@@ -5,7 +5,7 @@
*
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
+ * is licensed without any warranty of any kind, whether express
* or implied.
*/
#include <linux/kernel.h>
@@ -176,18 +176,6 @@ static struct platform_device davinci_evm_nandflash_device = {
.resource = davinci_evm_nandflash_resource,
};
-static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
-
-static struct platform_device davinci_fb_device = {
- .name = "davincifb",
- .id = -1,
- .dev = {
- .dma_mask = &davinci_fb_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .num_resources = 0,
-};
-
static struct tvp514x_platform_data tvp5146_pdata = {
.clk_polarity = 0,
.hs_polarity = 1,
@@ -337,7 +325,6 @@ static struct pcf857x_platform_data pcf_data_u2 = {
.teardown = evm_led_teardown,
};
-
/* U18 - A/V clock generator and user switch */
static int sw_gpio;
@@ -404,7 +391,6 @@ static struct pcf857x_platform_data pcf_data_u18 = {
.teardown = evm_u18_teardown,
};
-
/* U35 - various I/O signals used to manage USB, CF, ATA, etc */
static int
@@ -616,8 +602,73 @@ static void __init evm_init_i2c(void)
i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
}
+#define VENC_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+
+/* venc standards timings */
+static struct vpbe_enc_mode_info vbpe_enc_std_timings[] = {
+ {"ntsc", VPBE_ENC_STD, {V4L2_STD_525_60}, 1, 720, 480,
+ {11, 10}, {30000, 1001}, 0x79, 0, 0x10, 0, 0, 0, 0},
+ {"pal", VPBE_ENC_STD, {V4L2_STD_625_50}, 1, 720, 576,
+ {54, 59}, {25, 1}, 0x7E, 0, 0x16, 0, 0, 0, 0},
+};
+
+/* venc dv preset timings */
+static struct vpbe_enc_mode_info vbpe_enc_preset_timings[] = {
+ {"480p59_94", VPBE_ENC_DV_PRESET, {V4L2_DV_480P59_94}, 0, 720, 480,
+ {1, 1}, {5994, 100}, 0x80, 0, 0x20, 0, 0, 0, 0},
+ {"576p50", VPBE_ENC_DV_PRESET, {V4L2_DV_576P50}, 0, 720, 576,
+ {1, 1}, {50, 1}, 0x7E, 0, 0x30, 0, 0, 0, 0},
+};
+
+/*
+ * The outputs available from VPBE + encoders. Keep the order same
+ * as that of encoders. First that from venc followed by that from
+ * encoders. Index in the output refers to index on a particular encoder.
+ * Driver uses this index to pass it to encoder when it supports more than
+ * one output. Application uses index of the array to set an output.
+ */
+static struct vpbe_output dm644x_vpbe_outputs[] = {
+ {
+ .output = {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .std = VENC_STD_ALL,
+ .capabilities = V4L2_OUT_CAP_STD,
+ },
+ .subdev_name = VPBE_VENC_SUBDEV_NAME,
+ .default_mode = "ntsc",
+ .num_modes = ARRAY_SIZE(vbpe_enc_std_timings),
+ .modes = vbpe_enc_std_timings,
+ },
+ {
+ .output = {
+ .index = 1,
+ .name = "Component",
+ .type = V4L2_OUTPUT_TYPE_ANALOG,
+ .capabilities = V4L2_OUT_CAP_PRESETS,
+ },
+ .subdev_name = VPBE_VENC_SUBDEV_NAME,
+ .default_mode = "480p59_94",
+ .num_modes = ARRAY_SIZE(vbpe_enc_preset_timings),
+ .modes = vbpe_enc_preset_timings,
+ },
+};
+
+static struct vpbe_display_config vpbe_display_cfg = {
+ .module_name = "dm644x-vpbe-display",
+ .i2c_adapter_id = 1,
+ .osd = {
+ .module_name = VPBE_OSD_SUBDEV_NAME,
+ },
+ .venc = {
+ .module_name = VPBE_VENC_SUBDEV_NAME,
+ },
+ .num_outputs = ARRAY_SIZE(dm644x_vpbe_outputs),
+ .outputs = dm644x_vpbe_outputs,
+};
+
static struct platform_device *davinci_evm_devices[] __initdata = {
- &davinci_fb_device,
&rtc_dev,
};
@@ -630,6 +681,9 @@ davinci_evm_map_io(void)
{
/* setup input configuration for VPFE input devices */
dm644x_set_vpfe_config(&vpfe_cfg);
+
+ /* setup configuration for vpbe devices */
+ dm644x_set_vpbe_display_config(&vpbe_display_cfg);
dm644x_init();
}