[v4,05/10] davinci: cleanup mdio arch code and switch to phy_id

Message ID	1284498612-25294-6-git-send-email-cyril@ti.com (mailing list archive)
State	Superseded
Headers	show Received: from devils.ext.ti.com (devils.ext.ti.com [198.47.26.153]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id o8ELEOam020773 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=OK) for <patchwork-davinci@patchwork.kernel.org>; Tue, 14 Sep 2010 21:14:45 GMT From: Cyril Chemparathy <cyril@ti.com> To: netdev@vger.kernel.org, davinci-linux-open-source@linux.davincidsp.com, linux-omap@vger.kernel.org Subject: [PATCH v4 05/10] davinci: cleanup mdio arch code and switch to phy_id Date: Tue, 14 Sep 2010 17:10:07 -0400 Message-Id: <1284498612-25294-6-git-send-email-cyril@ti.com> In-Reply-To: <1284498612-25294-1-git-send-email-cyril@ti.com> References: <1284498612-25294-1-git-send-email-cyril@ti.com> Precedence: list MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: davinci-linux-open-source-bounces@linux.davincidsp.com Errors-To: davinci-linux-open-source-bounces@linux.davincidsp.com

diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index ef1ab0b..1bb89d3 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -31,9 +31,7 @@ #include <mach/usb.h> #include <mach/aemif.h> -#define DA830_EVM_PHY_MASK 0x0 -#define DA830_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ - +#define DA830_EVM_PHY_ID "" /* * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4]. */ @@ -558,9 +556,8 @@ static __init void da830_evm_init(void) da830_evm_usb_init(); - soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY; soc_info->emac_pdata->rmii_en = 1; + soc_info->emac_pdata->phy_id = DA830_EVM_PHY_ID; ret = davinci_cfg_reg_list(da830_cpgmac_pins); if (ret) diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index ac2297c..5e435b0 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -38,9 +38,7 @@ #include <mach/mux.h> #include <mach/aemif.h> -#define DA850_EVM_PHY_MASK 0x1 -#define DA850_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ - +#define DA850_EVM_PHY_ID "0:00" #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15) @@ -678,8 +676,7 @@ static int __init da850_evm_config_emac(void) /* Enable/Disable MII MDIO clock */ gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en); - soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY; + soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID; ret = da8xx_register_emac(); if (ret) diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index bdea2da..a06b84c 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -54,9 +54,7 @@ static inline int have_tvp7002(void) return 0; } -#define DM365_EVM_PHY_MASK (0x2) -#define DM365_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ - +#define DM365_EVM_PHY_ID "0:01" /* * A MAX-II CPLD is used for various board control functions. */ @@ -535,8 +533,7 @@ fail: /* ... and ENET ... */ dm365evm_emac_configure(); - soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY; + soc_info->emac_pdata->phy_id = DM365_EVM_PHY_ID; resets &= ~BIT(3); /* ... and AIC33 */ diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 65bb940..44a2f0a 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -39,9 +39,7 @@ #include <mach/usb.h> #include <mach/aemif.h> -#define DM644X_EVM_PHY_MASK (0x2) -#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ - +#define DM644X_EVM_PHY_ID "0:01" #define LXT971_PHY_ID (0x001378e2) #define LXT971_PHY_MASK (0xfffffff0) @@ -707,9 +705,7 @@ static __init void davinci_evm_init(void) davinci_serial_init(&uart_config); dm644x_init_asp(&dm644x_evm_snd_data); - soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY; - + soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID; /* Register the fixup for PHY on DaVinci */ phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK, davinci_phy_fixup); diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 5a29955..67669bb 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -729,9 +729,7 @@ static struct davinci_uart_config uart_config __initdata = { .enabled_uarts = (1 << 0), }; -#define DM646X_EVM_PHY_MASK (0x2) -#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ - +#define DM646X_EVM_PHY_ID "0:01" /* * The following EDMA channels/slots are not being used by drivers (for * example: Timer, GPIO, UART events etc) on dm646x, hence they are being @@ -784,8 +782,7 @@ static __init void evm_init(void) if (HAS_ATA) davinci_init_ide(); - soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY; + soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID; } #define DM646X_EVM_REF_FREQ 27000000 diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 84d5aff..6f12a18 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -24,9 +24,7 @@ #include <mach/nand.h> #include <mach/mux.h> -#define MITYOMAPL138_PHY_MASK 0x08 /* hardcoded for now */ -#define MITYOMAPL138_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ - +#define MITYOMAPL138_PHY_ID "0:03" static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = { .bus_freq = 100, /* kHz */ .bus_delay = 0, /* usec */ @@ -273,9 +271,7 @@ static void __init mityomapl138_config_emac(void) /* configure the CFGCHIP3 register for RMII or MII */ __raw_writel(val, cfg_chip3_base); - soc_info->emac_pdata->phy_mask = MITYOMAPL138_PHY_MASK; - pr_debug("setting phy_mask to %x\n", soc_info->emac_pdata->phy_mask); - soc_info->emac_pdata->mdio_max_freq = MITYOMAPL138_MDIO_FREQUENCY; + soc_info->emac_pdata->phy_id = MITYOMAPL138_PHY_ID; ret = da8xx_register_emac(); if (ret) diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 4c30e92..04a8d16 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -39,9 +39,7 @@ #include <mach/mmc.h> #include <mach/usb.h> -#define NEUROS_OSD2_PHY_MASK 0x2 -#define NEUROS_OSD2_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ - +#define NEUROS_OSD2_PHY_ID "0:01" #define LXT971_PHY_ID 0x001378e2 #define LXT971_PHY_MASK 0xfffffff0 @@ -252,8 +250,7 @@ static __init void davinci_ntosd2_init(void) davinci_serial_init(&uart_config); dm644x_init_asp(&dm644x_ntosd2_snd_data); - soc_info->emac_pdata->phy_mask = NEUROS_OSD2_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = NEUROS_OSD2_MDIO_FREQUENCY; + soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID; davinci_setup_usb(1000, 8); /* diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 23e664a..ab4292d 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -42,9 +42,7 @@ #include <mach/mux.h> #include <mach/usb.h> -#define SFFSDR_PHY_MASK (0x2) -#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */ - +#define SFFSDR_PHY_ID "0:01" static struct mtd_partition davinci_sffsdr_nandflash_partition[] = { /* U-Boot Environment: Block 0 * UBL: Block 1 @@ -143,8 +141,7 @@ static __init void davinci_sffsdr_init(void) ARRAY_SIZE(davinci_sffsdr_devices)); sffsdr_init_i2c(); davinci_serial_init(&uart_config); - soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK; - soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY; + soc_info->emac_pdata->phy_id = SFFSDR_PHY_ID; davinci_setup_usb(0, 0); /* We support only peripheral mode. */ /* mux VLYNQ pins */ diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 9039221..9eec630 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -42,7 +42,6 @@ #define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000 #define DA8XX_EMAC_MOD_REG_OFFSET 0x2000 #define DA8XX_EMAC_RAM_OFFSET 0x0000 -#define DA8XX_MDIO_REG_OFFSET 0x4000 #define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K void __iomem *da8xx_syscfg0_base; @@ -381,7 +380,6 @@ struct emac_platform_data da8xx_emac_pdata = { .ctrl_reg_offset = DA8XX_EMAC_CTRL_REG_OFFSET, .ctrl_mod_reg_offset = DA8XX_EMAC_MOD_REG_OFFSET, .ctrl_ram_offset = DA8XX_EMAC_RAM_OFFSET, - .mdio_reg_offset = DA8XX_MDIO_REG_OFFSET, .ctrl_ram_size = DA8XX_EMAC_CTRL_RAM_SIZE, .version = EMAC_VERSION_2, }; diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 71f0f9d..240f392 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -691,7 +691,6 @@ static struct emac_platform_data dm365_emac_pdata = { .ctrl_reg_offset = DM365_EMAC_CNTRL_OFFSET, .ctrl_mod_reg_offset = DM365_EMAC_CNTRL_MOD_OFFSET, .ctrl_ram_offset = DM365_EMAC_CNTRL_RAM_OFFSET, - .mdio_reg_offset = DM365_EMAC_MDIO_OFFSET, .ctrl_ram_size = DM365_EMAC_CNTRL_RAM_SIZE, .version = EMAC_VERSION_2, }; diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index c103b2c..41b7a95 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -322,7 +322,6 @@ static struct emac_platform_data dm644x_emac_pdata = { .ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET, .ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET, .ctrl_ram_offset = DM644X_EMAC_CNTRL_RAM_OFFSET, - .mdio_reg_offset = DM644X_EMAC_MDIO_OFFSET, .ctrl_ram_size = DM644X_EMAC_CNTRL_RAM_SIZE, .version = EMAC_VERSION_1, }; diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 8da886b..08db90f 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -358,7 +358,6 @@ static struct emac_platform_data dm646x_emac_pdata = { .ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET, .ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET, .ctrl_ram_offset = DM646X_EMAC_CNTRL_RAM_OFFSET, - .mdio_reg_offset = DM646X_EMAC_MDIO_OFFSET, .ctrl_ram_size = DM646X_EMAC_CNTRL_RAM_SIZE, .version = EMAC_VERSION_2, }; diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h index dbb5052..2563bf4 100644 --- a/arch/arm/mach-davinci/include/mach/dm365.h +++ b/arch/arm/mach-davinci/include/mach/dm365.h @@ -25,7 +25,6 @@ #define DM365_EMAC_CNTRL_OFFSET (0x0000) #define DM365_EMAC_CNTRL_MOD_OFFSET (0x3000) #define DM365_EMAC_CNTRL_RAM_OFFSET (0x1000) -#define DM365_EMAC_MDIO_OFFSET (0x4000) #define DM365_EMAC_CNTRL_RAM_SIZE (0x2000) /* Base of key scan register bank */ diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h index 5159117..5a1b26d 100644 --- a/arch/arm/mach-davinci/include/mach/dm644x.h +++ b/arch/arm/mach-davinci/include/mach/dm644x.h @@ -32,7 +32,6 @@ #define DM644X_EMAC_CNTRL_OFFSET (0x0000) #define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000) #define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000) -#define DM644X_EMAC_MDIO_OFFSET (0x4000) #define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000) #define DM644X_ASYNC_EMIF_CONTROL_BASE 0x01E00000 diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h index 1c4dca9..7a27f3f 100644 --- a/arch/arm/mach-davinci/include/mach/dm646x.h +++ b/arch/arm/mach-davinci/include/mach/dm646x.h @@ -23,7 +23,6 @@ #define DM646X_EMAC_CNTRL_OFFSET (0x0000) #define DM646X_EMAC_CNTRL_MOD_OFFSET (0x1000) #define DM646X_EMAC_CNTRL_RAM_OFFSET (0x2000) -#define DM646X_EMAC_MDIO_OFFSET (0x4000) #define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000) #define DM646X_ASYNC_EMIF_CONTROL_BASE 0x20008000

[v4,05/10] davinci: cleanup mdio arch code and switch to phy_id

Commit Message

Patch