@@ -23,6 +23,7 @@
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -251,6 +252,153 @@ static void __init da850_evm_init_nor(void)
iounmap(aemif_addr);
}
+/* TPS65070 voltage regulator support */
+
+/* 3.3V */
+struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
+ {
+ .supply = "usb0_vdda33",
+ },
+ {
+ .supply = "usb1_vdda33",
+ },
+};
+
+/* 3.3V or 1.8V */
+struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
+ {
+ .supply = "dvdd3318_a",
+ },
+ {
+ .supply = "dvdd3318_b",
+ },
+ {
+ .supply = "dvdd3318_c",
+ },
+};
+
+/* 1.2V */
+struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
+ {
+ .supply = "cvdd",
+ },
+};
+
+/* 1.8V LDO */
+struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
+ {
+ .supply = "sata_vddr",
+ },
+ {
+ .supply = "usb0_vdda18",
+ },
+ {
+ .supply = "usb1_vdda18",
+ },
+ {
+ .supply = "ddr_dvdd18",
+ },
+};
+
+/* 1.2V LDO */
+struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
+ {
+ .supply = "sata_vdd",
+ },
+ {
+ .supply = "pll0_vdda",
+ },
+ {
+ .supply = "pll1_vdda",
+ },
+ {
+ .supply = "usbs_cvdd",
+ },
+ {
+ .supply = "vddarnwa1",
+ },
+};
+
+struct regulator_init_data tps65070_regulator_data[] = {
+ /* dcdc1 */
+ {
+ .constraints = {
+ .min_uV = 3150000,
+ .max_uV = 3450000,
+ .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS),
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers),
+ .consumer_supplies = tps65070_dcdc1_consumers,
+ },
+
+ /* dcdc2 */
+ {
+ .constraints = {
+ .min_uV = 1710000,
+ .max_uV = 3450000,
+ .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS),
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
+ .consumer_supplies = tps65070_dcdc2_consumers,
+ },
+
+ /* dcdc3 */
+ {
+ .constraints = {
+ .min_uV = 950000,
+ .max_uV = 1320000,
+ .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS),
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
+ .consumer_supplies = tps65070_dcdc3_consumers,
+ },
+
+ /* ldo1 */
+ {
+ .constraints = {
+ .min_uV = 1710000,
+ .max_uV = 1890000,
+ .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS),
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers),
+ .consumer_supplies = tps65070_ldo1_consumers,
+ },
+
+ /* ldo2 */
+ {
+ .constraints = {
+ .min_uV = 1140000,
+ .max_uV = 1320000,
+ .valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS),
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers),
+ .consumer_supplies = tps65070_ldo2_consumers,
+ },
+};
+
+static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
+ {
+ I2C_BOARD_INFO("tps6507x", 0x48),
+ .platform_data = &tps65070_regulator_data[0],
+ },
+};
+
+static int __init pmic_tps65070_init(void)
+{
+ return i2c_register_board_info(1, da850evm_tps65070_info,
+ ARRAY_SIZE(da850evm_tps65070_info));
+}
+
#if defined(CONFIG_MTD_PHYSMAP) || \
defined(CONFIG_MTD_PHYSMAP_MODULE)
#define HAS_NOR 1
@@ -275,6 +423,11 @@ static __init void da850_evm_init(void)
struct davinci_soc_info *soc_info = &davinci_soc_info;
int ret;
+ ret = pmic_tps65070_init();
+ if (ret)
+ pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n",
+ ret);
+
ret = da8xx_pinmux_setup(da850_nand_pins);
if (ret)
pr_warning("da850_evm_init: nand mux setup failed: %d\n",