAM 0x330
> +#define SCU0_CRT1CLK_PARAM 0x340
> +#define SCU0_CRT2CLK_PARAM 0x350
> +#define SCU0_MPHYCLK_PARAM 0x360
> +
> +/* SOC1 */
> +#define SCU1_CLK_STOP 0x240
> +#define SCU1_CLK_STOP2 0x260
> +#define SCU1_CLK_SEL1 0x280
> +#define SCU1_CLK_SEL2 0x284
> +#define UXCLK_MASK GENMASK(1, 0)
> +#define HUXCLK_MASK GENMASK(4, 3)
> +#define SCU1_HPLL_PARAM 0x300
> +#define SCU1_APLL_PARAM 0x310
> +#define SCU1_DPLL_PARAM 0x320
> +#define SCU1_UXCLK_CTRL 0x330
> +#define SCU1_HUXCLK_CTRL 0x334
> +#define SCU1_MAC12_CLK_DLY 0x390
> +#define SCU1_MAC12_CLK_DLY_100M 0x394
> +#define SCU1_MAC12_CLK_DLY_10M 0x398
> +
> +/*
> + * MAC Clock Delay settings
> + */
> +#define MAC_CLK_RMII1_50M_RCLK_O_CTRL          BIT(30)
> +#define   MAC_CLK_RMII1_50M_RCLK_O_DIS         0
> +#define   MAC_CLK_RMII1_50M_RCLK_O_EN          1
> +#define MAC_CLK_RMII0_50M_RCLK_O_CTRL          BIT(29)
> +#define   MAC_CLK_RMII0_5M_RCLK_O_DIS          0
> +#define   MAC_CLK_RMII0_5M_RCLK_O_EN           1
> +#define MAC_CLK_RMII_TXD_FALLING_2             BIT(27)
> +#define MAC_CLK_RMII_TXD_FALLING_1             BIT(26)
> +#define MAC_CLK_RXCLK_INV_2                    BIT(25)
> +#define MAC_CLK_RXCLK_INV_1                    BIT(24)
> +#define MAC_CLK_1G_INPUT_DELAY_2               GENMASK(23, 18)
> +#define MAC_CLK_1G_INPUT_DELAY_1               GENMASK(17, 12)
> +#define MAC_CLK_1G_OUTPUT_DELAY_2              GENMASK(11, 6)
> +#define MAC_CLK_1G_OUTPUT_DELAY_1              GENMASK(5, 0)
> +
> +#define MAC_CLK_100M_10M_RESERVED              GENMASK(31, 26)
> +#define MAC_CLK_100M_10M_RXCLK_INV_2           BIT(25)
> +#define MAC_CLK_100M_10M_RXCLK_INV_1           BIT(24)
> +#define MAC_CLK_100M_10M_INPUT_DELAY_2         GENMASK(23, 18)
> +#define MAC_CLK_100M_10M_INPUT_DELAY_1         GENMASK(17, 12)
> +#define MAC_CLK_100M_10M_OUTPUT_DELAY_2                GENMASK(11, 6)
> +#define MAC_CLK_100M_10M_OUTPUT_DELAY_1                GENMASK(5, 0)
> +
> +#define AST2700_DEF_MAC12_DELAY_1G     0x00CF4D75

lowcase hex, please.

> +#define AST2700_DEF_MAC12_DELAY_100M   0x00410410
> +#define AST2700_DEF_MAC12_DELAY_10M    0x00410410
> +
> +struct mac_delay_config {
> +       u32 tx_delay_1000;
> +       u32 rx_delay_1000;
> +       u32 tx_delay_100;
> +       u32 rx_delay_100;
> +       u32 tx_delay_10;
> +       u32 rx_delay_10;
> +};
> +
> +/* Globally visible clocks */
> +static DEFINE_SPINLOCK(ast2700_clk_lock);
> +
> +/* Division of RGMII Clock */
> +static const struct clk_div_table ast2700_rgmii_div_table[] = {
> +       { 0x0, 4 },
> +       { 0x1, 4 },
> +       { 0x2, 6 },
> +       { 0x3, 8 },
> +       { 0x4, 10 },
> +       { 0x5, 12 },
> +       { 0x6, 14 },
> +       { 0x7, 16 },
> +       { 0 }
> +};
> +
> +/* Division of RMII Clock */
> +static const struct clk_div_table ast2700_rmii_div_table[] = {
> +       { 0x0, 8 },
> +       { 0x1, 8 },
> +       { 0x2, 12 },
> +       { 0x3, 16 },
> +       { 0x4, 20 },
> +       { 0x5, 24 },
> +       { 0x6, 28 },
> +       { 0x7, 32 },
> +       { 0 }
> +};
> +
> +/* Division of HCLK/SDIO/MAC/apll_divn CLK */
> +static const struct clk_div_table ast2700_clk_div_table[] = {
> +       { 0x0, 2 },
> +       { 0x1, 2 },
> +       { 0x2, 3 },
> +       { 0x3, 4 },
> +       { 0x4, 5 },
> +       { 0x5, 6 },
> +       { 0x6, 7 },
> +       { 0x7, 8 },
> +       { 0 }
> +};
> +
> +/* Division of PCLK/EMMC CLK */
> +static const struct clk_div_table ast2700_clk_div_table2[] = {
> +       { 0x0, 2 },
> +       { 0x1, 4 },
> +       { 0x2, 6 },
> +       { 0x3, 8 },
> +       { 0x4, 10 },
> +       { 0x5, 12 },
> +       { 0x6, 14 },
> +       { 0x7, 16 },
> +       { 0 }
> +};
> +
> +/* HPLL/DPLL: 2000Mhz(default) */
> +static struct clk_hw *ast2700_soc0_hw_pll(const char *name, const char *parent_name, u32 val)

Please migrate from using parent_names to either using parent_hw or
using fwname to specify the parent clock.

> +{
> +       unsigned int mult, div;
> +
> +       if (val & BIT(24)) {
> +               /* Pass through mode */
> +               mult = 1;
> +               div = 1;
> +       } else {
> +               /* F = CLKIN(25MHz) * [(M+1) / 2(N+1)] / (P+1) */
> +               u32 m = val & 0x1fff;
> +               u32 n = (val >> 13) & 0x3f;
> +               u32 p = (val >> 19) & 0xf;
> +
> +               mult = (m + 1) / (2 * (n + 1));
> +               div = (p + 1);
> +       }
> +
> +       return clk_hw_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
> +};
> +
> +/* MPLL 1600Mhz(default) */
> +static struct clk_hw *ast2700_calc_mpll(const char *name, const char *parent_name, u32 val)
> +{
> +       unsigned int mult, div;
> +
> +       if (val & BIT(24)) {
> +               /* Pass through mode */
> +               div = 1;
> +               mult = div;
> +       } else {
> +               /* F = CLKIN(25MHz) * [CLKF/(CLKR+1)] /(CLKOD+1) */
> +               u32 m = val & 0x1fff;
> +               u32 n = (val >> 13) & 0x3f;
> +               u32 p = (val >> 19) & 0xf;
> +
> +               mult = m / (n + 1);
> +               div = (p + 1);
> +       }
> +       return clk_hw_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
> +};
> +
> +static struct clk_hw *ast2700_calc_uclk(const char *name, u32 val)
> +{
> +       unsigned int mult, div;
> +
> +       /* UARTCLK = UXCLK * R / (N * 2) */
> +       u32 r = val & 0xff;
> +       u32 n = (val >> 8) & 0x3ff;
> +
> +       mult = r;
> +       div = n * 2;
> +
> +       return clk_hw_register_fixed_factor(NULL, name, "uxclk", 0, mult, div);
> +};
> +
> +static struct clk_hw *ast2700_calc_huclk(const char *name, u32 val)
> +{
> +       unsigned int mult, div;
> +
> +       /* UARTCLK = UXCLK * R / (N * 2) */
> +       u32 r = val & 0xff;
> +       u32 n = (val >> 8) & 0x3ff;
> +
> +       mult = r;
> +       div = n * 2;
> +
> +       return clk_hw_register_fixed_factor(NULL, name, "huxclk", 0, mult, div);
> +};
> +
> +static struct clk_hw *ast2700_calc_soc1_pll(const char *name, const char *parent_name, u32 val)

How is this different from ast2700_soc0_hw_pll() ?

> +{
> +       unsigned int mult, div;
> +
> +       if (val & BIT(24)) {
> +               /* Pass through mode */
> +               div = 1;
> +               mult = div;
> +       } else {
> +               /* F = 25Mhz * [(M + 1) / (n + 1)] / (p + 1) */
> +               u32 m = val & 0x1fff;
> +               u32 n = (val >> 13) & 0x3f;
> +               u32 p = (val >> 19) & 0xf;
> +
> +               mult = (m + 1) / (n + 1);
> +               div = (p + 1);
> +       }
> +       return clk_hw_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
> +};
> +
Kevin Chen Oct. 8, 2024, 3:10 a.m. UTC | #3
> >
> > Add support for ast2700 clock controller.
> >
> > Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
> > ---
> >  drivers/clk/Makefile      |    1 +
> >  drivers/clk/clk-ast2700.c | 1173
> > +++++++++++++++++++++++++++++++++++++
> >  2 files changed, 1174 insertions(+)
> >  create mode 100644 drivers/clk/clk-ast2700.c
> >
> > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index
> > f793a16cad40..0d5992ea0fa4 100644
> > --- a/drivers/clk/Makefile
> > +++ b/drivers/clk/Makefile
> > @@ -38,6 +38,7 @@ obj-$(CONFIG_COMMON_CLK_FSL_SAI)      +=
> clk-fsl-sai.o
> >  obj-$(CONFIG_COMMON_CLK_GEMINI)                += clk-gemini.o
> >  obj-$(CONFIG_COMMON_CLK_ASPEED)                += clk-aspeed.o
> >  obj-$(CONFIG_MACH_ASPEED_G6)           += clk-ast2600.o
> > +obj-$(CONFIG_MACH_ASPEED_G7)           += clk-ast2700.o
> >  obj-$(CONFIG_ARCH_HIGHBANK)            += clk-highbank.o
> >  obj-$(CONFIG_CLK_HSDK)                 += clk-hsdk-pll.o
> >  obj-$(CONFIG_COMMON_CLK_K210)          += clk-k210.o
> > diff --git a/drivers/clk/clk-ast2700.c b/drivers/clk/clk-ast2700.c new
> > file mode 100644 index 000000000000..eec8e0cb83d9
> > --- /dev/null
> > +++ b/drivers/clk/clk-ast2700.c
> > @@ -0,0 +1,1173 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later // Copyright ASPEED
> > +Technology
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_device.h>
> > +#include <linux/reset-controller.h>
> > +
> > +#include <dt-bindings/clock/aspeed,ast2700-clk.h>
> > +#include <dt-bindings/reset/aspeed,ast2700-reset.h>
> > +
> > +#define SCU_CLK_24MHZ 24000000
> 
> Are Aspeed's 24 MHz somehow different from 24 MHz on other platforms?
