diff --git a/drivers/media/platform/davinci/vpfe_mc_capture.c b/drivers/media/platform/davinci/vpfe_mc_capture.c
new file mode 100644
index 0000000..807ed33
--- /dev/null
+++ b/drivers/media/platform/davinci/vpfe_mc_capture.c
@@ -0,0 +1,741 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * Contributors:
+ *      Manjunath Hadli <manjunath.hadli@ti.com>
+ *      Prabhakar Lad <prabhakar.lad@ti.com>
+ *
+ *
+ * Driver name : VPFE Capture driver
+ *    VPFE Capture driver allows applications to capture and stream video
+ *    frames on DaVinci SoCs (DM6446, DM355 etc) from a YUV source such as
+ *    TVP5146 or  Raw Bayer RGB image data from an image sensor
+ *    such as Microns' MT9T001, MT9T031 etc.
+ *
+ *    These SoCs have, in common, a Video Processing Subsystem (VPSS) that
+ *    consists of a Video Processing Front End (VPFE) for capturing
+ *    video/raw image data and Video Processing Back End (VPBE) for displaying
+ *    YUV data through an in-built analog encoder or Digital LCD port. This
+ *    driver is for capture through VPFE. A typical EVM using these SoCs have
+ *    following high level configuration.
+ *
+ *    decoder(TVP5146/		YUV/
+ *	MT9T001)   -->  Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF)
+ *			data input              |      |
+ *							V      |
+ *						      SDRAM    |
+ *							       V
+ *							   Image Processor
+ *							       |
+ *							       V
+ *							     SDRAM
+ *    The data flow happens from a decoder connected to the VPFE over a
+ *    YUV embedded (BT.656/BT.1120) or separate sync or raw bayer rgb interface
+ *    and to the input of VPFE through an optional MUX (if more inputs are
+ *    to be interfaced on the EVM). The input data is first passed through
+ *    CCDC (CCD Controller, a.k.a Image Sensor Interface, ISIF). The CCDC
+ *    does very little or no processing on YUV data and does pre-process Raw
+ *    Bayer RGB data through modules such as Defect Pixel Correction (DFC)
+ *    Color Space Conversion (CSC), data gain/offset etc. After this, data
+ *    can be written to SDRAM or can be connected to the image processing
+ *    block such as IPIPE (on DM355/DM365 only).
+ *
+ *    Features supported
+ *		- MMAP IO
+ *		- USERPTR IO
+ *		- Capture using TVP5146 over BT.656
+ *		- Support for interfacing decoders using sub device model
+ *		- Work with DM365 or DM355 or DM6446 CCDC to do Raw Bayer
+ *		  RGB/YUV data capture to SDRAM.
+ *		- Chaining of Image Processor
+ *		- SINGLE-SHOT mode
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include <media/davinci/vpfe.h>
+
+#include "vpfe_mc_capture.h"
+
+static bool debug;
+static bool interface;
+
+module_param(interface, bool, S_IRUGO);
+module_param(debug, bool, 0644);
+
+/**
+ * VPFE capture can be used for capturing video such as from TVP5146 or TVP7002
+ * and for capture raw bayer data from camera sensors such as mt9p031. At this
+ * point there is problem in co-existence of mt9p031 and tvp5146 due to i2c
+ * address collision. So set the variable below from bootargs to do either video
+ * capture or camera capture.
