@@ -30,13 +30,13 @@ config ARCH_DAVINCI_DM646x
select ARCH_DAVINCI_DMx
config ARCH_DAVINCI_DA830
- bool "DA830/OMAP-L137 based system"
+ bool "DA830/OMAP-L137/AM17x based system"
select CP_INTC
select ARCH_DAVINCI_DA8XX
select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
config ARCH_DAVINCI_DA850
- bool "DA850/OMAP-L138 based system"
+ bool "DA850/OMAP-L138/AM18x based system"
select CP_INTC
select ARCH_DAVINCI_DA8XX
select ARCH_HAS_CPUFREQ
@@ -115,21 +115,21 @@ config MACH_DAVINCI_DM365_EVM
for development is a DM365 EVM
config MACH_DAVINCI_DA830_EVM
- bool "TI DA830/OMAP-L137 Reference Platform"
+ bool "TI DA830/OMAP-L137/AM17x Reference Platform"
default ARCH_DAVINCI_DA830
depends on ARCH_DAVINCI_DA830
select GPIO_PCF857X
help
- Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
+ Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module.
choice
- prompt "Select DA830/OMAP-L137 UI board peripheral"
+ prompt "Select DA830/OMAP-L137/AM17x UI board peripheral"
depends on MACH_DAVINCI_DA830_EVM
help
- The presence of UI card on the DA830/OMAP-L137 EVM is detected
- automatically based on successful probe of the I2C based GPIO
- expander on that board. This option selected in this menu has
- an effect only in case of a successful UI card detection.
+ The presence of UI card on the DA830/OMAP-L137/AM17x EVM is
+ detected automatically based on successful probe of the I2C
+ based GPIO expander on that board. This option selected in this
+ menu has an effect only in case of a successful UI card detection.
config DA830_UI_LCD
bool "LCD"
@@ -145,18 +145,18 @@ config DA830_UI_NAND
endchoice
config MACH_DAVINCI_DA850_EVM
- bool "TI DA850/OMAP-L138 Reference Platform"
+ bool "TI DA850/OMAP-L138/AM18x Reference Platform"
default ARCH_DAVINCI_DA850
depends on ARCH_DAVINCI_DA850
select GPIO_PCA953X
help
- Say Y here to select the TI DA850/OMAP-L138 Evaluation Module.
+ Say Y here to select the TI DA850/OMAP-L138/AM18x Evaluation Module.
choice
prompt "Select peripherals connected to expander on UI board"
depends on MACH_DAVINCI_DA850_EVM
help
- The presence of User Interface (UI) card on the DA850/OMAP-L138
+ The presence of User Interface (UI) card on the DA850/OMAP-L138/AM18x
EVM is detected automatically based on successful probe of the I2C
based GPIO expander on that card. This option selected in this
menu has an effect only in case of a successful UI card detection.
@@ -165,13 +165,13 @@ config DA850_UI_NONE
bool "No peripheral is enabled"
help
Say Y if you do not want to enable any of the peripherals connected
- to TCA6416 expander on DA850/OMAP-L138 EVM UI card
+ to TCA6416 expander on DA850/OMAP-L138/AM18x EVM UI card
config DA850_UI_RMII
bool "RMII Ethernet PHY"
help
- Say Y if you want to use the RMII PHY on the DA850/OMAP-L138 EVM.
- This PHY is found on the UI daughter card that is supplied with
+ Say Y if you want to use the RMII PHY on the DA850/OMAP-L138/AM18x
+ EVM. This PHY is found on the UI daughter card that is supplied with
the EVM.
NOTE: Please take care while choosing this option, MII PHY will
not be functional if RMII mode is selected.
@@ -596,7 +596,7 @@ static void __init da830_evm_map_io(void)
da830_init();
}
-MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137 EVM")
+MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
.phys_io = IO_PHYS,
.io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
.boot_params = (DA8XX_DDR_BASE + 0x100),
@@ -816,7 +816,7 @@ static void __init da850_evm_map_io(void)
da850_init();
}
-MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM")
+MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
.phys_io = IO_PHYS,
.io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
.boot_params = (DA8XX_DDR_BASE + 0x100),