> Please use <linux/units.h> and refrain from defining just random values. If it
> has some special meaning (like XO clock or some other fixed funcion), please
> use logical names.
Already split clock and reset to Ryan's commit.
https://patchwork.kernel.org/project/linux-clk/list/?series=892020
Please check the series of " Add support for AST2700 clk driver".

> 
> > +#define SCU_CLK_25MHZ 25000000
> > +#define SCU_CLK_192MHZ 192000000
> > +/* SOC0 USB2 PHY CLK*/
> > +#define SCU_CLK_12MHZ 12000000
> 
> So, this can be #define ASPEED_SOC0_USB2_PHY_RATE (12 * HZ_PER_MHZ)
Already split clock and reset to Ryan's commit.
https://patchwork.kernel.org/project/linux-clk/list/?series=892020
Please check the series of " Add support for AST2700 clk driver".

> 
> > +/* SOC0 */
> > +#define SCU0_HWSTRAP1 0x010
> > +#define SCU0_CLK_STOP 0x240
> > +#define SCU0_CLK_SEL1 0x280
> > +#define SCU0_CLK_SEL2 0x284
> > +#define GET_USB_REFCLK_DIV(x) ((GENMASK(23, 20) & (x)) >> 20) #define
> > +UART_DIV13_EN BIT(30) #define SCU0_HPLL_PARAM 0x300 #define
> > +SCU0_DPLL_PARAM 0x308 #define SCU0_MPLL_PARAM 0x310 #define
> > +SCU0_D1CLK_PARAM 0x320 #define SCU0_D2CLK_PARAM 0x330 #define
> > +SCU0_CRT1CLK_PARAM 0x340 #define SCU0_CRT2CLK_PARAM 0x350
> #define
> > +SCU0_MPHYCLK_PARAM 0x360
> > +
> > +/* SOC1 */
> > +#define SCU1_CLK_STOP 0x240
> > +#define SCU1_CLK_STOP2 0x260
> > +#define SCU1_CLK_SEL1 0x280
> > +#define SCU1_CLK_SEL2 0x284
> > +#define UXCLK_MASK GENMASK(1, 0)
> > +#define HUXCLK_MASK GENMASK(4, 3)
> > +#define SCU1_HPLL_PARAM 0x300
> > +#define SCU1_APLL_PARAM 0x310
> > +#define SCU1_DPLL_PARAM 0x320
> > +#define SCU1_UXCLK_CTRL 0x330
> > +#define SCU1_HUXCLK_CTRL 0x334
> > +#define SCU1_MAC12_CLK_DLY 0x390
> > +#define SCU1_MAC12_CLK_DLY_100M 0x394 #define
> SCU1_MAC12_CLK_DLY_10M
> > +0x398
> > +
> > +/*
> > + * MAC Clock Delay settings
> > + */
> > +#define MAC_CLK_RMII1_50M_RCLK_O_CTRL          BIT(30)
> > +#define   MAC_CLK_RMII1_50M_RCLK_O_DIS         0
> > +#define   MAC_CLK_RMII1_50M_RCLK_O_EN          1
> > +#define MAC_CLK_RMII0_50M_RCLK_O_CTRL          BIT(29)
> > +#define   MAC_CLK_RMII0_5M_RCLK_O_DIS          0
> > +#define   MAC_CLK_RMII0_5M_RCLK_O_EN           1
> > +#define MAC_CLK_RMII_TXD_FALLING_2             BIT(27)
> > +#define MAC_CLK_RMII_TXD_FALLING_1             BIT(26)
> > +#define MAC_CLK_RXCLK_INV_2                    BIT(25)
> > +#define MAC_CLK_RXCLK_INV_1                    BIT(24)
> > +#define MAC_CLK_1G_INPUT_DELAY_2               GENMASK(23, 18)
> > +#define MAC_CLK_1G_INPUT_DELAY_1               GENMASK(17, 12)
> > +#define MAC_CLK_1G_OUTPUT_DELAY_2              GENMASK(11, 6)
> > +#define MAC_CLK_1G_OUTPUT_DELAY_1              GENMASK(5, 0)
> > +
> > +#define MAC_CLK_100M_10M_RESERVED              GENMASK(31,
> 26)
> > +#define MAC_CLK_100M_10M_RXCLK_INV_2           BIT(25)
> > +#define MAC_CLK_100M_10M_RXCLK_INV_1           BIT(24)
> > +#define MAC_CLK_100M_10M_INPUT_DELAY_2         GENMASK(23,
> 18)
> > +#define MAC_CLK_100M_10M_INPUT_DELAY_1         GENMASK(17,
> 12)
> > +#define MAC_CLK_100M_10M_OUTPUT_DELAY_2
> GENMASK(11, 6)
> > +#define MAC_CLK_100M_10M_OUTPUT_DELAY_1
> GENMASK(5, 0)
> > +
> > +#define AST2700_DEF_MAC12_DELAY_1G     0x00CF4D75
> 
> lowcase hex, please.
Already split clock and reset to Ryan's commit.
https://patchwork.kernel.org/project/linux-clk/list/?series=892020
Please check the series of " Add support for AST2700 clk driver".

> 
> > +#define AST2700_DEF_MAC12_DELAY_100M   0x00410410
> > +#define AST2700_DEF_MAC12_DELAY_10M    0x00410410
> > +
> > +struct mac_delay_config {
> > +       u32 tx_delay_1000;
> > +       u32 rx_delay_1000;
> > +       u32 tx_delay_100;
> > +       u32 rx_delay_100;
> > +       u32 tx_delay_10;
> > +       u32 rx_delay_10;
> > +};
> > +
> > +/* Globally visible clocks */
> > +static DEFINE_SPINLOCK(ast2700_clk_lock);
> > +
> > +/* Division of RGMII Clock */
> > +static const struct clk_div_table ast2700_rgmii_div_table[] = {
> > +       { 0x0, 4 },
> > +       { 0x1, 4 },
> > +       { 0x2, 6 },
> > +       { 0x3, 8 },
> > +       { 0x4, 10 },
> > +       { 0x5, 12 },
> > +       { 0x6, 14 },
> > +       { 0x7, 16 },
> > +       { 0 }
> > +};
> > +
> > +/* Division of RMII Clock */
> > +static const struct clk_div_table ast2700_rmii_div_table[] = {
> > +       { 0x0, 8 },
> > +       { 0x1, 8 },
> > +       { 0x2, 12 },
> > +       { 0x3, 16 },
> > +       { 0x4, 20 },
> > +       { 0x5, 24 },
> > +       { 0x6, 28 },
> > +       { 0x7, 32 },
> > +       { 0 }
> > +};
> > +
> > +/* Division of HCLK/SDIO/MAC/apll_divn CLK */ static const struct
> > +clk_div_table ast2700_clk_div_table[] = {
> > +       { 0x0, 2 },
> > +       { 0x1, 2 },
> > +       { 0x2, 3 },
> > +       { 0x3, 4 },
> > +       { 0x4, 5 },
> > +       { 0x5, 6 },
> > +       { 0x6, 7 },
> > +       { 0x7, 8 },
> > +       { 0 }
> > +};
> > +
> > +/* Division of PCLK/EMMC CLK */
> > +static const struct clk_div_table ast2700_clk_div_table2[] = {
> > +       { 0x0, 2 },
> > +       { 0x1, 4 },
> > +       { 0x2, 6 },
> > +       { 0x3, 8 },
> > +       { 0x4, 10 },
> > +       { 0x5, 12 },
> > +       { 0x6, 14 },
> > +       { 0x7, 16 },
> > +       { 0 }
> > +};
> > +
> > +/* HPLL/DPLL: 2000Mhz(default) */
> > +static struct clk_hw *ast2700_soc0_hw_pll(const char *name, const
> > +char *parent_name, u32 val)
> 
> Please migrate from using parent_names to either using parent_hw or using
> fwname to specify the parent clock.
Already split clock and reset to Ryan's commit.
https://patchwork.kernel.org/project/linux-clk/list/?series=892020
Please check the series of " Add support for AST2700 clk driver".

> 
> > +{
> > +       unsigned int mult, div;
> > +
> > +       if (val & BIT(24)) {
> > +               /* Pass through mode */
> > +               mult = 1;
> > +               div = 1;
> > +       } else {
> > +               /* F = CLKIN(25MHz) * [(M+1) / 2(N+1)] / (P+1) */
> > +               u32 m = val & 0x1fff;
> > +               u32 n = (val >> 13) & 0x3f;
> > +               u32 p = (val >> 19) & 0xf;
> > +
> > +               mult = (m + 1) / (2 * (n + 1));
> > +               div = (p + 1);
> > +       }
> > +
> > +       return clk_hw_register_fixed_factor(NULL, name, parent_name,
> > +0, mult, div); };
> > +
> > +/* MPLL 1600Mhz(default) */
> > +static struct clk_hw *ast2700_calc_mpll(const char *name, const char
> > +*parent_name, u32 val) {
> > +       unsigned int mult, div;
> > +
> > +       if (val & BIT(24)) {
> > +               /* Pass through mode */
> > +               div = 1;
> > +               mult = div;
> > +       } else {
> > +               /* F = CLKIN(25MHz) * [CLKF/(CLKR+1)] /(CLKOD+1) */
> > +               u32 m = val & 0x1fff;
> > +               u32 n = (val >> 13) & 0x3f;
> > +               u32 p = (val >> 19) & 0xf;
> > +
> > +               mult = m / (n + 1);
> > +               div = (p + 1);
> > +       }
> > +       return clk_hw_register_fixed_factor(NULL, name, parent_name,
> > +0, mult, div); };
> > +
> > +static struct clk_hw *ast2700_calc_uclk(const char *name, u32 val) {
> > +       unsigned int mult, div;
> > +
> > +       /* UARTCLK = UXCLK * R / (N * 2) */
> > +       u32 r = val & 0xff;
> > +       u32 n = (val >> 8) & 0x3ff;
> > +
> > +       mult = r;
> > +       div = n * 2;
> > +
> > +       return clk_hw_register_fixed_factor(NULL, name, "uxclk", 0,
> > +mult, div); };
> > +
> > +static struct clk_hw *ast2700_calc_huclk(const char *name, u32 val) {
> > +       unsigned int mult, div;
> > +
> > +       /* UARTCLK = UXCLK * R / (N * 2) */
> > +       u32 r = val & 0xff;
> > +       u32 n = (val >> 8) & 0x3ff;
> > +
> > +       mult = r;
> > +       div = n * 2;
> > +
> > +       return clk_hw_register_fixed_factor(NULL, name, "huxclk", 0,
> > +mult, div); };
> > +
> > +static struct clk_hw *ast2700_calc_soc1_pll(const char *name, const
> > +char *parent_name, u32 val)
> 
> How is this different from ast2700_soc0_hw_pll() ?