+ * interface = 0 - video capture (from TVP514x or such),
+ * interface = 1 - Camera capture (from mt9p031 or such)
+ * Re-visit this when we fix the co-existence issue
+ */
+MODULE_PARM_DESC(interface, "interface 0-1 (default:0)");
+MODULE_PARM_DESC(debug, "Debug level 0-1");
+
+MODULE_DESCRIPTION("VPFE Video for Linux Capture Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Texas Instruments");
+
+/* map mbus_fmt to pixelformat */
+void mbus_to_pix(const struct v4l2_mbus_framefmt *mbus,
+			   struct v4l2_pix_format *pix)
+{
+	switch (mbus->code) {
+	case V4L2_MBUS_FMT_UYVY8_2X8:
+		pix->pixelformat = V4L2_PIX_FMT_UYVY;
+		pix->bytesperline = pix->width * 2;
+		break;
+
+	case V4L2_MBUS_FMT_YUYV8_2X8:
+		pix->pixelformat = V4L2_PIX_FMT_YUYV;
+		pix->bytesperline = pix->width * 2;
+		break;
+
+	case V4L2_MBUS_FMT_YUYV10_1X20:
+		pix->pixelformat = V4L2_PIX_FMT_UYVY;
+		pix->bytesperline = pix->width * 2;
+		break;
+
+	case V4L2_MBUS_FMT_SGRBG12_1X12:
+		pix->pixelformat = V4L2_PIX_FMT_SBGGR16;
+		pix->bytesperline = pix->width * 2;
+		break;
+
+	case V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8:
+		pix->pixelformat = V4L2_PIX_FMT_SGRBG10DPCM8;
+		pix->bytesperline = pix->width;
+		break;
+
+	case V4L2_MBUS_FMT_SGRBG10_ALAW8_1X8:
+		pix->pixelformat = V4L2_PIX_FMT_SGRBG10ALAW8;
+		pix->bytesperline = pix->width;
+		break;
+
+	case V4L2_MBUS_FMT_YDYUYDYV8_1X16:
+		pix->pixelformat = V4L2_PIX_FMT_NV12;
+		pix->bytesperline = pix->width;
+		break;
+
+	case V4L2_MBUS_FMT_Y8_1X8:
+		pix->pixelformat = V4L2_PIX_FMT_GREY;
+		pix->bytesperline = pix->width;
+		break;
+
+	case V4L2_MBUS_FMT_UV8_1X8:
+		pix->pixelformat = V4L2_PIX_FMT_UV8;
+		pix->bytesperline = pix->width;
+		break;
+
+	default:
+		pr_err("Invalid mbus code set\n");
+	}
+	/* pitch should be 32 bytes aligned */
+	pix->bytesperline = ALIGN(pix->bytesperline, 32);
+	if (pix->pixelformat == V4L2_PIX_FMT_NV12)
+		pix->sizeimage = pix->bytesperline * pix->height +
+				((pix->bytesperline * pix->height) >> 1);
+	else
+		pix->sizeimage = pix->bytesperline * pix->height;
+}
+
+/* ISR for VINT0*/
+static irqreturn_t vpfe_isr(int irq, void *dev_id)
+{
+	struct vpfe_device *vpfe_dev = dev_id;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_isr\n");
+	vpfe_isif_buffer_isr(&vpfe_dev->vpfe_isif);
+	vpfe_resizer_buffer_isr(&vpfe_dev->vpfe_resizer);
+	return IRQ_HANDLED;
+}
+
+/* vpfe_vdint1_isr() - isr handler for VINT1 interrupt */
+static irqreturn_t vpfe_vdint1_isr(int irq, void *dev_id)
+{
+	struct vpfe_device *vpfe_dev = dev_id;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_vdint1_isr\n");
+	vpfe_isif_vidint1_isr(&vpfe_dev->vpfe_isif);
+	return IRQ_HANDLED;
+}
+
+/* vpfe_imp_dma_isr() - ISR for ipipe dma completion */
+static irqreturn_t vpfe_imp_dma_isr(int irq, void *dev_id)
+{
+	struct vpfe_device *vpfe_dev = dev_id;
+
+	v4l2_dbg(1, debug, &vpfe_dev->v4l2_dev, "vpfe_imp_dma_isr\n");
+	vpfe_ipipeif_ss_buffer_isr(&vpfe_dev->vpfe_ipipeif);
+	vpfe_resizer_dma_isr(&vpfe_dev->vpfe_resizer);
+	return IRQ_HANDLED;
+}
+
+/*
+ * vpfe_disable_clock() - Disable clocks for vpfe capture driver
+ * @vpfe_dev - ptr to vpfe capture device
+ *
+ * Disables clocks defined in vpfe configuration. The function
+ * assumes that at least one clock is to be defined which is
+ * true as of now.
+ */
+static void vpfe_disable_clock(struct vpfe_device *vpfe_dev)
+{
+	struct vpfe_config *vpfe_cfg = vpfe_dev->cfg;
+	int i;
+
+	for (i = 0; i < vpfe_cfg->num_clocks; i++) {
+		clk_disable_unprepare(vpfe_dev->clks[i]);
+		clk_put(vpfe_dev->clks[i]);
+	}
+	kzfree(vpfe_dev->clks);
+	v4l2_info(vpfe_dev->pdev->driver, "vpfe capture clocks disabled\n");
+}
+
+/*
+ * vpfe_enable_clock() - Enable clocks for vpfe capture driver
+ * @vpfe_dev - ptr to vpfe capture device
+ *
+ * Enables clocks defined in vpfe configuration. The function
+ * assumes that at least one clock is to be defined which is
+ * true as of now.
