From patchwork Tue Aug 20 09:41:58 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Xianwei Zhao via B4 Relay X-Patchwork-Id: 13769773 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id A409E18C01D; Tue, 20 Aug 2024 09:41:58 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1724146918; cv=none; b=ahvPgbFJqB2Hv3zHFbAEqkMPGupMafEQ3QquzAyI4Zq7vM4AlVjBmAjfdneDBJ4F8ZoRBCT4G0u6Ab2pn8ALoxygF9Vp6FWZsvZcehxbcx5jgwvcLXH311v/wZ+vMA/HejaJIKTyY9dl5MtnRCQHPMLcFvxPLxwKgBRkppvPNj8= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1724146918; c=relaxed/simple; bh=RksbSyby9c8du/fSNBcJ9+GCQWwXq8GYhk9FtJCx1/s=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=qslOMr6rLn5lsngvj+Cph+f4JEl/syWF5InWURFDe82dW1AHObWg8mkuBD44aHPh9I721Ym3/3zB+oegx2kaUjS/ysuS01wW9OounmnAR1a1GDBfTjnXjvoanrNtLs98+C25Mr90lr1cM5UOUvlpSjBU0K58Uq7+S8TJHgrnp8E= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=GTMUCyyf; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="GTMUCyyf" Received: by smtp.kernel.org (Postfix) with ESMTPS id 54036C4AF16; Tue, 20 Aug 2024 09:41:58 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1724146918; bh=RksbSyby9c8du/fSNBcJ9+GCQWwXq8GYhk9FtJCx1/s=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To:From; b=GTMUCyyfpdCo033gF9waLXFzKsB9oGXE76ycKJ+4m5c2aohFLAGi6wIWULTtskvXV eHg117SZNyxYj34TS7aHOc2dy3q2fAdqU+DJYigpcKDINK7Ftufa7O8REePmaeinHh Ch+7FnrCekO7HYnp2Azrs58nE2gf9/g1yd6bIv2BuOxFUWrozB7axAbSPWM1Lw/e3+ H9eI01EDqK8L6XJJytmwRp9xY1sLncpG5FlBXV7Dq+B8vyZMxyE7dc7eE3+16lGnbQ yMNzi2OdXZ57kbbIqztuivT5A3lJQkvknZu+CWipPd5xbZJiFoDZn7TALLuT3uHgJh YH7mJ/OjdAtow== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id 44FBAC54722; Tue, 20 Aug 2024 09:41:58 +0000 (UTC) From: Xianwei Zhao via B4 Relay Date: Tue, 20 Aug 2024 17:41:58 +0800 Subject: [PATCH v2 3/3] arm64: dts: amlogic: add C3 AW419 board Precedence: bulk X-Mailing-List: linux-clk@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20240820-c3_add_node-v2-3-8fd3f06b7bce@amlogic.com> References: <20240820-c3_add_node-v2-0-8fd3f06b7bce@amlogic.com> In-Reply-To: <20240820-c3_add_node-v2-0-8fd3f06b7bce@amlogic.com> To: Neil Armstrong , Jerome Brunet , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Chuan Liu , Kevin Hilman , Martin Blumenstingl Cc: Krzysztof Kozlowski , linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Xianwei Zhao X-Mailer: b4 0.12.4 X-Developer-Signature: v=1; a=ed25519-sha256; t=1724146916; l=7203; i=xianwei.zhao@amlogic.com; s=20231208; h=from:subject:message-id; bh=hqGlmZITY3vjqYdQYUfjkBeBJsm3J7SMxQSwSsreB9Y=; b=zUEJVfCGsbZZLIFehZRMhZhZ/UkOscntS36SVOxFBb8j8fTq9YGQBqcLH3KzfRibNB/SOart3 SH4cBOQd99PBlkbA9DvRqAf9AcghFRGIh5z71pFngk0X7JbMyS+6EkX X-Developer-Key: i=xianwei.zhao@amlogic.com; a=ed25519; pk=o4fDH8ZXL6xQg5h17eNzRljf6pwZHWWjqcOSsj3dW24= X-Endpoint-Received: by B4 Relay for xianwei.zhao@amlogic.com/20231208 with auth_id=107 X-Original-From: Xianwei Zhao Reply-To: xianwei.zhao@amlogic.com From: Xianwei Zhao Add Amlogic C3 C308L AW419 board. The corresponding binding has been applied, therefore, this series does not need to add a binding corresponding to the AW419 board. Signed-off-by: Xianwei Zhao Reviewed-by: Neil Armstrong --- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/amlogic-c3-c308l-aw419.dts | 262 +++++++++++++++++++++ 2 files changed, 263 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 29417f04f886..2fbda8419c65 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_MESON) += amlogic-a4-a113l2-ba400.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-a5-a113x2-av400.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c302x-aw409.dtb +dtb-$(CONFIG_ARCH_MESON) += amlogic-c3-c308l-aw419.