@@ -125,12 +125,21 @@ static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int reg)
return __raw_readw(i2c_dev->base + reg);
}
-/*
- * This functions configures I2C and brings I2C out of reset.
- * This function is called during I2C init function. This function
- * also gets called if I2C encounters any errors.
- */
-static int i2c_davinci_init(struct davinci_i2c_dev *dev)
+static inline void davinci_i2c_reset_ctrl(struct davinci_i2c_dev *i2c_dev,
+ int val)
+{
+ u16 w;
+
+ w = davinci_i2c_read_reg(i2c_dev, DAVINCI_I2C_MDR_REG);
+ if (!val) /* put I2C into reset */
+ w &= ~DAVINCI_I2C_MDR_IRS;
+ else /* take I2C out of reset */
+ w |= DAVINCI_I2C_MDR_IRS;
+
+ davinci_i2c_write_reg(i2c_dev, DAVINCI_I2C_MDR_REG, w);
+}
+
+static void i2c_davinci_calc_clk_dividers(struct davinci_i2c_dev *dev)
{
struct davinci_i2c_platform_data *pdata = dev->dev->platform_data;
u16 psc;
@@ -139,15 +148,6 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
u32 clkh;
u32 clkl;
u32 input_clock = clk_get_rate(dev->clk);
- u16 w;
-
- if (!pdata)
- pdata = &davinci_i2c_platform_data_default;
-
- /* put I2C into reset */
- w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
- w &= ~DAVINCI_I2C_MDR_IRS;
- davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
/* NOTE: I2C Clock divider programming info
* As per I2C specs the following formulas provide prescaler
@@ -179,12 +179,32 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKH_REG, clkh);
davinci_i2c_write_reg(dev, DAVINCI_I2C_CLKL_REG, clkl);
+ dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk);
+}
+
+/*
+ * This function configures I2C and brings I2C out of reset.
+ * This function is called during I2C init function. This function
+ * also gets called if I2C encounters any errors.
+ */
+static int i2c_davinci_init(struct davinci_i2c_dev *dev)
+{
+ struct davinci_i2c_platform_data *pdata = dev->dev->platform_data;
+
+ if (!pdata)
+ pdata = &davinci_i2c_platform_data_default;
+
+ /* put I2C into reset */
+ davinci_i2c_reset_ctrl(dev, 0);
+
+ /* compute clock dividers */
+ i2c_davinci_calc_clk_dividers(dev);
+
/* Respond at reserved "SMBus Host" slave address" (and zero);
* we seem to have no option to not respond...
*/
davinci_i2c_write_reg(dev, DAVINCI_I2C_OAR_REG, 0x08);
- dev_dbg(dev->dev, "input_clock = %d, CLK = %d\n", input_clock, clk);
dev_dbg(dev->dev, "PSC = %d\n",
davinci_i2c_read_reg(dev, DAVINCI_I2C_PSC_REG));
dev_dbg(dev->dev, "CLKL = %d\n",
@@ -195,9 +215,7 @@ static int i2c_davinci_init(struct davinci_i2c_dev *dev)
pdata->bus_freq, pdata->bus_delay);
/* Take the I2C module out of reset: */
- w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
- w |= DAVINCI_I2C_MDR_IRS;
- davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
+ davinci_i2c_reset_ctrl(dev, 1);
/* Enable interrupts */
davinci_i2c_write_reg(dev, DAVINCI_I2C_IMR_REG, I2C_DAVINCI_INTR_ALL);