new file mode 100644
@@ -0,0 +1,46 @@
+/*
+ * Copyright 2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_DAVINCI_SPI_H
+#define __ARCH_ARM_DAVINCI_SPI_H
+
+#define DAVINCI_SPI_INTERN_CS 0xFF
+
+enum {
+ DAVINCI_SPI_VERSION_1, /* For DM355/DM365/DM6467*/
+ DAVINCI_SPI_VERSION_2, /* For DA8xx */
+};
+
+struct davinci_spi_platform_data {
+ u8 version;
+ u16 num_chipselect;
+ u8 *chip_sel;
+ u32 wdelay;
+ u32 odd_parity;
+ u32 parity_enable;
+ u32 wait_enable;
+ u32 timer_disable;
+ u32 clk_internal;
+ u32 cs_hold;
+ u32 intr_level;
+ u32 poll_mode;
+ u8 c2tdelay;
+ u8 t2cdelay;
+};
+
+#endif /* __ARCH_ARM_DAVINCI_SPI_H */
@@ -77,6 +77,13 @@ config SPI_AU1550
This driver can also be built as a module. If so, the module
will be called au1550_spi.
+config SPI_DAVINCI
+ tristate "SPI controller driver for DaVinci and DA8xx SoC's"
+ depends on SPI_MASTER && ARCH_DAVINCI
+ select SPI_BITBANG
+ help
+ SPI master controller for DaVinci and DA8xx SPI modules.
+
config SPI_BITBANG
tristate "Utilities for Bitbanging SPI masters"
help
@@ -31,6 +31,7 @@ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx.o
obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
+obj-$(CONFIG_SPI_DAVINCI) += davinci_spi.o
# ... add above this line ...
# SPI protocol drivers (device/link on bus)
new file mode 100644
@@ -0,0 +1,778 @@
+/*
+ * Copyright (C) 2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+
+#include <mach/spi.h>
+
+#include "davinci_spi.h"
+
+struct device *sdev;
+
+static void davinci_spi_rx_buf_u8(u32 data, struct davinci_spi *davinci_spi)
+{
+ u8 *rx = davinci_spi->rx;
+
+ *rx++ = (u8)data;
+ davinci_spi->rx = rx;
+}
+
+static void davinci_spi_rx_buf_u16(u32 data, struct davinci_spi *davinci_spi)
+{
+ u16 *rx = davinci_spi->rx;
+
+ *rx++ = (u16)data;
+ davinci_spi->rx = rx;
+}
+
+static u32 davinci_spi_tx_buf_u8(struct davinci_spi *davinci_spi)
+{
+ u32 data;
+ const u8 *tx = davinci_spi->tx;
+
+ data = *tx++;
+ davinci_spi->tx = tx;
+ return data;
+}
+
+static u32 davinci_spi_tx_buf_u16(struct davinci_spi *davinci_spi)
+{
+ u32 data;
+ const u16 *tx = davinci_spi->tx;
+
+ data = *tx++;
+ davinci_spi->tx = tx;
+ return data;
+}
+
+static inline void set_bits(void __iomem *addr, u32 bits)
+{
+ u32 v = ioread32(addr);
+
+ v |= bits;
+ iowrite32(v, addr);
+}
+
+static inline void clear_bits(void __iomem *addr, u32 bits)
+{
+ u32 v = ioread32(addr);
+
+ v &= ~bits;
+ iowrite32(v, addr);
+}
+
+static inline void set_fmt_bits(void __iomem *addr, u32 bits, int bus_num)
+{
+ set_bits(addr + SPIFMT0 + (0x4 * bus_num), bits);
+}
+
+static inline void clear_fmt_bits(void __iomem *addr, u32 bits, int bus_num)
+{
+ clear_bits(addr + SPIFMT0 + (0x4 * bus_num), bits);
+}
+
+/*
+ * Interface to control the chip select signal
+ * Chipselects can be either internal CS or GPIOs
+ * In the platform data structure of SOC specific code,
+ * there is a "chip_sel" array which needs to be filled with the
+ * information pertaining to which GPIOs are used as chip selects
+ */
+static void davinci_spi_chipselect(struct spi_device *spi, int value)
+{
+ struct davinci_spi *davinci_spi;
+ struct davinci_spi_platform_data *pdata;
+ u32 data1_reg_val = 0;
+
+ davinci_spi = spi_master_get_devdata(spi->master);
+ pdata = davinci_spi->pdata;
+
+ /*
+ * Board specific chip select logic decides the polarity and cs
+ * line for the controller
+ */
+ if (value == BITBANG_CS_INACTIVE) {
+ /* set all chip select high */
+ if (pdata->chip_sel != NULL) {
+ if (pdata->chip_sel[spi->chip_select] !=
+ DAVINCI_SPI_INTERN_CS)
+ gpio_set_value(
+ pdata->chip_sel[spi->chip_select], 1);
+ }
+
+ set_bits(davinci_spi->base + SPIDEF, CS_DEFAULT);
+
+ data1_reg_val |= CS_DEFAULT << DAVINCI_SPIDAT1_CSNR_SHIFT;
+ iowrite32(data1_reg_val, davinci_spi->base + SPIDAT1);
+
+ while ((ioread32(davinci_spi->base + SPIBUF)
+ & DAVINCI_SPIBUF_RXEMPTY_MASK) == 0)
+ cpu_relax();
+ }
+}
+
+/*
+ * davinci_spi_setup_transfer - This functions will determine transfer method
+ * @spi: spi device on which data transfer to be done
+ * @t: spi transfer in which transfer info is filled
+ *
+ * This function determines data transfer method (8/16/32 bit transfer).