Already split clock and reset to Ryan's commit.
https://patchwork.kernel.org/project/linux-clk/list/?series=892020
Please check the series of " Add support for AST2700 clk driver".

> 
> > +{
> > +       unsigned int mult, div;
> > +
> > +       if (val & BIT(24)) {
> > +               /* Pass through mode */
> > +               div = 1;
> > +               mult = div;
> > +       } else {
> > +               /* F = 25Mhz * [(M + 1) / (n + 1)] / (p + 1) */
> > +               u32 m = val & 0x1fff;
> > +               u32 n = (val >> 13) & 0x3f;
> > +               u32 p = (val >> 19) & 0xf;
> > +
> > +               mult = (m + 1) / (n + 1);
> > +               div = (p + 1);
> > +       }
> > +       return clk_hw_register_fixed_factor(NULL, name, parent_name,
> > +0, mult, div); };
> > +
> 
> 
> --
> With best wishes
> Dmitry
Ryan Chen Oct. 8, 2024, 3:41 a.m. UTC | #4
Hello Dmitry,
	Thanks, your review.
	I will update in my next clk patch.
	And include you in review email.

> Subject: RE: [PATCH v2 4/9] clk: ast2700: add clock controller
> 
> > >
> > > Add support for ast2700 clock controller.
> > >
> > > Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
> > > ---
> > >  drivers/clk/Makefile      |    1 +
> > >  drivers/clk/clk-ast2700.c | 1173
> > > +++++++++++++++++++++++++++++++++++++
> > >  2 files changed, 1174 insertions(+)  create mode 100644
> > > drivers/clk/clk-ast2700.c
> > >
> > > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index
> > > f793a16cad40..0d5992ea0fa4 100644
> > > --- a/drivers/clk/Makefile
> > > +++ b/drivers/clk/Makefile
> > > @@ -38,6 +38,7 @@ obj-$(CONFIG_COMMON_CLK_FSL_SAI)      +=
> > clk-fsl-sai.o
> > >  obj-$(CONFIG_COMMON_CLK_GEMINI)                +=
> clk-gemini.o
> > >  obj-$(CONFIG_COMMON_CLK_ASPEED)                +=
> clk-aspeed.o
> > >  obj-$(CONFIG_MACH_ASPEED_G6)           += clk-ast2600.o
> > > +obj-$(CONFIG_MACH_ASPEED_G7)           += clk-ast2700.o
> > >  obj-$(CONFIG_ARCH_HIGHBANK)            += clk-highbank.o
> > >  obj-$(CONFIG_CLK_HSDK)                 += clk-hsdk-pll.o
> > >  obj-$(CONFIG_COMMON_CLK_K210)          += clk-k210.o
> > > diff --git a/drivers/clk/clk-ast2700.c b/drivers/clk/clk-ast2700.c
> > > new file mode 100644 index 000000000000..eec8e0cb83d9
> > > --- /dev/null
> > > +++ b/drivers/clk/clk-ast2700.c
> > > @@ -0,0 +1,1173 @@
> > > +// SPDX-License-Identifier: GPL-2.0-or-later // Copyright ASPEED
> > > +Technology
> > > +
> > > +#include <linux/clk-provider.h>
> > > +#include <linux/of_address.h>
> > > +#include <linux/of_device.h>
> > > +#include <linux/reset-controller.h>
> > > +
> > > +#include <dt-bindings/clock/aspeed,ast2700-clk.h>
> > > +#include <dt-bindings/reset/aspeed,ast2700-reset.h>
> > > +
> > > +#define SCU_CLK_24MHZ 24000000
> >
> > Are Aspeed's 24 MHz somehow different from 24 MHz on other platforms?
> > Please use <linux/units.h> and refrain from defining just random
> > values. If it has some special meaning (like XO clock or some other
> > fixed funcion), please use logical names.
> Already split clock and reset to Ryan's commit.
> https://patchwork.kernel.org/project/linux-clk/list/?series=892020
> Please check the series of " Add support for AST2700 clk driver".
> 
> >
> > > +#define SCU_CLK_25MHZ 25000000
> > > +#define SCU_CLK_192MHZ 192000000
> > > +/* SOC0 USB2 PHY CLK*/
> > > +#define SCU_CLK_12MHZ 12000000
> >
> > So, this can be #define ASPEED_SOC0_USB2_PHY_RATE (12 * HZ_PER_MHZ)
> Already split clock and reset to Ryan's commit.
> https://patchwork.kernel.org/project/linux-clk/list/?series=892020
> Please check the series of " Add support for AST2700 clk driver".
> 
> >
> > > +/* SOC0 */
> > > +#define SCU0_HWSTRAP1 0x010
> > > +#define SCU0_CLK_STOP 0x240
> > > +#define SCU0_CLK_SEL1 0x280
> > > +#define SCU0_CLK_SEL2 0x284
> > > +#define GET_USB_REFCLK_DIV(x) ((GENMASK(23, 20) & (x)) >> 20)
> > > +#define UART_DIV13_EN BIT(30) #define SCU0_HPLL_PARAM 0x300
> #define
> > > +SCU0_DPLL_PARAM 0x308 #define SCU0_MPLL_PARAM 0x310 #define
> > > +SCU0_D1CLK_PARAM 0x320 #define SCU0_D2CLK_PARAM 0x330 #define
> > > +SCU0_CRT1CLK_PARAM 0x340 #define SCU0_CRT2CLK_PARAM 0x350
> > #define
> > > +SCU0_MPHYCLK_PARAM 0x360
> > > +
> > > +/* SOC1 */
> > > +#define SCU1_CLK_STOP 0x240
> > > +#define SCU1_CLK_STOP2 0x260
> > > +#define SCU1_CLK_SEL1 0x280
> > > +#define SCU1_CLK_SEL2 0x284
> > > +#define UXCLK_MASK GENMASK(1, 0)
> > > +#define HUXCLK_MASK GENMASK(4, 3)
> > > +#define SCU1_HPLL_PARAM 0x300
> > > +#define SCU1_APLL_PARAM 0x310
> > > +#define SCU1_DPLL_PARAM 0x320
> > > +#define SCU1_UXCLK_CTRL 0x330
> > > +#define SCU1_HUXCLK_CTRL 0x334
> > > +#define SCU1_MAC12_CLK_DLY 0x390
> > > +#define SCU1_MAC12_CLK_DLY_100M 0x394 #define
> > SCU1_MAC12_CLK_DLY_10M
> > > +0x398
> > > +
> > > +/*
> > > + * MAC Clock Delay settings
> > > + */
> > > +#define MAC_CLK_RMII1_50M_RCLK_O_CTRL          BIT(30)
> > > +#define   MAC_CLK_RMII1_50M_RCLK_O_DIS         0
> > > +#define   MAC_CLK_RMII1_50M_RCLK_O_EN          1
> > > +#define MAC_CLK_RMII0_50M_RCLK_O_CTRL          BIT(29)
> > > +#define   MAC_CLK_RMII0_5M_RCLK_O_DIS          0
> > > +#define   MAC_CLK_RMII0_5M_RCLK_O_EN           1
> > > +#define MAC_CLK_RMII_TXD_FALLING_2             BIT(27)
> > > +#define MAC_CLK_RMII_TXD_FALLING_1             BIT(26)
> > > +#define MAC_CLK_RXCLK_INV_2                    BIT(25)
> > > +#define MAC_CLK_RXCLK_INV_1                    BIT(24)
> > > +#define MAC_CLK_1G_INPUT_DELAY_2               GENMASK(23,
> 18)
> > > +#define MAC_CLK_1G_INPUT_DELAY_1               GENMASK(17,
> 12)
> > > +#define MAC_CLK_1G_OUTPUT_DELAY_2              GENMASK(11,
> 6)
> > > +#define MAC_CLK_1G_OUTPUT_DELAY_1              GENMASK(5,
> 0)
> > > +
> > > +#define MAC_CLK_100M_10M_RESERVED
> GENMASK(31,
> > 26)
> > > +#define MAC_CLK_100M_10M_RXCLK_INV_2           BIT(25)
> > > +#define MAC_CLK_100M_10M_RXCLK_INV_1           BIT(24)
> > > +#define MAC_CLK_100M_10M_INPUT_DELAY_2
> GENMASK(23,
> > 18)
> > > +#define MAC_CLK_100M_10M_INPUT_DELAY_1
> GENMASK(17,
> > 12)
> > > +#define MAC_CLK_100M_10M_OUTPUT_DELAY_2
> > GENMASK(11, 6)
> > > +#define MAC_CLK_100M_10M_OUTPUT_DELAY_1
> > GENMASK(5, 0)
> > > +
> > > +#define AST2700_DEF_MAC12_DELAY_1G     0x00CF4D75
> >
> > lowcase hex, please.
> Already split clock and reset to Ryan's commit.
> https://patchwork.kernel.org/project/linux-clk/list/?series=892020
> Please check the series of " Add support for AST2700 clk driver".