+ */
+static int vpfe_enable_clock(struct vpfe_device *vpfe_dev)
+{
+	struct vpfe_config *vpfe_cfg = vpfe_dev->cfg;
+	int ret = -EFAULT;
+	int i;
+
+	if (!vpfe_cfg->num_clocks)
+		return 0;
+
+	vpfe_dev->clks = kzalloc(vpfe_cfg->num_clocks *
+				   sizeof(struct clock *), GFP_KERNEL);
+	if (vpfe_dev->clks == NULL) {
+		v4l2_err(vpfe_dev->pdev->driver, "Memory allocation failed\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < vpfe_cfg->num_clocks; i++) {
+		if (vpfe_cfg->clocks[i] == NULL) {
+			v4l2_err(vpfe_dev->pdev->driver,
+				"clock %s is not defined in vpfe config\n",
+				vpfe_cfg->clocks[i]);
+			goto out;
+		}
+
+		vpfe_dev->clks[i] =
+				clk_get(vpfe_dev->pdev, vpfe_cfg->clocks[i]);
+		if (vpfe_dev->clks[i] == NULL) {
+			v4l2_err(vpfe_dev->pdev->driver,
+				"Failed to get clock %s\n",
+				vpfe_cfg->clocks[i]);
+			goto out;
+		}
+
+		if (clk_prepare_enable(vpfe_dev->clks[i])) {
+			v4l2_err(vpfe_dev->pdev->driver,
+				"vpfe clock %s not enabled\n",
+				vpfe_cfg->clocks[i]);
+			goto out;
+		}
+
+		v4l2_info(vpfe_dev->pdev->driver, "vpss clock %s enabled",
+			  vpfe_cfg->clocks[i]);
+	}
+
+	return 0;
+out:
+	for (i = 0; i < vpfe_cfg->num_clocks; i++)
+		if (vpfe_dev->clks[i]) {
+			clk_disable_unprepare(vpfe_dev->clks[i]);
+			clk_put(vpfe_dev->clks[i]);
+		}
+
+	v4l2_err(vpfe_dev->pdev->driver, "Failed to enable clocks\n");
+	kzfree(vpfe_dev->clks);
+
+	return ret;
+}
+
+/*
+ * vpfe_detach_irq() - Detach IRQs for vpfe capture driver
+ * @vpfe_dev - ptr to vpfe capture device
+ *
+ * Detach all IRQs defined in vpfe configuration.
+ */
+static void vpfe_detach_irq(struct vpfe_device *vpfe_dev)
+{
+	free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
+	free_irq(vpfe_dev->ccdc_irq1, vpfe_dev);
+	free_irq(vpfe_dev->imp_dma_irq, vpfe_dev);
+}
+
+/*
+ * vpfe_attach_irq() - Attach IRQs for vpfe capture driver
+ * @vpfe_dev - ptr to vpfe capture device
+ *
+ * Attach all IRQs defined in vpfe configuration.
+ */
+static int vpfe_attach_irq(struct vpfe_device *vpfe_dev)
+{
+	int ret = 0;
+
+	ret = request_irq(vpfe_dev->ccdc_irq0, vpfe_isr, IRQF_DISABLED,
+			  "vpfe_capture0", vpfe_dev);
+	if (ret < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"Error: requesting VINT0 interrupt\n");
+		return ret;
+	}
+
+	ret = request_irq(vpfe_dev->ccdc_irq1, vpfe_vdint1_isr, IRQF_DISABLED,
+			  "vpfe_capture1", vpfe_dev);
+	if (ret < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"Error: requesting VINT1 interrupt\n");
+		free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
+		return ret;
+	}
+
+	ret = request_irq(vpfe_dev->imp_dma_irq, vpfe_imp_dma_isr,
+			  IRQF_DISABLED, "Imp_Sdram_Irq", vpfe_dev);
+	if (ret < 0) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			 "Error: requesting IMP IRQ interrupt\n");
+		free_irq(vpfe_dev->ccdc_irq1, vpfe_dev);
+		free_irq(vpfe_dev->ccdc_irq0, vpfe_dev);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * register_i2c_devices() - register all i2c v4l2 subdevs
+ * @vpfe_dev - ptr to vpfe capture device
+ *
+ * register all i2c v4l2 subdevs
+ */
+static int register_i2c_devices(struct vpfe_device *vpfe_dev)