+ * It will also set the SPI Clock Control register according to
+ * SPI slave device freq.
+ */
+static int davinci_spi_setup_transfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+
+ struct davinci_spi *davinci_spi;
+ struct davinci_spi_platform_data *pdata;
+ u8 bits_per_word = 0;
+ u32 hz = 0, prescale;
+
+ davinci_spi = spi_master_get_devdata(spi->master);
+ pdata = davinci_spi->pdata;
+
+ if (t) {
+ bits_per_word = t->bits_per_word;
+ hz = t->speed_hz;
+ }
+
+ /* if bits_per_word is not set then set it default */
+ if (!bits_per_word)
+ bits_per_word = spi->bits_per_word;
+
+ /*
+ * Assign function pointer to appropriate transfer method
+ * 8bit, 16bit or 32bit transfer
+ */
+ if (bits_per_word <= 8 && bits_per_word >= 2) {
+ davinci_spi->get_rx = davinci_spi_rx_buf_u8;
+ davinci_spi->get_tx = davinci_spi_tx_buf_u8;
+ davinci_spi->slave[spi->chip_select].bytes_per_word = 1;
+ } else if (bits_per_word <= 16 && bits_per_word >= 2) {
+ davinci_spi->get_rx = davinci_spi_rx_buf_u16;
+ davinci_spi->get_tx = davinci_spi_tx_buf_u16;
+ davinci_spi->slave[spi->chip_select].bytes_per_word = 2;
+ } else
+ return -EINVAL;
+
+ if (!hz)
+ hz = spi->max_speed_hz;
+
+ clear_fmt_bits(davinci_spi->base, DAVINCI_SPIFMT_CHARLEN_MASK,
+ spi->master->bus_num);
+ set_fmt_bits(davinci_spi->base, bits_per_word & 0x1f,
+ spi->master->bus_num);
+
+ prescale = ((clk_get_rate(davinci_spi->clk) / hz) - 1) & 0xff;
+
+ clear_fmt_bits(davinci_spi->base, 0x0000ff00, spi->master->bus_num);
+ set_fmt_bits(davinci_spi->base, prescale << 8, spi->master->bus_num);
+
+ return 0;
+}
+
+/*
+ * davinci_spi_setup - This functions will set default transfer method
+ * @spi: spi device on which data transfer to be done
+ *
+ * This functions sets the default transfer method.
+ */
+
+static int davinci_spi_setup(struct spi_device *spi)
+{
+ int retval;
+ struct davinci_spi *davinci_spi;
+
+ davinci_spi = spi_master_get_devdata(spi->master);
+
+ /* if bits per word length is zero then set it default 8 */
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+ /*
+ * SPI in DaVinci and DA8xx operate between
+ * 600 KHz and 50 MHz
+ */
+ if (spi->max_speed_hz < 600000 || spi->max_speed_hz > 50000000)
+ return -EINVAL;
+
+ retval = davinci_spi_setup_transfer(spi, NULL);
+
+ return retval;
+}
+
+static int davinci_spi_bufs_prep(struct spi_device *spi,
+ struct davinci_spi *davinci_spi)
+{
+ int op_mode = 0;
+
+ /* configuraton parameter for SPI */
+ if (spi->mode & SPI_LSB_FIRST)
+ set_fmt_bits(davinci_spi->base, DAVINCI_SPIFMT_SHIFTDIR_MASK,
+ spi->master->bus_num);
+ else
+ clear_fmt_bits(davinci_spi->base, DAVINCI_SPIFMT_SHIFTDIR_MASK,
+ spi->master->bus_num);
+
+ if (spi->mode & SPI_CPOL)
+ set_fmt_bits(davinci_spi->base, DAVINCI_SPIFMT_POLARITY_MASK,
+ spi->master->bus_num);
+ else
+ clear_fmt_bits(davinci_spi->base, DAVINCI_SPIFMT_POLARITY_MASK,
+ spi->master->bus_num);
+
+ if (spi->mode & SPI_CPHA)
+ set_fmt_bits(davinci_spi->base, DAVINCI_SPIFMT_PHASE_MASK,
+ spi->master->bus_num);
+ else
+ clear_fmt_bits(davinci_spi->base, DAVINCI_SPIFMT_PHASE_MASK,
+ spi->master->bus_num);
