diff mbox series

[RFC,v8,36/56] KVM: SVM: Add KVM_SEV_SNP_LAUNCH_FINISH command

Message ID 20230220183847.59159-37-michael.roth@amd.com (mailing list archive)
State Not Applicable
Delegated to: Herbert Xu
Headers show
Series Add AMD Secure Nested Paging (SEV-SNP) Hypervisor Support | expand

Commit Message

Michael Roth Feb. 20, 2023, 6:38 p.m. UTC
From: Brijesh Singh <brijesh.singh@amd.com>

The KVM_SEV_SNP_LAUNCH_FINISH finalize the cryptographic digest and stores
it as the measurement of the guest at launch.

While finalizing the launch flow, it also issues the LAUNCH_UPDATE command
to encrypt the VMSA pages.

If its an SNP guest, then VMSA was added in the RMP entry as
a guest owned page and also removed from the kernel direct map
so flush it later after it is transitioned back to hypervisor
state and restored in the direct map.

Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Harald Hoyer <harald@profian.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
---
 .../virt/kvm/x86/amd-memory-encryption.rst    |  23 ++++
 arch/x86/kvm/svm/sev.c                        | 122 ++++++++++++++++++
 include/uapi/linux/kvm.h                      |  14 ++
 3 files changed, 159 insertions(+)

Comments

Alexander Graf March 24, 2023, 2:40 p.m. UTC | #1
On 20.02.23 19:38, Michael Roth wrote:
> From: Brijesh Singh <brijesh.singh@amd.com>
>
> The KVM_SEV_SNP_LAUNCH_FINISH finalize the cryptographic digest and stores
> it as the measurement of the guest at launch.
>
> While finalizing the launch flow, it also issues the LAUNCH_UPDATE command
> to encrypt the VMSA pages.
>
> If its an SNP guest, then VMSA was added in the RMP entry as
> a guest owned page and also removed from the kernel direct map
> so flush it later after it is transitioned back to hypervisor
> state and restored in the direct map.
>
> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
> Signed-off-by: Harald Hoyer <harald@profian.com>
> Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
> Signed-off-by: Michael Roth <michael.roth@amd.com>
> ---
>   .../virt/kvm/x86/amd-memory-encryption.rst    |  23 ++++
>   arch/x86/kvm/svm/sev.c                        | 122 ++++++++++++++++++
>   include/uapi/linux/kvm.h                      |  14 ++
>   3 files changed, 159 insertions(+)
>
[...]


> diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
> index 03dd227f6090..515e22d0dc30 100644
> --- a/arch/x86/kvm/svm/sev.c
> +++ b/arch/x86/kvm/svm/sev.c
> @@ -2280,6 +2280,109 @@ static int snp_launch_update(struct kvm *kvm, struct kvm_sev_cmd *argp)
>                                        snp_launch_update_gfn_handler, argp);
>   }
>
> +static int snp_launch_update_vmsa(struct kvm *kvm, struct kvm_sev_cmd *argp)
> +{
> +       struct kvm_sev_info *sev = &to_kvm_svm(kvm)->sev_info;
> +       struct sev_data_snp_launch_update data = {};
> +       struct kvm_vcpu *vcpu;
> +       unsigned long i;
> +       int ret;
> +
> +       data.gctx_paddr = __psp_pa(sev->snp_context);
> +       data.page_type = SNP_PAGE_TYPE_VMSA;
> +
> +       kvm_for_each_vcpu(i, vcpu, kvm) {
> +               struct vcpu_svm *svm = to_svm(vcpu);
> +               u64 pfn = __pa(svm->sev_es.vmsa) >> PAGE_SHIFT;
> +
> +               /* Perform some pre-encryption checks against the VMSA */
> +               ret = sev_es_sync_vmsa(svm);
> +               if (ret)
> +                       return ret;
> +
> +               /* Transition the VMSA page to a firmware state. */
> +               ret = rmp_make_private(pfn, -1, PG_LEVEL_4K, sev->asid, true);
> +               if (ret)
> +                       return ret;
> +
> +               /* Issue the SNP command to encrypt the VMSA */
> +               data.address = __sme_pa(svm->sev_es.vmsa);
> +               ret = __sev_issue_cmd(argp->sev_fd, SEV_CMD_SNP_LAUNCH_UPDATE,
> +                                     &data, &argp->error);


There is no contract in KVM that dictates that the first entry in the 
vcpu list needs to be vcpu_id==0 (BSP). That means if you use a user 
space that spawns vCPUs in parallel on init, you will end up with the 
BSP behind APs in the LAUNCH_UPDATE order.