> 
> >
> > > +#define AST2700_DEF_MAC12_DELAY_100M   0x00410410
> > > +#define AST2700_DEF_MAC12_DELAY_10M    0x00410410
> > > +
> > > +struct mac_delay_config {
> > > +       u32 tx_delay_1000;
> > > +       u32 rx_delay_1000;
> > > +       u32 tx_delay_100;
> > > +       u32 rx_delay_100;
> > > +       u32 tx_delay_10;
> > > +       u32 rx_delay_10;
> > > +};
> > > +
> > > +/* Globally visible clocks */
> > > +static DEFINE_SPINLOCK(ast2700_clk_lock);
> > > +
> > > +/* Division of RGMII Clock */
> > > +static const struct clk_div_table ast2700_rgmii_div_table[] = {
> > > +       { 0x0, 4 },
> > > +       { 0x1, 4 },
> > > +       { 0x2, 6 },
> > > +       { 0x3, 8 },
> > > +       { 0x4, 10 },
> > > +       { 0x5, 12 },
> > > +       { 0x6, 14 },
> > > +       { 0x7, 16 },
> > > +       { 0 }
> > > +};
> > > +
> > > +/* Division of RMII Clock */
> > > +static const struct clk_div_table ast2700_rmii_div_table[] = {
> > > +       { 0x0, 8 },
> > > +       { 0x1, 8 },
> > > +       { 0x2, 12 },
> > > +       { 0x3, 16 },
> > > +       { 0x4, 20 },
> > > +       { 0x5, 24 },
> > > +       { 0x6, 28 },
> > > +       { 0x7, 32 },
> > > +       { 0 }
> > > +};
> > > +
> > > +/* Division of HCLK/SDIO/MAC/apll_divn CLK */ static const struct
> > > +clk_div_table ast2700_clk_div_table[] = {
> > > +       { 0x0, 2 },
> > > +       { 0x1, 2 },
> > > +       { 0x2, 3 },
> > > +       { 0x3, 4 },
> > > +       { 0x4, 5 },
> > > +       { 0x5, 6 },
> > > +       { 0x6, 7 },
> > > +       { 0x7, 8 },
> > > +       { 0 }
> > > +};
> > > +
> > > +/* Division of PCLK/EMMC CLK */
> > > +static const struct clk_div_table ast2700_clk_div_table2[] = {
> > > +       { 0x0, 2 },
> > > +       { 0x1, 4 },
> > > +       { 0x2, 6 },
> > > +       { 0x3, 8 },
> > > +       { 0x4, 10 },
> > > +       { 0x5, 12 },
> > > +       { 0x6, 14 },
> > > +       { 0x7, 16 },
> > > +       { 0 }
> > > +};
> > > +
> > > +/* HPLL/DPLL: 2000Mhz(default) */
> > > +static struct clk_hw *ast2700_soc0_hw_pll(const char *name, const
> > > +char *parent_name, u32 val)
> >
> > Please migrate from using parent_names to either using parent_hw or
> > using fwname to specify the parent clock.
> Already split clock and reset to Ryan's commit.
> https://patchwork.kernel.org/project/linux-clk/list/?series=892020
> Please check the series of " Add support for AST2700 clk driver".
> 
> >
> > > +{
> > > +       unsigned int mult, div;
> > > +
> > > +       if (val & BIT(24)) {
> > > +               /* Pass through mode */
> > > +               mult = 1;
> > > +               div = 1;
> > > +       } else {
> > > +               /* F = CLKIN(25MHz) * [(M+1) / 2(N+1)] / (P+1) */
> > > +               u32 m = val & 0x1fff;
> > > +               u32 n = (val >> 13) & 0x3f;
> > > +               u32 p = (val >> 19) & 0xf;
> > > +
> > > +               mult = (m + 1) / (2 * (n + 1));
> > > +               div = (p + 1);
> > > +       }
> > > +
> > > +       return clk_hw_register_fixed_factor(NULL, name, parent_name,
> > > +0, mult, div); };
> > > +
> > > +/* MPLL 1600Mhz(default) */
> > > +static struct clk_hw *ast2700_calc_mpll(const char *name, const
> > > +char *parent_name, u32 val) {
> > > +       unsigned int mult, div;
> > > +
> > > +       if (val & BIT(24)) {
> > > +               /* Pass through mode */
> > > +               div = 1;
> > > +               mult = div;
> > > +       } else {
> > > +               /* F = CLKIN(25MHz) * [CLKF/(CLKR+1)] /(CLKOD+1) */
> > > +               u32 m = val & 0x1fff;
> > > +               u32 n = (val >> 13) & 0x3f;
> > > +               u32 p = (val >> 19) & 0xf;
> > > +
> > > +               mult = m / (n + 1);
> > > +               div = (p + 1);
> > > +       }
> > > +       return clk_hw_register_fixed_factor(NULL, name, parent_name,
> > > +0, mult, div); };
> > > +
> > > +static struct clk_hw *ast2700_calc_uclk(const char *name, u32 val) {
> > > +       unsigned int mult, div;
> > > +
> > > +       /* UARTCLK = UXCLK * R / (N * 2) */
> > > +       u32 r = val & 0xff;
> > > +       u32 n = (val >> 8) & 0x3ff;
> > > +
> > > +       mult = r;
> > > +       div = n * 2;
> > > +
> > > +       return clk_hw_register_fixed_factor(NULL, name, "uxclk", 0,
> > > +mult, div); };
> > > +
> > > +static struct clk_hw *ast2700_calc_huclk(const char *name, u32 val) {
> > > +       unsigned int mult, div;
> > > +
> > > +       /* UARTCLK = UXCLK * R / (N * 2) */
> > > +       u32 r = val & 0xff;
> > > +       u32 n = (val >> 8) & 0x3ff;
> > > +
> > > +       mult = r;
> > > +       div = n * 2;
> > > +
> > > +       return clk_hw_register_fixed_factor(NULL, name, "huxclk", 0,
> > > +mult, div); };
> > > +
> > > +static struct clk_hw *ast2700_calc_soc1_pll(const char *name, const
> > > +char *parent_name, u32 val)
> >
> > How is this different from ast2700_soc0_hw_pll() ?
> Already split clock and reset to Ryan's commit.
> https://patchwork.kernel.org/project/linux-clk/list/?series=892020
> Please check the series of " Add support for AST2700 clk driver".
> 
> >
> > > +{
> > > +       unsigned int mult, div;
> > > +
> > > +       if (val & BIT(24)) {
> > > +               /* Pass through mode */
> > > +               div = 1;
> > > +               mult = div;
> > > +       } else {
> > > +               /* F = 25Mhz * [(M + 1) / (n + 1)] / (p + 1) */
> > > +               u32 m = val & 0x1fff;
> > > +               u32 n = (val >> 13) & 0x3f;
> > > +               u32 p = (val >> 19) & 0xf;
> > > +
> > > +               mult = (m + 1) / (n + 1);
> > > +               div = (p + 1);
> > > +       }
> > > +       return clk_hw_register_fixed_factor(NULL, name, parent_name,
> > > +0, mult, div); };
> > > +
> >
> >
> > --
> > With best wishes
> > Dmitry
diff mbox series

Patch

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index f793a16cad40..0d5992ea0fa4 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -38,6 +38,7 @@  obj-$(CONFIG_COMMON_CLK_FSL_SAI)	+= clk-fsl-sai.o
 obj-$(CONFIG_COMMON_CLK_GEMINI)		+= clk-gemini.o
 obj-$(CONFIG_COMMON_CLK_ASPEED)		+= clk-aspeed.o
 obj-$(CONFIG_MACH_ASPEED_G6)		+= clk-ast2600.o
+obj-$(CONFIG_MACH_ASPEED_G7)		+= clk-ast2700.o
 obj-$(CONFIG_ARCH_HIGHBANK)		+= clk-highbank.o
 obj-$(CONFIG_CLK_HSDK)			+= clk-hsdk-pll.o
 obj-$(CONFIG_COMMON_CLK_K210)		+= clk-k210.o
diff --git a/drivers/clk/clk-ast2700.c b/drivers/clk/clk-ast2700.c
new file mode 100644
index 000000000000..eec8e0cb83d9
--- /dev/null
+++ b/drivers/clk/clk-ast2700.c
@@ -0,0 +1,1173 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright ASPEED Technology
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/reset-controller.h>
+
+#include <dt-bindings/clock/aspeed,ast2700-clk.h>
+#include <dt-bindings/reset/aspeed,ast2700-reset.h>
+
+#define SCU_CLK_24MHZ 24000000
+#define SCU_CLK_25MHZ 25000000
+#define SCU_CLK_192MHZ 192000000
+/* SOC0 USB2 PHY CLK*/
+#define SCU_CLK_12MHZ 12000000
+/* SOC0 */
+#define SCU0_HWSTRAP1 0x010
+#define SCU0_CLK_STOP 0x240
+#define SCU0_CLK_SEL1 0x280
+#define SCU0_CLK_SEL2 0x284
+#define GET_USB_REFCLK_DIV(x) ((GENMASK(23, 20) & (x)) >> 20)
+#define UART_DIV13_EN BIT(30)
+#define SCU0_HPLL_PARAM 0x300
+#define SCU0_DPLL_PARAM 0x308
+#define SCU0_MPLL_PARAM 0x310
+#define SCU0_D1CLK_PARAM 0x320
+#define SCU0_D2CLK_PARAM 0x330
+#define SCU0_CRT1CLK_PARAM 0x340
+#define SCU0_CRT2CLK_PARAM 0x350
+#define SCU0_MPHYCLK_PARAM 0x360
+
+/* SOC1 */
+#define SCU1_CLK_STOP 0x240
+#define SCU1_CLK_STOP2 0x260
+#define SCU1_CLK_SEL1 0x280
+#define SCU1_CLK_SEL2 0x284
+#define UXCLK_MASK GENMASK(1, 0)
+#define HUXCLK_MASK GENMASK(4, 3)
+#define SCU1_HPLL_PARAM 0x300
+#define SCU1_APLL_PARAM 0x310
+#define SCU1_DPLL_PARAM 0x320
+#define SCU1_UXCLK_CTRL 0x330
+#define SCU1_HUXCLK_CTRL 0x334
+#define SCU1_MAC12_CLK_DLY 0x390
+#define SCU1_MAC12_CLK_DLY_100M 0x394
+#define SCU1_MAC12_CLK_DLY_10M 0x398
+
+/*
+ * MAC Clock Delay settings
+ */
+#define MAC_CLK_RMII1_50M_RCLK_O_CTRL		BIT(30)
+#define   MAC_CLK_RMII1_50M_RCLK_O_DIS		0
+#define   MAC_CLK_RMII1_50M_RCLK_O_EN		1
+#define MAC_CLK_RMII0_50M_RCLK_O_CTRL		BIT(29)
+#define   MAC_CLK_RMII0_5M_RCLK_O_DIS		0
+#define   MAC_CLK_RMII0_5M_RCLK_O_EN		1
+#define MAC_CLK_RMII_TXD_FALLING_2		BIT(27)
+#define MAC_CLK_RMII_TXD_FALLING_1		BIT(26)
+#define MAC_CLK_RXCLK_INV_2			BIT(25)
+#define MAC_CLK_RXCLK_INV_1			BIT(24)
+#define MAC_CLK_1G_INPUT_DELAY_2		GENMASK(23, 18)
+#define MAC_CLK_1G_INPUT_DELAY_1		GENMASK(17, 12)
+#define MAC_CLK_1G_OUTPUT_DELAY_2		GENMASK(11, 6)
+#define MAC_CLK_1G_OUTPUT_DELAY_1		GENMASK(5, 0)
+
+#define MAC_CLK_100M_10M_RESERVED		GENMASK(31, 26)
+#define MAC_CLK_100M_10M_RXCLK_INV_2		BIT(25)