+
+ if (davinci_spi->version == DAVINCI_SPI_VERSION_2) {
+ clear_fmt_bits(davinci_spi->base, DAVINCI_SPIFMT_WDELAY_MASK,
+ spi->master->bus_num);
+ set_fmt_bits(davinci_spi->base,
+ ((davinci_spi->pdata->wdelay <<
+ DAVINCI_SPIFMT_WDELAY_SHIFT) &
+ DAVINCI_SPIFMT_WDELAY_MASK),
+ spi->master->bus_num);
+
+ if (davinci_spi->pdata->odd_parity)
+ set_fmt_bits(davinci_spi->base,
+ DAVINCI_SPIFMT_ODD_PARITY_MASK,
+ spi->master->bus_num);
+ else
+ clear_fmt_bits(davinci_spi->base,
+ DAVINCI_SPIFMT_ODD_PARITY_MASK,
+ spi->master->bus_num);
+
+ if (davinci_spi->pdata->parity_enable)
+ set_fmt_bits(davinci_spi->base,
+ DAVINCI_SPIFMT_PARITYENA_MASK,
+ spi->master->bus_num);
+ else
+ clear_fmt_bits(davinci_spi->base,
+ DAVINCI_SPIFMT_PARITYENA_MASK,
+ spi->master->bus_num);
+
+ if (davinci_spi->pdata->wait_enable)
+ set_fmt_bits(davinci_spi->base,
+ DAVINCI_SPIFMT_WAITENA_MASK,
+ spi->master->bus_num);
+ else
+ clear_fmt_bits(davinci_spi->base,
+ DAVINCI_SPIFMT_WAITENA_MASK,
+ spi->master->bus_num);
+
+ if (davinci_spi->pdata->timer_disable)
+ set_fmt_bits(davinci_spi->base,
+ DAVINCI_SPIFMT_DISTIMER_MASK,
+ spi->master->bus_num);
+ else
+ clear_fmt_bits(davinci_spi->base,
+ DAVINCI_SPIFMT_DISTIMER_MASK,
+ spi->master->bus_num);
+ }
+
+ /* Clock internal */
+ if (davinci_spi->pdata->clk_internal)
+ set_bits(davinci_spi->base + SPIGCR1,
+ DAVINCI_SPIGCR1_CLKMOD_MASK);
+ else
+ clear_bits(davinci_spi->base + SPIGCR1,
+ DAVINCI_SPIGCR1_CLKMOD_MASK);
+
+ /* master mode default */
+ set_bits(davinci_spi->base + SPIGCR1, DAVINCI_SPIGCR1_MASTER_MASK);
+
+ if (davinci_spi->pdata->intr_level)
+ iowrite32(DAVINCI_SPI_INTLVL_1, davinci_spi->base + SPILVL);
+ else
+ iowrite32(DAVINCI_SPI_INTLVL_0, davinci_spi->base + SPILVL);
+
+ /*
+ * Standard SPI mode uses 4 pins, with chipselect
+ * 3 pin SPI is a 4 pin variant without CS (SPI_NO_CS)
+ * (distinct from SPI_3WIRE, with just one data wire;
+ * or similar variants without MOSI or without MISO)
+ * 4 pin with enable is (SPI_READY | SPI_NO_CS)
+ * 5 pin SPI variant is standard SPI plus SPI_READY
+ */
+
+ op_mode = DAVINCI_SPIPC0_DIFUN_MASK
+ | DAVINCI_SPIPC0_DOFUN_MASK
+ | DAVINCI_SPIPC0_CLKFUN_MASK;
+ if (!(spi->mode & SPI_NO_CS))
+ op_mode |= 1 << spi->chip_select;
+ if (spi->mode & SPI_READY)
+ op_mode |= DAVINCI_SPIPC0_SPIENA_MASK;
+
+ iowrite32(op_mode, davinci_spi->base + SPIPC0);
+
+ if (spi->mode & SPI_LOOP)
+ set_bits(davinci_spi->base + SPIGCR1,
+ DAVINCI_SPIGCR1_LOOPBACK_MASK);
+ else
+ clear_bits(davinci_spi->base + SPIGCR1,
+ DAVINCI_SPIGCR1_LOOPBACK_MASK);
+
+ return 0;
+}
+
+static int davinci_spi_check_error(struct davinci_spi *davinci_spi,
+ int int_status)
+{
+
+ if (int_status & DAVINCI_SPIFLG_TIMEOUT_MASK) {
+ dev_dbg(sdev, "SPI Time-out Error\n");
+ return -ETIMEDOUT;
+ }
+ if (int_status & DAVINCI_SPIFLG_DESYNC_MASK) {
+ dev_dbg(sdev, "SPI Desynchronization Error\n");
+ return -EIO;
+ }
+ if (int_status & DAVINCI_SPIFLG_BITERR_MASK) {
+ dev_dbg(sdev, "SPI Bit error\n");
+ return -EIO;
+ }
+
+ if (davinci_spi->version == DAVINCI_SPI_VERSION_2) {
+ if (int_status & DAVINCI_SPIFLG_DLEN_ERR_MASK) {
