@@ -1184,7 +1184,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
.cpu_clks = da830_clks,
.psc_bases = da830_psc_bases,
.psc_bases_num = ARRAY_SIZE(da830_psc_bases),
- .pinmux_base = IO_ADDRESS(DA8XX_SYSCFG_BASE + 0x120),
.pinmux_pins = da830_pins,
.pinmux_pins_num = ARRAY_SIZE(da830_pins),
.intc_base = (void __iomem *)DA8XX_CP_INTC_VIRT,
@@ -1201,5 +1200,11 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
void __init da830_init(void)
{
+ da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K);
+ if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module"))
+ return;
+
+ davinci_soc_info_da830.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
+
davinci_common_init(&davinci_soc_info_da830);
}
@@ -799,7 +799,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
.cpu_clks = da850_clks,
.psc_bases = da850_psc_bases,
.psc_bases_num = ARRAY_SIZE(da850_psc_bases),
- .pinmux_base = IO_ADDRESS(DA8XX_SYSCFG_BASE + 0x120),
.pinmux_pins = da850_pins,
.pinmux_pins_num = ARRAY_SIZE(da850_pins),
.intc_base = (void __iomem *)DA8XX_CP_INTC_VIRT,
@@ -816,5 +815,11 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
void __init da850_init(void)
{
+ da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K);
+ if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module"))
+ return;
+
+ davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
+
davinci_common_init(&davinci_soc_info_da850);
}
@@ -43,6 +43,8 @@
#define DA8XX_MDIO_REG_OFFSET 0x4000
#define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K
+void __iomem *da8xx_syscfg_base;
+
static struct plat_serial8250_port da8xx_serial_pdata[] = {
{
.mapbase = DA8XX_UART0_BASE,
@@ -18,6 +18,8 @@
#include <mach/asp.h>
#include <mach/mmc.h>
+extern void __iomem *da8xx_syscfg_base;
+
/*
* The cp_intc interrupt controller for the da8xx isn't in the same
* chunk of physical memory space as the other registers (like it is
@@ -30,6 +32,7 @@
#define DA8XX_CP_INTC_VIRT (IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
#define DA8XX_SYSCFG_BASE (IO_PHYS + 0x14000)
+#define DA8XX_SYSCFG_VIRT(x) (da8xx_syscfg_base + (x))
#define DA8XX_PSC0_BASE 0x01c10000
#define DA8XX_PLL0_BASE 0x01c11000
Avoid use of IO_ADDRESS() for SYSCFG module by doing an ioremap() instead. Signed-off-by: Sekhar Nori <nsekhar@ti.com> --- arch/arm/mach-davinci/da830.c | 7 ++++++- arch/arm/mach-davinci/da850.c | 7 ++++++- arch/arm/mach-davinci/devices-da8xx.c | 2 ++ arch/arm/mach-davinci/include/mach/da8xx.h | 3 +++ 4 files changed, 17 insertions(+), 2 deletions(-)