+{
+	struct vpfe_ext_subdev_info *sdinfo;
+	struct vpfe_config *vpfe_cfg;
+	struct i2c_adapter *i2c_adap;
+	unsigned int num_subdevs;
+	int ret;
+	int i;
+	int k;
+
+	vpfe_cfg = vpfe_dev->cfg;
+	i2c_adap = i2c_get_adapter(1);
+	num_subdevs = vpfe_cfg->num_subdevs;
+	vpfe_dev->sd =
+		  kzalloc(sizeof(struct v4l2_subdev *)*num_subdevs, GFP_KERNEL);
+	if (vpfe_dev->sd == NULL) {
+		v4l2_err(&vpfe_dev->v4l2_dev,
+			"unable to allocate memory for subdevice\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0, k = 0; i < num_subdevs; i++) {
+		sdinfo = &vpfe_cfg->sub_devs[i];
+		/*
+		 * register subdevices based on interface setting. Currently
+		 * tvp5146 and mt9p031 cannot co-exists due to i2c address
+		 * conflicts. So only one of them is registered. Re-visit this
+		 * once we have support for i2c switch handling in i2c driver
+		 * framework
+		 */
+		if (interface == sdinfo->is_camera) {
+			/* setup input path */
+			if (vpfe_cfg->setup_input &&
+				vpfe_cfg->setup_input(sdinfo->grp_id) < 0) {
+				ret = -EFAULT;
+				v4l2_info(&vpfe_dev->v4l2_dev,
+					  "could not setup input for %s\n",
+						sdinfo->module_name);
+				goto probe_sd_out;
+			}
+			/* Load up the subdevice */
+			vpfe_dev->sd[k] =
+				v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev,
+						  i2c_adap, &sdinfo->board_info,
+						  NULL);
+			if (vpfe_dev->sd[k]) {
+				v4l2_info(&vpfe_dev->v4l2_dev,
+						"v4l2 sub device %s registered\n",
+						sdinfo->module_name);
+
+				vpfe_dev->sd[k]->grp_id = sdinfo->grp_id;
+				k++;
+
+				sdinfo->registered = 1;
+			}
+		} else {
+			v4l2_info(&vpfe_dev->v4l2_dev,
+				  "v4l2 sub device %s is not registered\n",
+				  sdinfo->module_name);
+		}
+	}
+	vpfe_dev->num_ext_subdevs = k;
+
+	return 0;
+
+probe_sd_out:
+	kzfree(vpfe_dev->sd);
+
+	return ret;
+}
+
+/*
+ * vpfe_register_entities() - register all v4l2 subdevs and media entities
+ * @vpfe_dev - ptr to vpfe capture device
+ *
+ * register all v4l2 subdevs, media entities, and creates links
+ * between entities
+ */
+static int vpfe_register_entities(struct vpfe_device *vpfe_dev)
+{
+	unsigned int flags = 0;
+	int ret;
+	int i;
+
+	/* register i2c devices first */
+	ret = register_i2c_devices(vpfe_dev);
+	if (ret)
+		return ret;
+
+	/* register rest of the sub-devs */
+	ret = vpfe_isif_register_entities(&vpfe_dev->vpfe_isif,
+					  &vpfe_dev->v4l2_dev);
+	if (ret)
+		return ret;
+
+	ret = vpfe_ipipeif_register_entities(&vpfe_dev->vpfe_ipipeif,
+					     &vpfe_dev->v4l2_dev);
+	if (ret)
+		goto out_isif_register;
+
+	ret = vpfe_ipipe_register_entities(&vpfe_dev->vpfe_ipipe,
+					   &vpfe_dev->v4l2_dev);
+	if (ret)
+		goto out_ipipeif_register;
+
+	ret = vpfe_resizer_register_entities(&vpfe_dev->vpfe_resizer,
+					     &vpfe_dev->v4l2_dev);
+	if (ret)
+		goto out_ipipe_register;
+
+	/* create links now, starting with external(i2c) entities */
+	for (i = 0; i < vpfe_dev->num_ext_subdevs; i++)
+		/* if entity has no pads (ex: amplifier),
+		   cant establish link */
+		if (vpfe_dev->sd[i]->entity.num_pads) {
+			ret = media_entity_create_link(&vpfe_dev->sd[i]->entity,