+ dev_dbg(sdev, "SPI Data Length Error\n");
+ return -EIO;
+ }
+ if (int_status & DAVINCI_SPIFLG_PARERR_MASK) {
+ dev_dbg(sdev, "SPI Parity Error\n");
+ return -EIO;
+ }
+ if (int_status & DAVINCI_SPIFLG_OVRRUN_MASK) {
+ dev_dbg(sdev, "SPI Data Overrun error\n");
+ return -EIO;
+ }
+ if (int_status & DAVINCI_SPIFLG_TX_INTR_MASK) {
+ dev_dbg(sdev, "SPI TX intr bit set\n");
+ return -EIO;
+ }
+ if (int_status & DAVINCI_SPIFLG_BUF_INIT_ACTIVE_MASK) {
+ dev_dbg(sdev, "SPI Buffer Init Active\n");
+ return -EBUSY;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * davinci_spi_bufs - functions which will handle transfer data
+ * @spi: spi device on which data transfer to be done
+ * @t: spi transfer in which transfer info is filled
+ *
+ * This function will put data to be transferred into data register
+ * of SPI controller and then wait untill the completion will be marked
+ * by the IRQ Handler.
+ */
+static int davinci_spi_bufs_pio(struct spi_device *spi, struct spi_transfer *t)
+{
+ struct davinci_spi *davinci_spi;
+ int int_status, count, ret;
+ u8 conv, tmp;
+ u32 tx_data, data1_reg_val;
+ u32 buf_val, flg_val;
+ struct davinci_spi_platform_data *pdata;
+
+ davinci_spi = spi_master_get_devdata(spi->master);
+ pdata = davinci_spi->pdata;
+
+ davinci_spi->tx = t->tx_buf;
+ davinci_spi->rx = t->rx_buf;
+
+ /* convert len to words bbased on bits_per_word */
+ conv = davinci_spi->slave[spi->chip_select].bytes_per_word;
+ davinci_spi->count = t->len / conv;
+
+ INIT_COMPLETION(davinci_spi->done);
+
+ ret = davinci_spi_bufs_prep(spi, davinci_spi);
+ if (ret)
+ return ret;
+
+ /* Enable SPI */
+ set_bits(davinci_spi->base + SPIGCR1, DAVINCI_SPIGCR1_SPIENA_MASK);
+
+ iowrite32(0 | (pdata->c2tdelay << DAVINCI_SPI_C2TDELAY_SHIFT) |
+ (pdata->t2cdelay << DAVINCI_SPI_T2CDELAY_SHIFT),
+ davinci_spi->base + SPIDELAY);
+
+ count = davinci_spi->count;
+ data1_reg_val = pdata->cs_hold << DAVINCI_SPIDAT1_CSHOLD_SHIFT;
+ tmp = ~(0x1 << spi->chip_select);
+
+ /* checking for GPIO */
+ if ((pdata->chip_sel != NULL) &&
+ (pdata->chip_sel[spi->chip_select] != DAVINCI_SPI_INTERN_CS))
+ gpio_set_value(pdata->chip_sel[spi->chip_select], 0);
+ else
+ clear_bits(davinci_spi->base + SPIDEF, ~tmp);
+
+ data1_reg_val |= tmp << DAVINCI_SPIDAT1_CSNR_SHIFT;
+
+ while ((ioread32(davinci_spi->base + SPIBUF)
+ & DAVINCI_SPIBUF_RXEMPTY_MASK) == 0)
+ cpu_relax();
+
+ /* Determine the command to execute READ or WRITE */
+ if (t->tx_buf) {
+ clear_bits(davinci_spi->base + SPIINT, DAVINCI_SPIINT_MASKALL);
+
+ while (1) {
+ tx_data = davinci_spi->get_tx(davinci_spi);
+
+ data1_reg_val &= ~(0xFFFF);
+ data1_reg_val |= (0xFFFF & tx_data);
+
+ buf_val = ioread32(davinci_spi->base + SPIBUF);
+ if ((buf_val & DAVINCI_SPIBUF_TXFULL_MASK) == 0) {
+ iowrite32(data1_reg_val,
+ davinci_spi->base + SPIDAT1);
+
+ count--;
+ }
+ while (ioread32(davinci_spi->base + SPIBUF)
+ & DAVINCI_SPIBUF_RXEMPTY_MASK)
+ cpu_relax();
+
+ /* getting the returned byte */
+ if (t->rx_buf) {
+ buf_val = ioread32(davinci_spi->base + SPIBUF);
+ davinci_spi->get_rx(buf_val, davinci_spi);
