@@ -13,6 +13,8 @@
#include <linux/console.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
+#include <linux/regulator/machine.h>
+#include <linux/i2c.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -25,6 +27,141 @@
#define MITYOMAPL138_PHY_MASK 0x08 /* hardcoded for now */
#define MITYOMAPL138_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
+static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = {
+ .bus_freq = 100, /* kHz */
+ .bus_delay = 0, /* usec */
+};
+
+/* TPS65023 voltage regulator support */
+/* 1.2V Core */
+struct regulator_consumer_supply tps65023_dcdc1_consumers[] = {
+ {
+ .supply = "cvdd",
+ },
+};
+
+/* 1.8V */
+struct regulator_consumer_supply tps65023_dcdc2_consumers[] = {
+ {
+ .supply = "usb0_vdda18",
+ },
+ {
+ .supply = "usb1_vdda18",
+ },
+ {
+ .supply = "ddr_dvdd18",
+ },
+ {
+ .supply = "sata_vddr",
+ },
+};
+
+/* 1.2V */
+struct regulator_consumer_supply tps65023_dcdc3_consumers[] = {
+ {
+ .supply = "sata_vdd",
+ },
+ {
+ .supply = "usb_cvdd",
+ },
+ {
+ .supply = "pll0_vdda",
+ },
+ {
+ .supply = "pll1_vdda",
+ },
+};
+
+/* 1.8V Aux LDO, not used */
+struct regulator_consumer_supply tps65023_ldo1_consumers[] = {
+ {
+ .supply = "1.8v_aux",
+ },
+};
+
+/* FPGA VCC Aux (2.5 or 3.3) LDO */
+struct regulator_consumer_supply tps65023_ldo2_consumers[] = {
+ {
+ .supply = "vccaux",
+ },
+};
+
+struct regulator_init_data tps65023_regulator_data[] = {
+ /* dcdc1 */
+ {
+ .constraints = {
+ .min_uV = 1150000,
+ .max_uV = 1350000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc1_consumers),
+ .consumer_supplies = tps65023_dcdc1_consumers,
+ },
+ /* dcdc2 */
+ {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc2_consumers),
+ .consumer_supplies = tps65023_dcdc2_consumers,
+ },
+ /* dcdc3 */
+ {
+ .constraints = {
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65023_dcdc3_consumers),
+ .consumer_supplies = tps65023_dcdc3_consumers,
+ },
+ /* ldo1 */
+ {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65023_ldo1_consumers),
+ .consumer_supplies = tps65023_ldo1_consumers,
+ },
+ /* ldo2 */
+ {
+ .constraints = {
+ .min_uV = 2500000,
+ .max_uV = 3300000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS,
+ .boot_on = 1,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(tps65023_ldo2_consumers),
+ .consumer_supplies = tps65023_ldo2_consumers,
+ },
+};
+
+static struct i2c_board_info __initdata mityomap_tps65023_info[] = {
+ {
+ I2C_BOARD_INFO("tps65023", 0x48),
+ .platform_data = &tps65023_regulator_data[0],
+ },
+ {
+ I2C_BOARD_INFO("24c02", 0x50),
+ },
+};
+
+static int __init pmic_tps65023_init(void)
+{
+ return i2c_register_board_info(1, mityomap_tps65023_info,
+ ARRAY_SIZE(mityomap_tps65023_info));
+}
+
/*
* MityDSP-L138 includes a 256 MByte large-page NAND flash
* (128K blocks).
@@ -172,6 +309,14 @@ static void __init mityomapl138_init(void)
davinci_serial_init(&mityomapl138_uart_config);
+ ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
+ if (ret)
+ pr_warning("i2c0 registration failed: %d\n", ret);
+
+ ret = pmic_tps65023_init();
+ if (ret)
+ pr_warning("TPS65023 PMIC init failed: %d\n", ret);
+
mityomapl138_setup_nand();
mityomapl138_config_emac();