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-an400.dtb dtb-$(CONFIG_ARCH_MESON) += amlogic-t7-a311d2-khadas-vim4.dtb dtb-$(CONFIG_ARCH_MESON) += meson-a1-ad401.dtb diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts new file mode 100644 index 000000000000..4477a2659e27 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts @@ -0,0 +1,262 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2024 Amlogic, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "amlogic-c3.dtsi" + +/ { + model = "Amlogic C308l aw419 Development Board"; + compatible = "amlogic,aw419", "amlogic,c3"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart_b; + spi0 = &spifc; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 9 MiB reserved for ARM Trusted Firmware */ + secmon_reserved: secmon@7f00000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x07f00000 0x0 0x900000>; + no-map; + }; + }; + + main_12v: regulator-main-12v { + compatible = "regulator-fixed"; + regulator-name = "12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_5v: regulator-vcc-5v { + compatible = "regulator-fixed"; + regulator-name = "VCC5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddq: regulator-vddq { + compatible = "regulator-fixed"; + regulator-name = "VDDQ"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddao_3v3: regulator-vddao-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&main_12v>; + regulator-boot-on; + regulator-always-on; + }; + + vddao_1v8: regulator-vddao-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + ddr4_2v5: regulator-ddr4-2v5 { + compatible = "regulator-fixed"; + regulator-name = "DDR4_2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_3v3: regulator-vcc-3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vcc_1v8: regulator-vcc-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VCC1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vdd_1v8: regulator-vdd-1v8 { + compatible = "regulator-fixed"; + regulator-name = "VDD1V8_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + vddio_b: regulator-vddio-3v3-b { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + regulator-boot-on; + regulator-always-on; + }; + + sdcard: regulator-sdcard { + compatible = "regulator-fixed"; + regulator-name = "SDCARD_POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vddao_3v3>; + gpio = <&gpio GPIOA_4 GPIO_ACTIVE_LOW>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&uart_b { + status = "okay"; +}; + +&nand { + status = "okay"; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-on-flash-bbt; + + partition@0 { + label = "boot"; + reg = <0x0 0x00200000>; + }; + partition@200000 { + label = "env"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "system"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "rootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "media"; + reg = <0x04000000 0x8000000>; + }; + }; +}; + +ðmac { + status = "okay"; + phy-handle = <&internal_ephy>; + phy-mode = "rmii"; +}; + +&spifc { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&spifc_pins>; + pinctrl-names = "default"; + + nand@0 { + compatible = "spi-nand"; + reg = <0>; + spi-max-frequency = <83000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0 0x200000>; + }; + + partition@200000 { + label = "env"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "system"; + reg = <0x600000 0xa00000>; + }; + + partition@1000000 { + label = "rootfs"; + reg = <0x1000000 0x3000000>; + }; + + partition@4000000 { + label = "data"; + reg = <0x4000000 0x8000000>; + }; + }; + }; +}; + +&sd { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-1 = <&sdcard_clk_gate_pins>; + pinctrl-names = "default","clk-gate"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <50000000>; + disable-wp; + + cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>; + vmmc-supply = <&sdcard>; + vqmmc-supply = <&sdcard>; +};