+#define MAC_CLK_100M_10M_RXCLK_INV_1		BIT(24)
+#define MAC_CLK_100M_10M_INPUT_DELAY_2		GENMASK(23, 18)
+#define MAC_CLK_100M_10M_INPUT_DELAY_1		GENMASK(17, 12)
+#define MAC_CLK_100M_10M_OUTPUT_DELAY_2		GENMASK(11, 6)
+#define MAC_CLK_100M_10M_OUTPUT_DELAY_1		GENMASK(5, 0)
+
+#define AST2700_DEF_MAC12_DELAY_1G	0x00CF4D75
+#define AST2700_DEF_MAC12_DELAY_100M	0x00410410
+#define AST2700_DEF_MAC12_DELAY_10M	0x00410410
+
+struct mac_delay_config {
+	u32 tx_delay_1000;
+	u32 rx_delay_1000;
+	u32 tx_delay_100;
+	u32 rx_delay_100;
+	u32 tx_delay_10;
+	u32 rx_delay_10;
+};
+
+/* Globally visible clocks */
+static DEFINE_SPINLOCK(ast2700_clk_lock);
+
+/* Division of RGMII Clock */
+static const struct clk_div_table ast2700_rgmii_div_table[] = {
+	{ 0x0, 4 },
+	{ 0x1, 4 },
+	{ 0x2, 6 },
+	{ 0x3, 8 },
+	{ 0x4, 10 },
+	{ 0x5, 12 },
+	{ 0x6, 14 },
+	{ 0x7, 16 },
+	{ 0 }
+};
+
+/* Division of RMII Clock */
+static const struct clk_div_table ast2700_rmii_div_table[] = {
+	{ 0x0, 8 },
+	{ 0x1, 8 },
+	{ 0x2, 12 },
+	{ 0x3, 16 },
+	{ 0x4, 20 },
+	{ 0x5, 24 },
+	{ 0x6, 28 },
+	{ 0x7, 32 },
+	{ 0 }
+};
+
+/* Division of HCLK/SDIO/MAC/apll_divn CLK */
+static const struct clk_div_table ast2700_clk_div_table[] = {
+	{ 0x0, 2 },
+	{ 0x1, 2 },
+	{ 0x2, 3 },
+	{ 0x3, 4 },
+	{ 0x4, 5 },
+	{ 0x5, 6 },
+	{ 0x6, 7 },
+	{ 0x7, 8 },
+	{ 0 }
+};
+
+/* Division of PCLK/EMMC CLK */
+static const struct clk_div_table ast2700_clk_div_table2[] = {
+	{ 0x0, 2 },
+	{ 0x1, 4 },
+	{ 0x2, 6 },
+	{ 0x3, 8 },
+	{ 0x4, 10 },
+	{ 0x5, 12 },
+	{ 0x6, 14 },
+	{ 0x7, 16 },
+	{ 0 }
+};
+
+/* HPLL/DPLL: 2000Mhz(default) */
+static struct clk_hw *ast2700_soc0_hw_pll(const char *name, const char *parent_name, u32 val)
+{
+	unsigned int mult, div;
+
+	if (val & BIT(24)) {
+		/* Pass through mode */
+		mult = 1;
+		div = 1;
+	} else {
+		/* F = CLKIN(25MHz) * [(M+1) / 2(N+1)] / (P+1) */
+		u32 m = val & 0x1fff;
+		u32 n = (val >> 13) & 0x3f;
+		u32 p = (val >> 19) & 0xf;
+
+		mult = (m + 1) / (2 * (n + 1));
+		div = (p + 1);
+	}
+
+	return clk_hw_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
+};
+
+/* MPLL 1600Mhz(default) */
+static struct clk_hw *ast2700_calc_mpll(const char *name, const char *parent_name, u32 val)
+{
+	unsigned int mult, div;
+
+	if (val & BIT(24)) {
+		/* Pass through mode */
+		div = 1;
+		mult = div;
+	} else {
+		/* F = CLKIN(25MHz) * [CLKF/(CLKR+1)] /(CLKOD+1) */
+		u32 m = val & 0x1fff;
+		u32 n = (val >> 13) & 0x3f;
+		u32 p = (val >> 19) & 0xf;
+
+		mult = m / (n + 1);
+		div = (p + 1);
+	}
+	return clk_hw_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
+};
+
+static struct clk_hw *ast2700_calc_uclk(const char *name, u32 val)
+{
+	unsigned int mult, div;
+
+	/* UARTCLK = UXCLK * R / (N * 2) */
+	u32 r = val & 0xff;
+	u32 n = (val >> 8) & 0x3ff;
+
+	mult = r;
+	div = n * 2;
+
+	return clk_hw_register_fixed_factor(NULL, name, "uxclk", 0, mult, div);
+};
+
+static struct clk_hw *ast2700_calc_huclk(const char *name, u32 val)
+{
+	unsigned int mult, div;
+
+	/* UARTCLK = UXCLK * R / (N * 2) */
+	u32 r = val & 0xff;
+	u32 n = (val >> 8) & 0x3ff;
+
+	mult = r;
+	div = n * 2;
+
+	return clk_hw_register_fixed_factor(NULL, name, "huxclk", 0, mult, div);
+};
+
+static struct clk_hw *ast2700_calc_soc1_pll(const char *name, const char *parent_name, u32 val)
+{
+	unsigned int mult, div;
+
+	if (val & BIT(24)) {
+		/* Pass through mode */
+		div = 1;
+		mult = div;
+	} else {
+		/* F = 25Mhz * [(M + 1) / (n + 1)] / (p + 1) */
+		u32 m = val & 0x1fff;
+		u32 n = (val >> 13) & 0x3f;
+		u32 p = (val >> 19) & 0xf;
+
+		mult = (m + 1) / (n + 1);
+		div = (p + 1);
+	}
+	return clk_hw_register_fixed_factor(NULL, name, parent_name, 0, mult, div);
+};
+
+static int ast2700_clk_is_enabled(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	u32 clk = BIT(gate->bit_idx);
+	u32 reg;
+
+	reg = readl(gate->reg);
+
+	return !(reg & clk);
+}
+
+static int ast2700_clk_enable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	u32 clk = BIT(gate->bit_idx);
+
+	if (readl(gate->reg) & clk)
+		writel(clk, gate->reg + 0x04);
+
+	return 0;
+}
+
+static void ast2700_clk_disable(struct clk_hw *hw)
+{
+	struct clk_gate *gate = to_clk_gate(hw);
+	u32 clk = BIT(gate->bit_idx);
+
+	/* Clock is set to enable, so use write to set register */
+	writel(clk, gate->reg);
+}
+
+static const struct clk_ops ast2700_clk_gate_ops = {
+	.enable = ast2700_clk_enable,
+	.disable = ast2700_clk_disable,
+	.is_enabled = ast2700_clk_is_enabled,
+};
+
+static struct clk_hw *ast2700_clk_hw_register_gate(struct device *dev, const char *name,
+						   const char *parent_name, unsigned long flags,
+						   void __iomem *reg, u8 clock_idx,
+						   u8 clk_gate_flags, spinlock_t *lock)
+{
+	struct clk_gate *gate;
+	struct clk_hw *hw;
+	struct clk_init_data init;
+	int ret = -EINVAL;
+
+	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+	if (!gate)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &ast2700_clk_gate_ops;
+	init.flags = flags;
+	init.parent_names = parent_name ? &parent_name : NULL;
+	init.num_parents = parent_name ? 1 : 0;
+
+	gate->reg = reg;
+	gate->bit_idx = clock_idx;
+	gate->flags = clk_gate_flags;
+	gate->lock = lock;
+	gate->hw.init = &init;
+
+	hw = &gate->hw;
+	ret = clk_hw_register(dev, hw);
+	if (ret) {
+		kfree(gate);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
+
+struct ast2700_reset {
+	void __iomem *base;
+	struct reset_controller_dev rcdev;
+};
+
+#define to_rc_data(p) container_of(p, struct ast2700_reset, rcdev)
+
+static int ast2700_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	struct ast2700_reset *rc = to_rc_data(rcdev);
+	u32 rst = BIT(id % 32);
+	u32 reg = id >= 32 ? 0x220 : 0x200;
+
+	if (id == SCU1_RESET_PCIE2RST)
+		writel(readl(rc->base + 0x908) & ~BIT(0), rc->base + 0x908);
+	else
+		writel(rst, rc->base + reg);
+	return 0;
+}
+
+static int ast2700_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	struct ast2700_reset *rc = to_rc_data(rcdev);
+	u32 rst = BIT(id % 32);
+	u32 reg = id >= 32 ? 0x220 : 0x200;
+
+	if (id == SCU1_RESET_PCIE2RST)
+		writel(readl(rc->base + 0x908) | BIT(0), rc->base + 0x908);
+	else
+		/* Use set to clear register */
+		writel(rst, rc->base + reg + 0x04);
+	return 0;
+}
+
+static int ast2700_reset_status(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	struct ast2700_reset *rc = to_rc_data(rcdev);
+	u32 rst = BIT(id % 32);
+	u32 reg = id >= 32 ? 0x220 : 0x200;
+
+	return (readl(rc->base + reg) & rst);
+}
+
+static const struct reset_control_ops ast2700_reset_ops = {
+	.assert = ast2700_reset_assert,
+	.deassert = ast2700_reset_deassert,
+	.status = ast2700_reset_status,
+};
+
+static const char *const sdclk_sel[] = {
+	"soc1-hpll",
+	"soc1-apll",
+};
+
+static const char *const uartclk_sel[] = {
+	"uartxclk",
+	"huartxclk",
+};
+
+static const char *const uxclk_sel[] = {
+	"soc1-apll_div4",
+	"soc1-apll_div2",
+	"soc1-apll",
+	"soc1-hpll",
+};
+
+static void ast2700_soc1_configure_mac01_clk(struct device_node *np)
+{
+	void __iomem *clk_base;
+	struct mac_delay_config mac_cfg;
+	u32 reg[3];
+	int ret;
+
+	clk_base = of_iomap(np, 0);
+	if (IS_ERR(clk_base))
+		return;
+
+	reg[0] = AST2700_DEF_MAC12_DELAY_1G;
+	reg[1] = AST2700_DEF_MAC12_DELAY_100M;
+	reg[2] = AST2700_DEF_MAC12_DELAY_10M;
+
+	ret = of_property_read_u32_array(np, "mac0-clk-delay", (u32 *)&mac_cfg,
+					 sizeof(mac_cfg) / sizeof(u32));
+	if (!ret) {
+		reg[0] &= ~(MAC_CLK_1G_INPUT_DELAY_1 | MAC_CLK_1G_OUTPUT_DELAY_1);
+		reg[0] |= FIELD_PREP(MAC_CLK_1G_INPUT_DELAY_1, mac_cfg.rx_delay_1000) |
+			  FIELD_PREP(MAC_CLK_1G_OUTPUT_DELAY_1, mac_cfg.tx_delay_1000);
+
+		reg[1] &= ~(MAC_CLK_100M_10M_INPUT_DELAY_1 | MAC_CLK_100M_10M_OUTPUT_DELAY_1);
+		reg[1] |= FIELD_PREP(MAC_CLK_100M_10M_INPUT_DELAY_1, mac_cfg.rx_delay_100) |
+			  FIELD_PREP(MAC_CLK_100M_10M_OUTPUT_DELAY_1, mac_cfg.tx_delay_100);
+
+		reg[2] &= ~(MAC_CLK_100M_10M_INPUT_DELAY_1 | MAC_CLK_100M_10M_OUTPUT_DELAY_1);
+		reg[2] |= FIELD_PREP(MAC_CLK_100M_10M_INPUT_DELAY_1, mac_cfg.rx_delay_10) |
+			  FIELD_PREP(MAC_CLK_100M_10M_OUTPUT_DELAY_1, mac_cfg.tx_delay_10);
+	}
+
+	ret = of_property_read_u32_array(np, "mac1-clk-delay", (u32 *)&mac_cfg,
+					 sizeof(mac_cfg) / sizeof(u32));
+	if (!ret) {
+		reg[0] &= ~(MAC_CLK_1G_INPUT_DELAY_2 | MAC_CLK_1G_OUTPUT_DELAY_2);
+		reg[0] |= FIELD_PREP(MAC_CLK_1G_INPUT_DELAY_2, mac_cfg.rx_delay_1000) |
+			  FIELD_PREP(MAC_CLK_1G_OUTPUT_DELAY_2, mac_cfg.tx_delay_1000);
+
+		reg[1] &= ~(MAC_CLK_100M_10M_INPUT_DELAY_2 | MAC_CLK_100M_10M_OUTPUT_DELAY_2);
+		reg[1] |= FIELD_PREP(MAC_CLK_100M_10M_INPUT_DELAY_2, mac_cfg.rx_delay_100) |
+			  FIELD_PREP(MAC_CLK_100M_10M_OUTPUT_DELAY_2, mac_cfg.tx_delay_100);