This is a problem because for LAUNCH_UPDATE, the order matters. BSP and 
AP vCPUs have different initial state and so if you want to reconstruct 
the launch digest, you need to ensure that the guest knows the order.

The easiest way I can think of to fix this is to call 
snp_launch_update_vmsa twice: Once filtering for vcpu_id == 0 and once 
for vcpu_id != 0.


Thanks,

Alex





Amazon Development Center Germany GmbH
Krausenstr. 38
10117 Berlin
Geschaeftsfuehrung: Christian Schlaeger, Jonathan Weiss
Eingetragen am Amtsgericht Charlottenburg unter HRB 149173 B
Sitz: Berlin
Ust-ID: DE 289 237 879
diff mbox series

Patch

diff --git a/Documentation/virt/kvm/x86/amd-memory-encryption.rst b/Documentation/virt/kvm/x86/amd-memory-encryption.rst
index c94be8e6d657..dafb0c9984f1 100644
--- a/Documentation/virt/kvm/x86/amd-memory-encryption.rst
+++ b/Documentation/virt/kvm/x86/amd-memory-encryption.rst
@@ -513,6 +513,29 @@  Returns: 0 on success, -negative on error
 See the SEV-SNP spec for further details on how to build the VMPL permission
 mask and page type.
 
+21. KVM_SNP_LAUNCH_FINISH
+-------------------------
+
+After completion of the SNP guest launch flow, the KVM_SNP_LAUNCH_FINISH command can be
+issued to make the guest ready for the execution.
+
+Parameters (in): struct kvm_sev_snp_launch_finish
+
+Returns: 0 on success, -negative on error
+
+::
+
+        struct kvm_sev_snp_launch_finish {
+                __u64 id_block_uaddr;
+                __u64 id_auth_uaddr;
+                __u8 id_block_en;
+                __u8 auth_key_en;
+                __u8 host_data[32];
+                __u8 pad[6];
+        };
+
+
+See SEV-SNP specification for further details on launch finish input parameters.
 
 References
 ==========
diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index 03dd227f6090..515e22d0dc30 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -2280,6 +2280,109 @@  static int snp_launch_update(struct kvm *kvm, struct kvm_sev_cmd *argp)
 				      snp_launch_update_gfn_handler, argp);
 }
 
+static int snp_launch_update_vmsa(struct kvm *kvm, struct kvm_sev_cmd *argp)
+{
+	struct kvm_sev_info *sev = &to_kvm_svm(kvm)->sev_info;
+	struct sev_data_snp_launch_update data = {};
+	struct kvm_vcpu *vcpu;
+	unsigned long i;
+	int ret;
+
+	data.gctx_paddr = __psp_pa(sev->snp_context);
+	data.page_type = SNP_PAGE_TYPE_VMSA;
+
+	kvm_for_each_vcpu(i, vcpu, kvm) {
+		struct vcpu_svm *svm = to_svm(vcpu);
+		u64 pfn = __pa(svm->sev_es.vmsa) >> PAGE_SHIFT;
+
+		/* Perform some pre-encryption checks against the VMSA */
+		ret = sev_es_sync_vmsa(svm);
+		if (ret)
+			return ret;
+
+		/* Transition the VMSA page to a firmware state. */
+		ret = rmp_make_private(pfn, -1, PG_LEVEL_4K, sev->asid, true);
+		if (ret)
+			return ret;
+
+		/* Issue the SNP command to encrypt the VMSA */
+		data.address = __sme_pa(svm->sev_es.vmsa);
+		ret = __sev_issue_cmd(argp->sev_fd, SEV_CMD_SNP_LAUNCH_UPDATE,
+				      &data, &argp->error);
+		if (ret) {
+			snp_page_reclaim(pfn);
+			return ret;
+		}
+
+		svm->vcpu.arch.guest_state_protected = true;
+	}
+
+	return 0;
+}
+
+static int snp_launch_finish(struct kvm *kvm, struct kvm_sev_cmd *argp)
+{
+	struct kvm_sev_info *sev = &to_kvm_svm(kvm)->sev_info;
+	struct kvm_sev_snp_launch_finish params;
+	struct sev_data_snp_launch_finish *data;
+	void *id_block = NULL, *id_auth = NULL;
+	int ret;
+
+	if (!sev_snp_guest(kvm))
+		return -ENOTTY;
+
+	if (!sev->snp_context)
+		return -EINVAL;
+
+	if (copy_from_user(&params, (void __user *)(uintptr_t)argp->data, sizeof(params)))
+		return -EFAULT;
+
+	/* Measure all vCPUs using LAUNCH_UPDATE before finalizing the launch flow. */
+	ret = snp_launch_update_vmsa(kvm, argp);
+	if (ret)
+		return ret;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL_ACCOUNT);
+	if (!data)
+		return -ENOMEM;
+
+	if (params.id_block_en) {
+		id_block = psp_copy_user_blob(params.id_block_uaddr, KVM_SEV_SNP_ID_BLOCK_SIZE);
+		if (IS_ERR(id_block)) {
+			ret = PTR_ERR(id_block);
+			goto e_free;
+		}
+
+		data->id_block_en = 1;
+		data->id_block_paddr = __sme_pa(id_block);
+
+		id_auth = psp_copy_user_blob(params.id_auth_uaddr, KVM_SEV_SNP_ID_AUTH_SIZE);
+		if (IS_ERR(id_auth)) {
+			ret = PTR_ERR(id_auth);
+			goto e_free_id_block;
+		}
+
+		data->id_auth_paddr = __sme_pa(id_auth);
+
+		if (params.auth_key_en)
+			data->auth_key_en = 1;
+	}
+
+	memcpy(data->host_data, params.host_data, KVM_SEV_SNP_FINISH_DATA_SIZE);
+	data->gctx_paddr = __psp_pa(sev->snp_context);
+	ret = sev_issue_cmd(kvm, SEV_CMD_SNP_LAUNCH_FINISH, data, &argp->error);
+
+	kfree(id_auth);
+
+e_free_id_block:
+	kfree(id_block);
+
+e_free:
+	kfree(data);
+
+	return ret;
+}
+
 int sev_mem_enc_ioctl(struct kvm *kvm, void __user *argp)
 {
 	struct kvm_sev_cmd sev_cmd;
@@ -2376,6 +2479,9 @@  int sev_mem_enc_ioctl(struct kvm *kvm, void __user *argp)
 	case KVM_SEV_SNP_LAUNCH_UPDATE:
 		r = snp_launch_update(kvm, &sev_cmd);
 		break;
+	case KVM_SEV_SNP_LAUNCH_FINISH:
+		r = snp_launch_finish(kvm, &sev_cmd);
+		break;
 	default:
 		r = -EINVAL;
 		goto out;
@@ -2831,11 +2937,27 @@  void sev_free_vcpu(struct kvm_vcpu *vcpu)
 
