| Message ID | 20241205-rcar-gh-dsi-v2-7-42471851df86@ideasonboard.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
| Series | drm: Add DSI/DP support for Renesas r8a779h0 V4M and grey-hawk board | expand |
Hi Tomi, Thank you for the patch. On Thu, Dec 05, 2024 at 03:45:02PM +0200, Tomi Valkeinen wrote: > From: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> > > Add support for r8a779h0. It is very similar to r8a779g0, but has only > one output. > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> > Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > --- > drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c | 18 ++++++++++++++++++ > drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c | 4 +++- > 2 files changed, 21 insertions(+), 1 deletion(-) > > diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c > index fb719d9aff10..7858e10839f2 100644 > --- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c > +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c > @@ -545,6 +545,23 @@ static const struct rcar_du_device_info rcar_du_r8a779g0_info = { > .dsi_clk_mask = BIT(1) | BIT(0), > }; > > +static const struct rcar_du_device_info rcar_du_r8a779h0_info = { > + .gen = 4, > + .features = RCAR_DU_FEATURE_CRTC_IRQ > + | RCAR_DU_FEATURE_VSP1_SOURCE > + | RCAR_DU_FEATURE_NO_BLENDING, > + .channels_mask = BIT(0), > + .routes = { > + /* R8A779H0 has one MIPI DSI output. */ > + [RCAR_DU_OUTPUT_DSI0] = { > + .possible_crtcs = BIT(0), > + .port = 0, > + }, > + }, > + .num_rpf = 5, > + .dsi_clk_mask = BIT(0), > +}; > + > static const struct of_device_id rcar_du_of_table[] = { > { .compatible = "renesas,du-r8a7742", .data = &rcar_du_r8a7790_info }, > { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info }, > @@ -571,6 +588,7 @@ static const struct of_device_id rcar_du_of_table[] = { > { .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a7799x_info }, > { .compatible = "renesas,du-r8a779a0", .data = &rcar_du_r8a779a0_info }, > { .compatible = "renesas,du-r8a779g0", .data = &rcar_du_r8a779g0_info }, > + { .compatible = "renesas,du-r8a779h0", .data = &rcar_du_r8a779h0_info }, > { } > }; > > diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c > index 0fbf6abbde6e..b9ae6cc43702 100644 > --- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c > +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c > @@ -107,10 +107,12 @@ static void rcar_du_group_setup_didsr(struct rcar_du_group *rgrp) > */ > rcrtc = rcdu->crtcs; > num_crtcs = rcdu->num_crtcs; > - } else if (rcdu->info->gen >= 3 && rgrp->num_crtcs > 1) { > + } else if ((rcdu->info->gen == 3 && rgrp->num_crtcs > 1) || > + rcdu->info->gen == 4) { > /* > * On Gen3 dot clocks are setup through per-group registers, > * only available when the group has two channels. > + * On Gen4 the registers are there for single channel too. > */ > rcrtc = &rcdu->crtcs[rgrp->index * 2]; > num_crtcs = rgrp->num_crtcs; >
diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c index fb719d9aff10..7858e10839f2 100644 --- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_drv.c @@ -545,6 +545,23 @@ static const struct rcar_du_device_info rcar_du_r8a779g0_info = { .dsi_clk_mask = BIT(1) | BIT(0), }; +static const struct rcar_du_device_info rcar_du_r8a779h0_info = { + .gen = 4, + .features = RCAR_DU_FEATURE_CRTC_IRQ + | RCAR_DU_FEATURE_VSP1_SOURCE + | RCAR_DU_FEATURE_NO_BLENDING, + .channels_mask = BIT(0), + .routes = { + /* R8A779H0 has one MIPI DSI output. */ + [RCAR_DU_OUTPUT_DSI0] = { + .possible_crtcs = BIT(0), + .port = 0, + }, + }, + .num_rpf = 5, + .dsi_clk_mask = BIT(0), +}; + static const struct of_device_id rcar_du_of_table[] = { { .compatible = "renesas,du-r8a7742", .data = &rcar_du_r8a7790_info }, { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info }, @@ -571,6 +588,7 @@ static const struct of_device_id rcar_du_of_table[] = { { .compatible = "renesas,du-r8a77995", .data = &rcar_du_r8a7799x_info }, { .compatible = "renesas,du-r8a779a0", .data = &rcar_du_r8a779a0_info }, { .compatible = "renesas,du-r8a779g0", .data = &rcar_du_r8a779g0_info }, + { .compatible = "renesas,du-r8a779h0", .data = &rcar_du_r8a779h0_info }, { } }; diff --git a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c index 0fbf6abbde6e..b9ae6cc43702 100644 --- a/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c +++ b/drivers/gpu/drm/renesas/rcar-du/rcar_du_group.c @@ -107,10 +107,12 @@ static void rcar_du_group_setup_didsr(struct rcar_du_group *rgrp) */ rcrtc = rcdu->crtcs; num_crtcs = rcdu->num_crtcs; - } else if (rcdu->info->gen >= 3 && rgrp->num_crtcs > 1) { + } else if ((rcdu->info->gen == 3 && rgrp->num_crtcs > 1) || + rcdu->info->gen == 4) { /* * On Gen3 dot clocks are setup through per-group registers, * only available when the group has two channels. + * On Gen4 the registers are there for single channel too. */ rcrtc = &rcdu->crtcs[rgrp->index * 2]; num_crtcs = rgrp->num_crtcs;