+
+		reg[2] &= ~(MAC_CLK_100M_10M_INPUT_DELAY_2 | MAC_CLK_100M_10M_OUTPUT_DELAY_2);
+		reg[2] |= FIELD_PREP(MAC_CLK_100M_10M_INPUT_DELAY_2, mac_cfg.rx_delay_10) |
+			  FIELD_PREP(MAC_CLK_100M_10M_OUTPUT_DELAY_2, mac_cfg.tx_delay_10);
+	}
+
+	reg[0] |= (readl(clk_base + SCU1_MAC12_CLK_DLY) & ~GENMASK(25, 0));
+	writel(reg[0], clk_base + SCU1_MAC12_CLK_DLY);
+	writel(reg[1], clk_base + SCU1_MAC12_CLK_DLY_100M);
+	writel(reg[2], clk_base + SCU1_MAC12_CLK_DLY_10M);
+}
+
+static int ast2700_soc1_clk_init(struct device_node *soc1_node)
+{
+	struct clk_hw_onecell_data *clk_data;
+	struct ast2700_reset *reset;
+	u32 uart_clk_source = 0;
+	void __iomem *clk_base;
+	struct clk_hw **clks;
+	u32 val, id;
+	int ret;
+
+	clk_base = of_iomap(soc1_node, 0);
+	if (IS_ERR(clk_base))
+		return PTR_ERR(clk_base);
+
+	clk_data = kzalloc(struct_size(clk_data, hws, SOC1_NUM_CLKS), GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	clk_data->num = SOC1_NUM_CLKS;
+	clks = clk_data->hws;
+
+	reset = kzalloc(sizeof(*reset), GFP_KERNEL);
+	if (!reset)
+		return -ENOMEM;
+
+	reset->base = clk_base;
+
+	reset->rcdev.owner = THIS_MODULE;
+	reset->rcdev.nr_resets = SOC1_RESET_NUMS;
+	reset->rcdev.ops = &ast2700_reset_ops;
+	reset->rcdev.of_node = soc1_node;
+
+	ret = reset_controller_register(&reset->rcdev);
+	if (ret) {
+		pr_err("soc1 failed to register reset controller\n");
+		return ret;
+	}
+	/*
+	 * Ast2700 A0 workaround:
+	 * I3C reset should assert all of the I3C controllers simultaneously.
+	 * Otherwise, it may lead to failure in accessing I3C registers.
+	 */
+	for (id = SCU1_RESET_I3C0; id <= SCU1_RESET_I3C15; id++)
+		ast2700_reset_assert(&reset->rcdev, id);
+
+	clks[SCU1_CLKIN] =
+		clk_hw_register_fixed_rate(NULL, "soc1-clkin", NULL, 0, SCU_CLK_25MHZ);
+
+	/* HPLL 1000Mhz */
+	val = readl(clk_base + SCU1_HPLL_PARAM);
+	clks[SCU1_CLK_HPLL] = ast2700_calc_soc1_pll("soc1-hpll", "soc1-clkin", val);
+
+	/* HPLL 800Mhz */
+	val = readl(clk_base + SCU1_APLL_PARAM);
+	clks[SCU1_CLK_APLL] = ast2700_calc_soc1_pll("soc1-apll", "soc1-clkin", val);
+
+	clks[SCU1_CLK_APLL_DIV2] =
+		clk_hw_register_fixed_factor(NULL, "soc1-apll_div2", "soc1-apll", 0, 1, 2);
+
+	clks[SCU1_CLK_APLL_DIV4] =
+		clk_hw_register_fixed_factor(NULL, "soc1-apll_div4", "soc1-apll", 0, 1, 4);
+
+	val = readl(clk_base + SCU1_DPLL_PARAM);
+	clks[SCU1_CLK_DPLL] = ast2700_calc_soc1_pll("dpll", "soc1-clkin", val);
+
+	/* uxclk mux selection */
+	clks[SCU1_CLK_UXCLK] =
+		clk_hw_register_mux(NULL, "uxclk", uxclk_sel, ARRAY_SIZE(uxclk_sel),
+				    0, clk_base + SCU1_CLK_SEL2,
+				    0, 2, 0, &ast2700_clk_lock);
+
+	val = readl(clk_base + SCU1_UXCLK_CTRL);
+	clks[SCU1_CLK_UARTX] = ast2700_calc_uclk("uartxclk", val);
+
+	/* huxclk mux selection */
+	clks[SCU1_CLK_HUXCLK] =
+		clk_hw_register_mux(NULL, "huxclk", uxclk_sel, ARRAY_SIZE(uxclk_sel),
+				    0, clk_base + SCU1_CLK_SEL2,
+				    3, 2, 0, &ast2700_clk_lock);
+
+	val = readl(clk_base + SCU1_HUXCLK_CTRL);
+	clks[SCU1_CLK_HUARTX] = ast2700_calc_huclk("huartxclk", val);
+
+	/* AHB CLK = 200Mhz */
+	clks[SCU1_CLK_AHB] =
+		clk_hw_register_divider_table(NULL, "soc1-ahb", "soc1-hpll",
+					      0, clk_base + SCU1_CLK_SEL2,
+					      20, 3, 0, ast2700_clk_div_table, &ast2700_clk_lock);
+
+	/* APB CLK = 100Mhz */
+	clks[SCU1_CLK_APB] =
+		clk_hw_register_divider_table(NULL, "soc1-apb", "soc1-hpll",
+					      0, clk_base + SCU1_CLK_SEL1,
+					      18, 3, 0, ast2700_clk_div_table2, &ast2700_clk_lock);
+
+	/* RMII */
+	clks[SCU1_CLK_RMII] =
+		clk_hw_register_divider_table(NULL, "rmii", "soc1-hpll",
+					      0, clk_base + SCU1_CLK_SEL1,
+					      21, 3, 0, ast2700_rmii_div_table, &ast2700_clk_lock);
+
+	/* RMII0 50MHz (RCLK) output enable */
+	clks[SCU1_CLK_MAC0RCLK] =
+		clk_hw_register_gate(NULL, "mac0rclk", "rmii", 0,
+				     clk_base + SCU1_MAC12_CLK_DLY, 29,
+				     0, &ast2700_clk_lock);
+
+	/* RMII1 50MHz (RCLK) output enable */
+	clks[SCU1_CLK_MAC1RCLK] =
+		clk_hw_register_gate(NULL, "mac1rclk", "rmii", 0,
+				     clk_base + SCU1_MAC12_CLK_DLY, 30,
+				     0, &ast2700_clk_lock);
+
+	/* RGMII */
+	clks[SCU1_CLK_RGMII] =
+		clk_hw_register_divider_table(NULL, "rgmii", "soc1-hpll",
+					      0, clk_base + SCU1_CLK_SEL1,
+					      25, 3, 0, ast2700_rgmii_div_table, &ast2700_clk_lock);
+
+	/* MAC HCLK */
+	clks[SCU1_CLK_MACHCLK] =
+		clk_hw_register_divider_table(NULL, "machclk", "soc1-hpll",
+					      0, clk_base + SCU1_CLK_SEL1,
+					      29, 3, 0, ast2700_clk_div_table, &ast2700_clk_lock);
+
+	/* MAC0/1 RGMII/RMII Clock Delay */
+	ast2700_soc1_configure_mac01_clk(soc1_node);
+
+	clks[SCU1_CLK_GATE_LCLK0] =
+		ast2700_clk_hw_register_gate(NULL, "lclk0-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     0, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_LCLK0] =
+		ast2700_clk_hw_register_gate(NULL, "lclk1-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_ESPI0CLK] =
+		ast2700_clk_hw_register_gate(NULL, "espi0clk-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     2, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_ESPI1CLK] =
+		ast2700_clk_hw_register_gate(NULL, "espi1clk-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     3, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_APLL_DIVN] =
+		clk_hw_register_divider_table(NULL, "soc1-apll_divn", "soc1-apll",
+					      0, clk_base + SCU1_CLK_SEL2,
+					      8, 3, 0, ast2700_clk_div_table, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_SDMUX] =
+		clk_hw_register_mux(NULL, "sdclk-mux", sdclk_sel, ARRAY_SIZE(sdclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    13, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_SDCLK] =
+		clk_hw_register_divider_table(NULL, "sdclk", "sdclk-mux",
+					      0, clk_base + SCU1_CLK_SEL1,
+					      14, 3, 0, ast2700_clk_div_table, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_SDCLK] =
+		ast2700_clk_hw_register_gate(NULL, "sdclk-gate", "sdclk",
+					     0, clk_base + SCU1_CLK_STOP,
+					     4, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_IPEREFCLK] =
+		ast2700_clk_hw_register_gate(NULL, "soc1-refclk-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     6, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_LPCHCLK] =
+		ast2700_clk_hw_register_gate(NULL, "lpchclk-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     7, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_MAC0CLK] =
+		ast2700_clk_hw_register_gate(NULL, "mac0clk-gate", NULL,
+					     0, clk_base + SCU1_CLK_STOP,
+					     8, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_MAC1CLK] =
+		ast2700_clk_hw_register_gate(NULL, "mac1clk-gate", NULL,
+					     0, clk_base + SCU1_CLK_STOP,
+					     9, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_MAC2CLK] =
+		ast2700_clk_hw_register_gate(NULL, "mac2clk-gate", NULL,
+					     0, clk_base + SCU1_CLK_STOP,
+					     10, 0, &ast2700_clk_lock);
+
+	of_property_read_u32(soc1_node, "uart-clk-source", &uart_clk_source);
+	if (uart_clk_source) {
+		val = readl(clk_base + SCU1_CLK_SEL1) & ~GENMASK(12, 0);
+		uart_clk_source &= GENMASK(12, 0);
+		writel(val | uart_clk_source, clk_base + SCU1_CLK_SEL1);
+	}
+
+	//UART0
+	clks[SCU1_CLK_UART0] =
+		clk_hw_register_mux(NULL, "uart0clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    0, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART0CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart0clk-gate", "uart0clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     11, 0, &ast2700_clk_lock);
+
+	//UART1
+	clks[SCU1_CLK_UART1] =
+		clk_hw_register_mux(NULL, "uart1clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    1, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART1CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart1clk-gate", "uart1clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     12, 0, &ast2700_clk_lock);
+
+	//UART2
+	clks[SCU1_CLK_UART2] =
+		clk_hw_register_mux(NULL, "uart2clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    2, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART2CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart2clk-gate", "uart2clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     13, 0, &ast2700_clk_lock);
+
+	//UART3
+	clks[SCU1_CLK_UART3] =
+		clk_hw_register_mux(NULL, "uart3clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    3, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART3CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart3clk-gate", "uart3clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP,