+ }
+ if (count <= 0)
+ break;
+ }
+ } else {
+ if (pdata->poll_mode) {
+ while (1) {
+ /* keeps the serial clock going */
+ if ((ioread32(davinci_spi->base + SPIBUF)
+ & DAVINCI_SPIBUF_TXFULL_MASK) == 0)
+ iowrite32(data1_reg_val,
+ davinci_spi->base + SPIDAT1);
+
+ while (ioread32(davinci_spi->base + SPIBUF) &
+ DAVINCI_SPIBUF_RXEMPTY_MASK)
+ cpu_relax();
+
+ flg_val = ioread32(davinci_spi->base + SPIFLG);
+ buf_val = ioread32(davinci_spi->base + SPIBUF);
+
+ davinci_spi->get_rx(buf_val, davinci_spi);
+
+ count--;
+ if (count <= 0)
+ break;
+ }
+ } else { /* Receive in Interrupt mode */
+ int i;
+
+ for (i = 0; i < davinci_spi->count; i++) {
+ set_bits(davinci_spi->base + SPIINT,
+ DAVINCI_SPIINT_BITERR_INTR
+ | DAVINCI_SPIINT_OVRRUN_INTR
+ | DAVINCI_SPIINT_RX_INTR);
+
+ iowrite32(data1_reg_val,
+ davinci_spi->base + SPIDAT1);
+
+ while (ioread32(davinci_spi->base + SPIINT) &
+ DAVINCI_SPIINT_RX_INTR)
+ cpu_relax();
+ }
+ iowrite32((data1_reg_val & 0x0ffcffff),
+ davinci_spi->base + SPIDAT1);
+ }
+ }
+
+ /*
+ * Check for bit error, desync error,parity error,timeout error and
+ * receive overflow errors
+ */
+ int_status = ioread32(davinci_spi->base + SPIFLG);
+
+ ret = davinci_spi_check_error(davinci_spi, int_status);
+ if (ret != 0)
+ return ret;
+
+ /* SPI Framework maintains the count only in bytes so convert back */
+ davinci_spi->count *= conv;
+
+ return t->len;
+}
+
+/*
+ * davinci_spi_irq - probe function for SPI Master Controller
+ * @irq: IRQ number for this SPI Master
+ * @context_data: structure for SPI Master controller davinci_spi
+ *
+ * ISR will determine that interrupt arrives either for READ or WRITE command.
+ * According to command it will do the appropriate action. It will check
+ * transfer length and if it is not zero then dispatch transfer command again.
+ * If transfer length is zero then it will indicate the COMPLETION so that
+ * davinci_spi_bufs function can go ahead.
+ */
+static irqreturn_t davinci_spi_irq(s32 irq, void *context_data)
+{
+ struct davinci_spi *davinci_spi = context_data;
+ u32 int_status, rx_data = 0;
+ irqreturn_t ret = IRQ_NONE;
+
+ int_status = ioread32(davinci_spi->base + SPIFLG);
+ while ((int_status & DAVINCI_SPIFLG_MASK) != 0) {
+ ret = IRQ_HANDLED;
+
+ if (likely(int_status & DAVINCI_SPIFLG_RX_INTR_MASK)) {
+ rx_data = ioread32(davinci_spi->base + SPIBUF);
+ davinci_spi->get_rx(rx_data, davinci_spi);
+
+ /* Disable Receive Interrupt */
+ iowrite32(~DAVINCI_SPIINT_RX_INTR,
+ davinci_spi->base + SPIINT);
+ } else
+ (void)davinci_spi_check_error(davinci_spi, int_status);
+
+ int_status = ioread32(davinci_spi->base + SPIFLG);
+ }
+
+ return ret;
+}
+
+/*
+ * davinci_spi_probe - probe function for SPI Master Controller
+ * @pdev: platform_device structure which contains plateform specific data
+ *
+ * According to Linux Device Model this function will be invoked by Linux
+ * with plateform_device struct which contains the device specific info.
+ * This function will map the SPI controller's memory, register IRQ,
+ * Reset SPI controller and setting its registers to default value.
