[2/3] crypto: jitter - Allow configuration of memory size

Commit Message

Stephan Mueller Sept. 21, 2023, 11:48 a.m. UTC

The memory size consumed by the Jitter RNG is one contributing factor in
the amount of entropy that is gathered. As the amount of entropy
directly correlates with the distance of the memory from the CPU, the
caches that are possibly present on a given system have an impact on the
collected entropy.

Thus, the kernel compile time should offer a means to configure the
amount of memory used by the Jitter RNG. Although this option could be
turned into a runtime option (e.g. a kernel command line option), it
should remain a compile time option as otherwise adminsitrators who may
not have performed an entropy assessment may select a value that is
inappropriate.

The default value selected by the configuration is identical to the
current Jitter RNG value. Thus, the patch should not lead to any change
in the Jitter RNG behavior.

To accommodate larger memory buffers, kvzalloc / kvfree is used.

Signed-off-by: Stephan Mueller <[e-mail]>
---
 crypto/Kconfig               | 43 ++++++++++++++++++++++++++++++++++++
 crypto/jitterentropy-kcapi.c | 11 +++++++++
 crypto/jitterentropy.c       | 16 ++++++++------
 crypto/jitterentropy.h       |  2 ++
 4 files changed, 65 insertions(+), 7 deletions(-)

Patch

diff --git a/crypto/Kconfig b/crypto/Kconfig
index 650b1b3620d8..00c827d9f0d2 100644
--- a/crypto/Kconfig
+++ b/crypto/Kconfig
@@ -1296,6 +1296,49 @@  config CRYPTO_JITTERENTROPY
 
 	  See https://www.chronox.de/jent.html
 
+choice
+	prompt "CPU Jitter RNG Memory Size"
+	default CRYPTO_JITTERENTROPY_MEMSIZE_2
+	depends on CRYPTO_JITTERENTROPY
+	help
+	  The Jitter RNG measures the execution time of memory accesses.
+	  Multiple consecutive memory accesses are performed. If the memory
+	  size fits into a cache (e.g. L1), only the memory access timing
+	  to that cache is measured. The closer the cache is to the CPU
+	  the less variations are measured and thus the less entropy is
+	  obtained. Thus, if the memory size fits into the L1 cache, the
+	  obtained entropy is less than if the memory size fits within
+	  L1 + L2, which in turn is less if the memory fits into
+	  L1 + L2 + L3. Thus, by selecting a different memory size,
+	  the entropy rate produced by the Jitter RNG can be modified.
+
+	config CRYPTO_JITTERENTROPY_MEMSIZE_2
+		bool "2048 Bytes (default)"
+
+	config CRYPTO_JITTERENTROPY_MEMSIZE_128
+		bool "128 kBytes"
+
+	config CRYPTO_JITTERENTROPY_MEMSIZE_1024
+		bool "1024 kBytes"
+
+	config CRYPTO_JITTERENTROPY_MEMSIZE_8192
+		bool "8192 kBytes"
+endchoice
+
+config CRYPTO_JITTERENTROPY_MEMORY_BLOCKS
+	int
+	default 64 if CRYPTO_JITTERENTROPY_MEMSIZE_2
+	default 512 if CRYPTO_JITTERENTROPY_MEMSIZE_128
+	default 1024 if CRYPTO_JITTERENTROPY_MEMSIZE_1024
+	default 4096 if CRYPTO_JITTERENTROPY_MEMSIZE_8192
+
+config CRYPTO_JITTERENTROPY_MEMORY_BLOCKSIZE
+	int
+	default 32 if CRYPTO_JITTERENTROPY_MEMSIZE_2
+	default 256 if CRYPTO_JITTERENTROPY_MEMSIZE_128
+	default 1024 if CRYPTO_JITTERENTROPY_MEMSIZE_1024
+	default 2048 if CRYPTO_JITTERENTROPY_MEMSIZE_8192
+
 config CRYPTO_JITTERENTROPY_TESTINTERFACE
 	bool "CPU Jitter RNG Test Interface"
 	depends on CRYPTO_JITTERENTROPY
diff --git a/crypto/jitterentropy-kcapi.c b/crypto/jitterentropy-kcapi.c
index 1de730f94683..a8e7bbd28c6e 100644
--- a/crypto/jitterentropy-kcapi.c
+++ b/crypto/jitterentropy-kcapi.c
@@ -54,6 +54,17 @@ 
  * Helper function
  ***************************************************************************/
 
