diff mbox

[11/24] davinci: Adding DM365 EVM board support

Message ID 1247868758-10423-12-git-send-email-khilman@deeprootsystems.com (mailing list archive)
State Awaiting Upstream
Headers show

Commit Message

Kevin Hilman July 17, 2009, 10:12 p.m. UTC 
From: Sandeep Paulraj <s-paulraj@ti.com>

The patch adds support for Evaluation Module (EVM) board for the dm365
SoC.

Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
---
 arch/arm/mach-davinci/board-dm365-evm.c |   76 +++++++++++++++++++++++++++++++
 1 files changed, 76 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-davinci/board-dm365-evm.c
diff mbox

Patch

diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
new file mode 100644
index 0000000..08c2f12
--- /dev/null
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -0,0 +1,76 @@ 
+/*
+ * TI DaVinci DM365 EVM board support
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/dm365.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <linux/i2c.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 400	/* kHz */,
+	.bus_delay	= 0	/* usec */,
+};
+
+static void __init evm_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+}
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init dm365_evm_map_io(void)
+{
+	dm365_init();
+}
+
+static __init void dm365_evm_init(void)
+{
+	evm_init_i2c();
+	davinci_serial_init(&uart_config);
+}
+
+static __init void dm365_evm_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (0x80000100),
+	.map_io		= dm365_evm_map_io,
+	.init_irq	= dm365_evm_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine	= dm365_evm_init,
+MACHINE_END
+