+ * It will invoke spi_bitbang_start to create work queue so that client driver
+ * can register transfer method to work queue.
+ */
+static int davinci_spi_probe(struct platform_device *pdev)
+{
+ struct spi_master *master;
+ struct davinci_spi *davinci_spi;
+ struct davinci_spi_platform_data *pdata;
+ struct resource *r, *mem;
+ int i = 0, ret = 0;
+
+ pdata = pdev->dev.platform_data;
+ if (pdata == NULL) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ master = spi_alloc_master(&pdev->dev, sizeof(struct davinci_spi));
+ if (master == NULL) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ dev_set_drvdata(&pdev->dev, master);
+ sdev = &pdev->dev;
+
+ davinci_spi = spi_master_get_devdata(master);
+ if (davinci_spi == NULL) {
+ ret = -ENOENT;
+ goto free_master;
+ }
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ ret = -ENOENT;
+ goto free_master;
+ }
+
+ davinci_spi->pbase = r->start;
+ davinci_spi->region_size = resource_size(r);
+ davinci_spi->pdata = pdata;
+
+ /* initialize any gpio lines used as chip select */
+ if (pdata->chip_sel != NULL) {
+ for (i = 0; i < pdata->num_chipselect; i++) {
+ if (pdata->chip_sel[i] != DAVINCI_SPI_INTERN_CS) {
+ gpio_request(pdata->chip_sel[i], "spi");
+ gpio_direction_output(pdata->chip_sel[i], 1);
+ }
+ }
+ }
+
+ mem = request_mem_region(r->start, davinci_spi->region_size,
+ pdev->name);
+ if (mem == NULL) {
+ ret = -EBUSY;
+ goto free_master;
+ }
+
+ davinci_spi->base = (struct davinci_spi_reg __iomem *)
+ ioremap(r->start, davinci_spi->region_size);
+ if (davinci_spi->base == NULL) {
+ ret = -ENOMEM;
+ goto release_region;
+ }
+
+ davinci_spi->irq = platform_get_irq(pdev, 0);
+ if (davinci_spi->irq <= 0) {
+ ret = -EINVAL;
+ goto unmap_io;
+ }
+
+ ret = request_irq(davinci_spi->irq, davinci_spi_irq, IRQF_DISABLED,
+ dev_name(&pdev->dev), davinci_spi);
+ if (ret != 0) {
+ ret = -EAGAIN;
+ goto unmap_io;
+ }
+
+ davinci_spi->bitbang.master = spi_master_get(master);
+ if (davinci_spi->bitbang.master == NULL) {
+ ret = -ENODEV;
+ goto err1;
+ }
+
+ davinci_spi->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(davinci_spi->clk)) {
+ ret = -ENODEV;
+ goto put_master;
+ }
+ clk_enable(davinci_spi->clk);
+
+
+ master->bus_num = pdev->id;
+ master->num_chipselect = pdata->num_chipselect;
+ master->setup = davinci_spi_setup;
+
+ davinci_spi->bitbang.chipselect = davinci_spi_chipselect;
+ davinci_spi->bitbang.setup_transfer = davinci_spi_setup_transfer;
+ davinci_spi->bitbang.txrx_bufs = davinci_spi_bufs_pio;
+
+ davinci_spi->bitbang.flags = SPI_LSB_FIRST | SPI_LOOP;
+ if (davinci_spi->version == DAVINCI_SPI_VERSION_2)
+ davinci_spi->bitbang.flags |= SPI_NO_CS | SPI_READY;
+
+ davinci_spi->version = pdata->version;
+ davinci_spi->get_rx = davinci_spi_rx_buf_u8;
+ davinci_spi->get_tx = davinci_spi_tx_buf_u8;
+
+ init_completion(&davinci_spi->done);
+
+ /* Reset In/OUT SPI modle */
+ iowrite32(0, davinci_spi->base + SPIGCR0);
+ udelay(100);
+ iowrite32(1, davinci_spi->base + SPIGCR0);
+
+ ret = spi_bitbang_start(&davinci_spi->bitbang);
+ if (ret != 0)
+ goto free_clk;
+
+ dev_info(&pdev->dev, "Controller at 0x%p (irq = %d) \n",
+ davinci_spi->base, davinci_spi->irq);
+
+ return ret;
+
+free_clk:
+ clk_disable(davinci_spi->clk);
+ clk_put(davinci_spi->clk);
+put_master:
+ spi_master_put(master);
+err1:
+ free_irq(davinci_spi->irq, davinci_spi);
+unmap_io:
+ iounmap(davinci_spi->base);
+release_region:
+ release_mem_region(davinci_spi->pbase, davinci_spi->region_size);
+free_master:
+ kfree(master);
+err:
+ return ret;
+}
+
+/*
+ * davinci_spi_remove - remove function for SPI Master Controller
+ * @pdev: platform_device structure which contains plateform specific data
+ *
+ * This function will do the reverse action of davinci_spi_probe function
+ * It will free the IRQ and SPI controller's memory region.