+					     14, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C0CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c0clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     16, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C1CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c1clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     17, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C2CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c2clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     18, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C3CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c3clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     19, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C4CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c4clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     20, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C5CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c5clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     21, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C6CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c6clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     22, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C7CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c7clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     23, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C8CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c8clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     24, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C9CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c9clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     25, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C10CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c10clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     26, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C11CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c11clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     27, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C12CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c12clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     28, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C13CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c13clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     29, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C14CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c14clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     30, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_I3C15CLK] =
+		ast2700_clk_hw_register_gate(NULL, "i3c15clk-gate", "soc1-ahb",
+					     0, clk_base + SCU1_CLK_STOP,
+					     31, 0, &ast2700_clk_lock);
+
+	/*clk stop 2 */
+	//UART5
+	clks[SCU1_CLK_UART5] =
+		clk_hw_register_mux(NULL, "uart5clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    5, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART5CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart5clk-gate", "uart5clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP2,
+					     0, 0, &ast2700_clk_lock);
+
+	//UART6
+	clks[SCU1_CLK_UART6] =
+		clk_hw_register_mux(NULL, "uart6clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    6, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART6CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart6clk-gate", "uart6clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP2,
+					     1, 0, &ast2700_clk_lock);
+
+	//UART7
+	clks[SCU1_CLK_UART7] =
+		clk_hw_register_mux(NULL, "uart7clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    7, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART7CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart7clk-gate", "uart7clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP2,
+					     2, 0, &ast2700_clk_lock);
+
+	//UART8
+	clks[SCU1_CLK_UART8] =
+		clk_hw_register_mux(NULL, "uart8clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    8, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART8CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart8clk-gate", "uart8clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP2,
+					     3, 0, &ast2700_clk_lock);
+
+	//UART9
+	clks[SCU1_CLK_UART9] =
+		clk_hw_register_mux(NULL, "uart9clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    9, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART9CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart9clk-gate", "uart9clk",
+					     0, clk_base + SCU1_CLK_STOP2,
+					     4, 0, &ast2700_clk_lock);
+
+	//UART10
+	clks[SCU1_CLK_UART10] =
+		clk_hw_register_mux(NULL, "uart10clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    10, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART10CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart10clk-gate", "uart10clk",
+					     0, clk_base + SCU1_CLK_STOP2,
+					     5, 0, &ast2700_clk_lock);
+
+	//UART11
+	clks[SCU1_CLK_UART11] =
+		clk_hw_register_mux(NULL, "uart11clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    11, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART11CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart11clk-gate", "uart11clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP2,
+					     6, 0, &ast2700_clk_lock);
+
+	//uart12: call bmc uart
+	clks[SCU1_CLK_UART12] =
+		clk_hw_register_mux(NULL, "uart12clk", uartclk_sel, ARRAY_SIZE(uartclk_sel),
+				    0, clk_base + SCU1_CLK_SEL1,
+				    12, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_UART12CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart12clk-gate", "uart12clk",
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP2,
+					     7, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_FSICLK] =
+		ast2700_clk_hw_register_gate(NULL, "fsiclk-gate", NULL,
+					     0, clk_base + SCU1_CLK_STOP2,
+					     8, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_LTPIPHYCLK] =
+		ast2700_clk_hw_register_gate(NULL, "ltpiphyclk-gate", NULL,
+					     0, clk_base + SCU1_CLK_STOP2,
+					     9, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_LTPICLK] =
+		ast2700_clk_hw_register_gate(NULL, "ltpiclk-gate", NULL,
+					     0, clk_base + SCU1_CLK_STOP2,
+					     10, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_VGALCLK] =
+		ast2700_clk_hw_register_gate(NULL, "vgalclk-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP2,
+					     11, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_USBUARTCLK] =
+		ast2700_clk_hw_register_gate(NULL, "usbuartclk-gate", NULL,
+					     0, clk_base + SCU1_CLK_STOP2,
+					     12, 0, &ast2700_clk_lock);
+
+	clk_hw_register_fixed_factor(NULL, "canclk", "soc1-apll", 0, 1, 10);
+
+	clks[SCU1_CLK_GATE_CANCLK] =
+		ast2700_clk_hw_register_gate(NULL, "canclk-gate", "canclk",
+					     0, clk_base + SCU1_CLK_STOP2,
+					     13, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_PCICLK] =
+		ast2700_clk_hw_register_gate(NULL, "pciclk-gate", NULL,
+					     0, clk_base + SCU1_CLK_STOP2,
+					     14, 0, &ast2700_clk_lock);
+
+	clks[SCU1_CLK_GATE_SLICLK] =
+		ast2700_clk_hw_register_gate(NULL, "sliclk-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU1_CLK_STOP2,
+					     15, 0, &ast2700_clk_lock);
+
+	of_clk_add_hw_provider(soc1_node, of_clk_hw_onecell_get, clk_data);
+
+	return 0;
+};
+
+static const char *const pspclk_sel[] = {
+	"soc0-mpll",
+	"soc0-hpll",
+};
+
+static const char *const soc0_uartclk_sel[] = {
+	"soc0-clk24Mhz",
+	"soc0-clk192Mhz",
+};
+
+static const char *const emmcclk_sel[] = {
+	"soc0-mpll_div4",
+	"soc0-hpll_div4",
+};
+
+static int ast2700_soc0_clk_init(struct device_node *soc0_node)
+{
+	struct clk_hw_onecell_data *clk_data;
+	void __iomem *clk_base;
+	struct ast2700_reset *reset;
+	struct clk_hw **clks;
+	int div;
+	u32 val;
+	int ret;
+
+	clk_data = kzalloc(struct_size(clk_data, hws, SOC0_NUM_CLKS), GFP_KERNEL);
+	if (!clk_data)
+		return -ENOMEM;
+
+	clk_data->num = SOC0_NUM_CLKS;
+	clks = clk_data->hws;
+
+	clk_base = of_iomap(soc0_node, 0);
+	if (IS_ERR(clk_base))
+		return PTR_ERR(clk_base);
+
+	reset = kzalloc(sizeof(*reset), GFP_KERNEL);
+	if (!reset)
+		return -ENOMEM;
+
+	reset->base = clk_base;
+
+	reset->rcdev.owner = THIS_MODULE;
+	reset->rcdev.nr_resets = SOC0_RESET_NUMS;
+	reset->rcdev.ops = &ast2700_reset_ops;
+	reset->rcdev.of_node = soc0_node;
+
+	ret = reset_controller_register(&reset->rcdev);
+	if (ret) {
+		pr_err("soc0 failed to register reset controller\n");
+		return ret;
+	}
+
+	clks[SCU0_CLKIN] =
+		clk_hw_register_fixed_rate(NULL, "soc0-clkin", NULL, 0, SCU_CLK_25MHZ);
+
+	clks[SCU0_CLK_24M] =