 	svm = to_svm(vcpu);
 
+	/*
+	 * If its an SNP guest, then VMSA was added in the RMP entry as
+	 * a guest owned page. Transition the page to hypervisor state
+	 * before releasing it back to the system.
+	 * Also the page is removed from the kernel direct map, so flush it
+	 * later after it is transitioned back to hypervisor state and
+	 * restored in the direct map.
+	 */
+	if (sev_snp_guest(vcpu->kvm)) {
+		u64 pfn = __pa(svm->sev_es.vmsa) >> PAGE_SHIFT;
+
+		if (host_rmp_make_shared(pfn, PG_LEVEL_4K, true))
+			goto skip_vmsa_free;
+	}
+
 	if (vcpu->arch.guest_state_protected)
 		sev_flush_encrypted_page(vcpu, svm->sev_es.vmsa);
 
 	__free_page(virt_to_page(svm->sev_es.vmsa));
 
+skip_vmsa_free:
 	if (svm->sev_es.ghcb_sa_free)
 		kvfree(svm->sev_es.ghcb_sa);
 }
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index 4098bba17aa4..2bab08a5b5d7 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -1921,6 +1921,7 @@  enum sev_cmd_id {
 	KVM_SEV_SNP_INIT,
 	KVM_SEV_SNP_LAUNCH_START,
 	KVM_SEV_SNP_LAUNCH_UPDATE,
+	KVM_SEV_SNP_LAUNCH_FINISH,
 
 	KVM_SEV_NR_MAX,
 };
@@ -2055,6 +2056,19 @@  struct kvm_sev_snp_launch_update {
 	__u8 vmpl1_perms;
 };
 
+#define KVM_SEV_SNP_ID_BLOCK_SIZE	96
+#define KVM_SEV_SNP_ID_AUTH_SIZE	4096
+#define KVM_SEV_SNP_FINISH_DATA_SIZE	32
+
+struct kvm_sev_snp_launch_finish {
+	__u64 id_block_uaddr;
+	__u64 id_auth_uaddr;
+	__u8 id_block_en;
+	__u8 auth_key_en;
+	__u8 host_data[KVM_SEV_SNP_FINISH_DATA_SIZE];
+	__u8 pad[6];
+};
+
 #define KVM_DEV_ASSIGN_ENABLE_IOMMU	(1 << 0)
 #define KVM_DEV_ASSIGN_PCI_2_3		(1 << 1)
 #define KVM_DEV_ASSIGN_MASK_INTX	(1 << 2)