+ * It will also call spi_bitbang_stop to destroy the work queue which was
+ * created by spi_bitbang_start.
+ */
+static int __exit davinci_spi_remove(struct platform_device *pdev)
+{
+ struct davinci_spi *davinci_spi;
+ struct spi_master *master;
+
+ master = dev_get_drvdata(&pdev->dev);
+ davinci_spi = spi_master_get_devdata(master);
+
+ spi_bitbang_stop(&davinci_spi->bitbang);
+
+ clk_disable(davinci_spi->clk);
+ clk_put(davinci_spi->clk);
+ spi_master_put(master);
+ free_irq(davinci_spi->irq, davinci_spi);
+ iounmap(davinci_spi->base);
+ release_mem_region(davinci_spi->pbase, davinci_spi->region_size);
+
+ return 0;
+}
+
+static struct platform_driver davinci_spi_driver = {
+ .driver.name = "spi_davinci",
+ .remove = __exit_p(davinci_spi_remove),
+};
+
+static int __init davinci_spi_init(void)
+{
+ return platform_driver_probe(&davinci_spi_driver, davinci_spi_probe);
+}
+
+static void __exit davinci_spi_exit(void)
+{
+ platform_driver_unregister(&davinci_spi_driver);
+}
+
+module_init(davinci_spi_init);
+module_exit(davinci_spi_exit);
+
+MODULE_DESCRIPTION("TI DaVinci SPI Master Controller Driver");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __DAVINCI_SPI_H
+#define __DAVINCI_SPI_H
+
+#define DAVINCI_SPI_MAX_CHIPSELECT 2
+
+#define CS_DEFAULT 0xFF
+#define SCS0_SELECT 0x01
+#define SCS1_SELECT 0x02
+#define SCS2_SELECT 0x04
+#define SCS3_SELECT 0x08
+#define SCS4_SELECT 0x10
+#define SCS5_SELECT 0x20
+#define SCS6_SELECT 0x40
+#define SCS7_SELECT 0x80
+
+#define DAVINCI_SPIFMT_PHASE_MASK BIT(16)
+#define DAVINCI_SPIFMT_POLARITY_MASK BIT(17)
+#define DAVINCI_SPIFMT_DISTIMER_MASK BIT(18)
+#define DAVINCI_SPIFMT_SHIFTDIR_MASK BIT(20)
+#define DAVINCI_SPIFMT_WAITENA_MASK BIT(21)
+#define DAVINCI_SPIFMT_PARITYENA_MASK BIT(22)
+#define DAVINCI_SPIFMT_ODD_PARITY_MASK BIT(23)
+#define DAVINCI_SPIFMT_WDELAY_MASK 0x3f000000u
+#define DAVINCI_SPIFMT_WDELAY_SHIFT 24
+#define DAVINCI_SPIFMT_CHARLEN_MASK 0x0000001Fu
+
+/* SPIGCR1 */
+#define DAVINCI_SPIGCR1_SPIENA_MASK 0x01000000u
+
+/* SPIPC0 */
+#define DAVINCI_SPIPC0_DIFUN_MASK BIT(11) /* MISO */
+#define DAVINCI_SPIPC0_DOFUN_MASK BIT(10) /* MOSI */
+#define DAVINCI_SPIPC0_CLKFUN_MASK BIT(9) /* CLK */
+#define DAVINCI_SPIPC0_SPIENA_MASK BIT(8) /* nREADY */
+#define DAVINCI_SPIPC0_EN1FUN_MASK BIT(1)
+#define DAVINCI_SPIPC0_EN0FUN_MASK BIT(0)
+
+#define DAVINCI_SPIINT_MASKALL 0x0101035F
+#define DAVINCI_SPI_INTLVL_1 0x000001FFu
+#define DAVINCI_SPI_INTLVL_0 0x00000000u
+
+/* SPIDAT1 */
+#define DAVINCI_SPIDAT1_CSHOLD_MASK BIT(28)
+#define DAVINCI_SPIDAT1_CSHOLD_SHIFT 28
+#define DAVINCI_SPIDAT1_CSNR_MASK (BIT(17 | BIT(16))
+#define DAVINCI_SPIDAT1_CSNR_SHIFT 16
+#define DAVINCI_SPIDAT1_DFSEL_MASK (BIT(24 | BIT(25))