+		clk_hw_register_fixed_rate(NULL, "soc0-clk24Mhz", NULL, 0, SCU_CLK_24MHZ);
+
+	clks[SCU0_CLK_192M] =
+		clk_hw_register_fixed_rate(NULL, "soc0-clk192Mhz", NULL, 0, SCU_CLK_192MHZ);
+
+	//hpll
+	val = readl(clk_base + SCU0_HWSTRAP1);
+	if ((val & GENMASK(3, 2)) != 0) {
+		switch ((val & GENMASK(3, 2)) >> 2) {
+		case 1:
+			clks[SCU0_CLK_HPLL] =
+				clk_hw_register_fixed_rate(NULL, "soc0-hpll", NULL, 0, 1900000000);
+			break;
+		case 2:
+			clks[SCU0_CLK_HPLL] =
+				clk_hw_register_fixed_rate(NULL, "soc0-hpll", NULL, 0, 1800000000);
+			break;
+		case 3:
+			clks[SCU0_CLK_HPLL] =
+				clk_hw_register_fixed_rate(NULL, "soc0-hpll", NULL, 0, 1700000000);
+			break;
+		}
+	} else {
+		val = readl(clk_base + SCU0_HPLL_PARAM);
+		clks[SCU0_CLK_HPLL] = ast2700_soc0_hw_pll("soc0-hpll", "soc0-clkin", val);
+	}
+	clks[SCU0_CLK_HPLL_DIV2] = clk_hw_register_fixed_factor(NULL, "soc0-hpll_div2", "soc0-hpll", 0, 1, 2);
+	clks[SCU0_CLK_HPLL_DIV4] = clk_hw_register_fixed_factor(NULL, "soc0-hpll_div4", "soc0-hpll", 0, 1, 4);
+
+	//dpll
+	val = readl(clk_base + SCU0_DPLL_PARAM);
+	clks[SCU0_CLK_DPLL] = ast2700_soc0_hw_pll("dpll", "soc0-clkin", val);
+
+	//mpll
+	val = readl(clk_base + SCU0_MPLL_PARAM);
+	clks[SCU0_CLK_MPLL] = ast2700_calc_mpll("soc0-mpll", "soc0-clkin", val);
+	clks[SCU0_CLK_MPLL_DIV2] = clk_hw_register_fixed_factor(NULL, "soc0-mpll_div2", "soc0-mpll", 0, 1, 2);
+	clks[SCU0_CLK_MPLL_DIV4] = clk_hw_register_fixed_factor(NULL, "soc0-mpll_div4", "soc0-mpll", 0, 1, 4);
+	clks[SCU0_CLK_MPLL_DIV8] = clk_hw_register_fixed_factor(NULL, "soc0-mpll_div8", "soc0-mpll", 0, 1, 8);
+
+	val = readl(clk_base + SCU0_D1CLK_PARAM);
+	clks[SCU0_CLK_VGA0] = ast2700_soc0_hw_pll("d1clk", "soc0-clkin", val);
+
+	val = readl(clk_base + SCU0_D2CLK_PARAM);
+	clks[SCU0_CLK_VGA1] = ast2700_soc0_hw_pll("d2clk", "soc0-clkin", val);
+
+	val = readl(clk_base + SCU0_CRT1CLK_PARAM);
+	clks[SCU0_CLK_CRT0] = ast2700_soc0_hw_pll("crt0clk", "soc0-clkin", val);
+
+	val = readl(clk_base + SCU0_CRT2CLK_PARAM);
+	clks[SCU0_CLK_CRT1] = ast2700_soc0_hw_pll("crt1clk", "soc0-clkin", val);
+
+	val = readl(clk_base + SCU0_MPHYCLK_PARAM);
+	clks[SCU0_CLK_MPHY] = clk_hw_register_fixed_factor(NULL, "mphyclk", "soc0-hpll", 0, 1, val + 1);
+
+	clks[SCU0_CLK_PSP] =
+		clk_hw_register_mux(NULL, "pspclk", pspclk_sel, ARRAY_SIZE(pspclk_sel),
+				    0, clk_base + SCU0_HWSTRAP1,
+				    4, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_AXI0] =
+		clk_hw_register_fixed_factor(NULL, "axi0clk", "pspclk", 0, 1, 2);
+
+	val = readl(clk_base + SCU0_HWSTRAP1);
+	if (val & BIT(7)) {
+		clks[SCU0_CLK_AHB] =
+			clk_hw_register_divider_table(NULL, "soc0-ahb", "soc0-hpll",
+						      0, clk_base + SCU0_HWSTRAP1,
+						      5, 2, 0, ast2700_clk_div_table, &ast2700_clk_lock);
+	} else {
+		clks[SCU0_CLK_AHB] =
+			clk_hw_register_divider_table(NULL, "soc0-ahb", "soc0-mpll",
+						      0, clk_base + SCU0_HWSTRAP1,
+						      5, 2, 0, ast2700_clk_div_table, &ast2700_clk_lock);
+	}
+
+	clks[SCU0_CLK_AXI1] =
+		clk_hw_register_fixed_factor(NULL, "axi1clk", "soc0-ahb", 0, 1, 2);
+
+	clks[SCU0_CLK_APB] =
+		clk_hw_register_divider_table(NULL, "soc0-apb", "axi0clk",
+					      0, clk_base + SCU0_CLK_SEL1,
+					      23, 3, 0, ast2700_clk_div_table2, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_MCLK] =
+		ast2700_clk_hw_register_gate(NULL, "mclk", "soc0-mpll",
+					     CLK_IS_CRITICAL, clk_base + SCU0_CLK_STOP,
+					     0, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_ECLK] =
+		ast2700_clk_hw_register_gate(NULL, "eclk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     1, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_2DCLK] =
+		ast2700_clk_hw_register_gate(NULL, "gclk", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU0_CLK_STOP,
+					     2, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_VCLK] =
+		ast2700_clk_hw_register_gate(NULL, "vclk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     3, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_BCLK] =
+		ast2700_clk_hw_register_gate(NULL, "bclk", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU0_CLK_STOP,
+					     4, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_VGA0CLK] =
+		ast2700_clk_hw_register_gate(NULL, "d1clk-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU0_CLK_STOP,
+					     5, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_REFCLK] =
+		ast2700_clk_hw_register_gate(NULL, "soc0-refclk-gate", "soc0-clkin",
+					     CLK_IS_CRITICAL, clk_base + SCU0_CLK_STOP,
+					     6, 0, &ast2700_clk_lock);
+
+	div = (GET_USB_REFCLK_DIV(readl(clk_base + SCU0_CLK_SEL2)) + 1) * 2;
+	clks[SCU0_CLK_U2PHY_REFCLK] = clk_hw_register_fixed_factor(NULL, "xhci_ref_clk", "soc0-mpll_div8", 0, 1, div);
+
+	clks[SCU0_CLK_U2PHY_CLK12M] =
+		clk_hw_register_fixed_rate(NULL, "xhci_suspend_clk", NULL, 0, SCU_CLK_12MHZ);
+
+	clks[SCU0_CLK_GATE_PORTBUSB2CLK] =
+		ast2700_clk_hw_register_gate(NULL, "portb-usb2clk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     7, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_UHCICLK] =
+		ast2700_clk_hw_register_gate(NULL, "uhciclk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     9, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_VGA1CLK] =
+		ast2700_clk_hw_register_gate(NULL, "d2clk-gate", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU0_CLK_STOP,
+					     10, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_HACCLK] =
+		ast2700_clk_hw_register_gate(NULL, "hac-clk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     13, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_PORTAUSB2CLK] =
+		ast2700_clk_hw_register_gate(NULL, "porta-usb2clk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     14, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_UART] =
+		clk_hw_register_mux(NULL, "soc0-uartclk", soc0_uartclk_sel, ARRAY_SIZE(soc0_uartclk_sel),
+				    0, clk_base + SCU0_CLK_SEL2,
+				    14, 1, 0, &ast2700_clk_lock);
+
+	if (readl(clk_base + SCU0_CLK_SEL2) & UART_DIV13_EN)
+		div = 13;
+	else
+		div = 1;
+
+	clks[SCU0_CLK_UART4] =
+		clk_hw_register_fixed_factor(NULL, "uart4clk", "soc0-uartclk", 0, 1, div);
+
+	clks[SCU0_CLK_GATE_UART4CLK] =
+		ast2700_clk_hw_register_gate(NULL, "uart4clk-gate", "uart4clk",
+					     CLK_IS_CRITICAL, clk_base + SCU0_CLK_STOP,
+					     15, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_DACCLK] =
+		ast2700_clk_hw_register_gate(NULL, "dacclk", NULL,
+					     CLK_IS_CRITICAL, clk_base + SCU0_CLK_STOP,
+					     17, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_CRT0CLK] =
+		ast2700_clk_hw_register_gate(NULL, "crt0clk-gate", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     20, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_CRT1CLK] =
+		ast2700_clk_hw_register_gate(NULL, "crt1clk-gate", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     21, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_ECDSACLK] =
+		ast2700_clk_hw_register_gate(NULL, "eccclk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     23, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_RSACLK] =
+		ast2700_clk_hw_register_gate(NULL, "rsaclk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     24, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_RVAS0CLK] =
+		ast2700_clk_hw_register_gate(NULL, "rvasclk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     25, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_UFSCLK] =
+		ast2700_clk_hw_register_gate(NULL, "ufsclk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     26, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_EMMCMUX] =
+		clk_hw_register_mux(NULL, "emmcsrc-mux", emmcclk_sel, ARRAY_SIZE(emmcclk_sel),
+				    0, clk_base + SCU0_CLK_SEL1,
+				    11, 1, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_EMMC] =
+		clk_hw_register_divider_table(NULL, "emmcclk", "emmcsrc-mux",
+					      0, clk_base + SCU0_CLK_SEL1,
+					      12, 3, 0, ast2700_clk_div_table2,
+					      &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_EMMCCLK] =
+		ast2700_clk_hw_register_gate(NULL, "emmcclk-gate", "emmcclk",
+					     0, clk_base + SCU0_CLK_STOP,
+					     27, 0, &ast2700_clk_lock);
+
+	clks[SCU0_CLK_GATE_RVAS1CLK] =
+		ast2700_clk_hw_register_gate(NULL, "rvas2clk", NULL,
+					     0, clk_base + SCU0_CLK_STOP,
+					     28, 0, &ast2700_clk_lock);
+
+	of_clk_add_hw_provider(soc0_node, of_clk_hw_onecell_get, clk_data);
+
+	return 0;
+};
+
+CLK_OF_DECLARE_DRIVER(ast2700_soc0, "aspeed,ast2700-scu0", ast2700_soc0_clk_init);
+CLK_OF_DECLARE_DRIVER(ast2700_soc1, "aspeed,ast2700-scu1", ast2700_soc1_clk_init);