+void *jent_kvzalloc(unsigned int len)
+{
+	return kvzalloc(len, GFP_KERNEL);
+}
+
+void jent_kvzfree(void *ptr, unsigned int len)
+{
+	memzero_explicit(ptr, len);
+	kvfree(ptr);
+}
+
 void *jent_zalloc(unsigned int len)
 {
 	return kzalloc(len, GFP_KERNEL);
diff --git a/crypto/jitterentropy.c b/crypto/jitterentropy.c
index c99734af82b8..f224ceb1e2e3 100644
--- a/crypto/jitterentropy.c
+++ b/crypto/jitterentropy.c
@@ -75,10 +75,10 @@  struct rand_data {
 
 	unsigned int flags;		/* Flags used to initialize */
 	unsigned int osr;		/* Oversample rate */
-#define JENT_MEMORY_BLOCKS 64
-#define JENT_MEMORY_BLOCKSIZE 32
 #define JENT_MEMORY_ACCESSLOOPS 128
-#define JENT_MEMORY_SIZE (JENT_MEMORY_BLOCKS*JENT_MEMORY_BLOCKSIZE)
+#define JENT_MEMORY_SIZE						\
+	(CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKS *			\
+	 CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKSIZE)
 	unsigned char *mem;	/* Memory access location with size of
 				 * memblocks * memblocksize */
 	unsigned int memlocation; /* Pointer to byte in *mem */
@@ -650,13 +650,15 @@  struct rand_data *jent_entropy_collector_alloc(unsigned int osr,
 		/* Allocate memory for adding variations based on memory
 		 * access
 		 */
-		entropy_collector->mem = jent_zalloc(JENT_MEMORY_SIZE);
+		entropy_collector->mem = jent_kvzalloc(JENT_MEMORY_SIZE);
 		if (!entropy_collector->mem) {
 			jent_zfree(entropy_collector);
 			return NULL;
 		}
-		entropy_collector->memblocksize = JENT_MEMORY_BLOCKSIZE;
-		entropy_collector->memblocks = JENT_MEMORY_BLOCKS;
+		entropy_collector->memblocksize =
+			CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKSIZE;
+		entropy_collector->memblocks =
+			CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKS;
 		entropy_collector->memaccessloops = JENT_MEMORY_ACCESSLOOPS;
 	}
 
@@ -679,7 +681,7 @@  struct rand_data *jent_entropy_collector_alloc(unsigned int osr,
 
 void jent_entropy_collector_free(struct rand_data *entropy_collector)
 {
-	jent_zfree(entropy_collector->mem);
+	jent_kvzfree(entropy_collector->mem, JENT_MEMORY_SIZE);
 	entropy_collector->mem = NULL;
 	jent_zfree(entropy_collector);
 }
diff --git a/crypto/jitterentropy.h b/crypto/jitterentropy.h
index 626c6228b7e2..e31661ee00d3 100644
--- a/crypto/jitterentropy.h
+++ b/crypto/jitterentropy.h
@@ -1,5 +1,7 @@ 
 // SPDX-License-Identifier: GPL-2.0-or-later
 
+extern void *jent_kvzalloc(unsigned int len);
+extern void jent_kvzfree(void *ptr, unsigned int len);
 extern void *jent_zalloc(unsigned int len);
 extern void jent_zfree(void *ptr);
 extern void jent_get_nstime(__u64 *out);