+#define DAVINCI_SPIGCR1_CLKMOD_MASK BIT(1)
+#define DAVINCI_SPIGCR1_MASTER_MASK BIT(0)
+#define DAVINCI_SPIGCR1_LOOPBACK_MASK BIT(16)
+
+/* SPIBUF */
+#define DAVINCI_SPIBUF_TXFULL_MASK BIT(29)
+#define DAVINCI_SPIBUF_RXEMPTY_MASK BIT(31)
+
+/* Error Masks */
+#define DAVINCI_SPIFLG_DLEN_ERR_MASK BIT(0)
+#define DAVINCI_SPIFLG_TIMEOUT_MASK BIT(1)
+#define DAVINCI_SPIFLG_PARERR_MASK BIT(2)
+#define DAVINCI_SPIFLG_DESYNC_MASK BIT(3)
+#define DAVINCI_SPIFLG_BITERR_MASK BIT(4)
+#define DAVINCI_SPIFLG_OVRRUN_MASK BIT(6)
+#define DAVINCI_SPIFLG_RX_INTR_MASK BIT(8)
+#define DAVINCI_SPIFLG_TX_INTR_MASK BIT(9)
+#define DAVINCI_SPIFLG_BUF_INIT_ACTIVE_MASK BIT(24)
+#define DAVINCI_SPIFLG_MASK (DAVINCI_SPIFLG_DLEN_ERR_MASK \
+ | DAVINCI_SPIFLG_TIMEOUT_MASK | DAVINCI_SPIFLG_PARERR_MASK \
+ | DAVINCI_SPIFLG_DESYNC_MASK | DAVINCI_SPIFLG_BITERR_MASK \
+ | DAVINCI_SPIFLG_OVRRUN_MASK | DAVINCI_SPIFLG_RX_INTR_MASK \
+ | DAVINCI_SPIFLG_TX_INTR_MASK \
+ | DAVINCI_SPIFLG_BUF_INIT_ACTIVE_MASK)
+
+#define DAVINCI_SPIINT_DLEN_ERR_INTR BIT(0)
+#define DAVINCI_SPIINT_TIMEOUT_INTR BIT(1)
+#define DAVINCI_SPIINT_PARERR_INTR BIT(2)
+#define DAVINCI_SPIINT_DESYNC_INTR BIT(3)
+#define DAVINCI_SPIINT_BITERR_INTR BIT(4)
+#define DAVINCI_SPIINT_OVRRUN_INTR BIT(6)
+#define DAVINCI_SPIINT_RX_INTR BIT(8)
+#define DAVINCI_SPIINT_TX_INTR BIT(9)
+#define DAVINCI_SPIINT_DMA_REQ_EN BIT(16)
+#define DAVINCI_SPIINT_ENABLE_HIGHZ BIT(24)
+
+#define DAVINCI_SPI_T2CDELAY_SHIFT 16
+#define DAVINCI_SPI_C2TDELAY_SHIFT 24
+
+/* SPI Controller registers */
+#define SPIGCR0 0x00
+#define SPIGCR1 0x04
+#define SPIINT 0x08
+#define SPILVL 0x0c
+#define SPIFLG 0x10
+#define SPIPC0 0x14
+#define SPIPC1 0x18
+#define SPIPC2 0x1c
+#define SPIPC3 0x20
+#define SPIPC4 0x24
+#define SPIPC5 0x28
+#define SPIPC6 0x2c
+#define SPIPC7 0x30
+#define SPIPC8 0x34
+#define SPIDAT0 0x38
+#define SPIDAT1 0x3c
+#define SPIBUF 0x40
+#define SPIEMU 0x44
+#define SPIDELAY 0x48
+#define SPIDEF 0x4c
+#define SPIFMT0 0x50
+#define SPIFMT1 0x54
+#define SPIFMT2 0x58
+#define SPIFMT3 0x5c
+#define TGINTVEC0 0x60
+#define TGINTVEC1 0x64
+
+struct davinci_spi_slave {
+ u32 cmd_to_write;
+ u32 clk_ctrl_to_write;
+ u32 bytes_per_word;
+ u8 active_cs;
+};
+
+/* SPI Controller driver's private data. */
+struct davinci_spi {
+ struct spi_bitbang bitbang;
+ struct clk *clk;
+
+ u8 version;
+ resource_size_t pbase;
+ void __iomem *base;
+ size_t region_size;
+ u32 irq;
+ struct completion done;
+
+ const void *tx;
+ void *rx;
+ int count;
+ struct davinci_spi_platform_data *pdata;
+
+ void (*get_rx)(u32 rx_data, struct davinci_spi *);
+ u32 (*get_tx)(struct davinci_spi *);
+
+ struct davinci_spi_slave slave[DAVINCI_SPI_MAX_CHIPSELECT];
+};
+
+#endif /* __DAVINCI_SPI_H */