+				0, &vpfe_dev->vpfe_isif.subdev.entity,
+				0, flags);
+			if (ret < 0)
+				goto out_resizer_register;
+		}
+
+	ret = media_entity_create_link(&vpfe_dev->vpfe_isif.subdev.entity, 1,
+				       &vpfe_dev->vpfe_ipipeif.subdev.entity,
+				       0, flags);
+	if (ret < 0)
+		goto out_resizer_register;
+
+	ret = media_entity_create_link(&vpfe_dev->vpfe_ipipeif.subdev.entity, 1,
+				       &vpfe_dev->vpfe_ipipe.subdev.entity,
+				       0, flags);
+	if (ret < 0)
+		goto out_resizer_register;
+
+	ret = media_entity_create_link(&vpfe_dev->vpfe_ipipe.subdev.entity,
+			1, &vpfe_dev->vpfe_resizer.crop_resizer.subdev.entity,
+			0, flags);
+	if (ret < 0)
+		goto out_resizer_register;
+
+	ret = media_entity_create_link(&vpfe_dev->vpfe_ipipeif.subdev.entity, 1,
+			&vpfe_dev->vpfe_resizer.crop_resizer.subdev.entity,
+			0, flags);
+	if (ret < 0)
+		goto out_resizer_register;
+
+	ret = v4l2_device_register_subdev_nodes(&vpfe_dev->v4l2_dev);
+	if (ret < 0)
+		goto out_resizer_register;
+
+	return 0;
+
+out_resizer_register:
+	vpfe_resizer_unregister_entities(&vpfe_dev->vpfe_resizer);
+out_ipipe_register:
+	vpfe_ipipe_unregister_entities(&vpfe_dev->vpfe_ipipe);
+out_ipipeif_register:
+	vpfe_ipipeif_unregister_entities(&vpfe_dev->vpfe_ipipeif);
+out_isif_register:
+	vpfe_isif_unregister_entities(&vpfe_dev->vpfe_isif);
+
+	return ret;
+}
+
+/*
+ * vpfe_unregister_entities() - unregister all v4l2 subdevs and media entities
+ * @vpfe_dev - ptr to vpfe capture device
+ *
+ * unregister all v4l2 subdevs and media entities
+ */
+static void vpfe_unregister_entities(struct vpfe_device *vpfe_dev)
+{
+	vpfe_isif_unregister_entities(&vpfe_dev->vpfe_isif);
+	vpfe_ipipeif_unregister_entities(&vpfe_dev->vpfe_ipipeif);
+	vpfe_ipipe_unregister_entities(&vpfe_dev->vpfe_ipipe);
+	vpfe_resizer_unregister_entities(&vpfe_dev->vpfe_resizer);
+}
+
+/*
+ * vpfe_cleanup_modules() - cleanup all non-i2c v4l2 subdevs
+ * @vpfe_dev - ptr to vpfe capture device
+ * @pdev - pointer to platform device
+ *
+ * cleanup all v4l2 subdevs
+ */
+static void vpfe_cleanup_modules(struct vpfe_device *vpfe_dev,
+				 struct platform_device *pdev)
+{
+	vpfe_isif_cleanup(&vpfe_dev->vpfe_isif, pdev);
+	vpfe_ipipeif_cleanup(&vpfe_dev->vpfe_ipipeif, pdev);
+	vpfe_ipipe_cleanup(&vpfe_dev->vpfe_ipipe, pdev);
+	vpfe_resizer_cleanup(&vpfe_dev->vpfe_resizer, pdev);
+}
+
+/*
+ * vpfe_initialize_modules() - initialize all non-i2c v4l2 subdevs
+ * @vpfe_dev - ptr to vpfe capture device
+ * @pdev - pointer to platform device
+ *
+ * intialize all v4l2 subdevs and media entities
+ */
+static int vpfe_initialize_modules(struct vpfe_device *vpfe_dev,
+				   struct platform_device *pdev)
+{
+	int ret;
+
+	ret = vpfe_isif_init(&vpfe_dev->vpfe_isif, pdev);
+	if (ret)
+		return ret;
+
+	ret = vpfe_ipipeif_init(&vpfe_dev->vpfe_ipipeif, pdev);
+	if (ret)
+		goto out_isif_init;
+
+	ret = vpfe_ipipe_init(&vpfe_dev->vpfe_ipipe, pdev);
+	if (ret)
+		goto out_ipipeif_init;
+
+	ret = vpfe_resizer_init(&vpfe_dev->vpfe_resizer, pdev);
+	if (ret)
+		goto out_ipipe_init;
+
+	return 0;
+
+out_ipipe_init:
+	vpfe_ipipe_cleanup(&vpfe_dev->vpfe_ipipe, pdev);
+out_ipipeif_init:
+	vpfe_ipipeif_cleanup(&vpfe_dev->vpfe_ipipeif, pdev);
+out_isif_init:
+	vpfe_isif_cleanup(&vpfe_dev->vpfe_isif, pdev);
+
+	return ret;
+}
+
+/*
+ * vpfe_probe() : vpfe probe function
+ * @pdev: platform device pointer
+ *
+ * This function creates device entries by register itself to the V4L2 driver
+ * and initializes fields of each device objects
+ */
+static __devinit int vpfe_probe(struct platform_device *pdev)
+{
+	struct vpfe_device *vpfe_dev;
+	struct resource *res1;
+	int ret = -ENOMEM;
+
+	vpfe_dev = kzalloc(sizeof(*vpfe_dev), GFP_KERNEL);
+	if (!vpfe_dev) {
+		v4l2_err(pdev->dev.driver,
+			"Failed to allocate memory for vpfe_dev\n");
+		return ret;
+	}
+
+	if (pdev->dev.platform_data == NULL) {
+		v4l2_err(pdev->dev.driver, "Unable to get vpfe config\n");
+		ret = -ENOENT;
+		goto probe_free_dev_mem;
+	}
+
+	vpfe_dev->cfg = pdev->dev.platform_data;
+	if (vpfe_dev->cfg->card_name == NULL ||
+			vpfe_dev->cfg->sub_devs == NULL) {
+		v4l2_err(pdev->dev.driver, "null ptr in vpfe_cfg\n");
+		ret = -ENOENT;
+		goto probe_free_dev_mem;
+	}
+
+	/* Get VINT0 irq resource */
+	res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res1) {
+		v4l2_err(pdev->dev.driver,
+			 "Unable to get interrupt for VINT0\n");
+		ret = -ENOENT;
+		goto probe_free_dev_mem;
+	}
+	vpfe_dev->ccdc_irq0 = res1->start;
+
+	/* Get VINT1 irq resource */
+	res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
+	if (!res1) {
+		v4l2_err(pdev->dev.driver,
+			 "Unable to get interrupt for VINT1\n");
+		ret = -ENOENT;
+		goto probe_free_dev_mem;
+	}
+	vpfe_dev->ccdc_irq1 = res1->start;
+
+	/* Get DMA irq resource */
+	res1 = platform_get_resource(pdev, IORESOURCE_IRQ, 2);
+	if (!res1) {
+		v4l2_err(pdev->dev.driver,
+			 "Unable to get interrupt for DMA\n");
+		ret = -ENOENT;
+		goto probe_free_dev_mem;
+	}
+	vpfe_dev->imp_dma_irq = res1->start;
+
+	vpfe_dev->pdev = &pdev->dev;
+
+	/* enable vpss clocks */
+	ret = vpfe_enable_clock(vpfe_dev);
+	if (ret)
+		goto probe_free_dev_mem;
+
+	if (vpfe_initialize_modules(vpfe_dev, pdev))
+		goto probe_disable_clock;
+
+	vpfe_dev->media_dev.dev = vpfe_dev->pdev;
+	strcpy((char *)&vpfe_dev->media_dev.model, "davinci-media");
+
+	ret = media_device_register(&vpfe_dev->media_dev);
+	if (ret) {
+		v4l2_err(pdev->dev.driver,
+			"Unable to register media device.\n");
+		goto probe_out_entities_cleanup;
+	}
+
+	vpfe_dev->v4l2_dev.mdev = &vpfe_dev->media_dev;
+	ret = v4l2_device_register(&pdev->dev, &vpfe_dev->v4l2_dev);
+	if (ret) {
+		v4l2_err(pdev->dev.driver, "Unable to register v4l2 device.\n");
+		goto probe_out_media_unregister;
+	}
+
+	v4l2_info(&vpfe_dev->v4l2_dev, "v4l2 device registered\n");
+	/* set the driver data in platform device */
+	platform_set_drvdata(pdev, vpfe_dev);
+	/* register subdevs/entities */
+	if (vpfe_register_entities(vpfe_dev))
+		goto probe_out_v4l2_unregister;
+
+	ret = vpfe_attach_irq(vpfe_dev);
+	if (ret)
+		goto probe_out_entities_unregister;
+
+	return 0;
+
+probe_out_entities_unregister:
+	vpfe_unregister_entities(vpfe_dev);
+	kzfree(vpfe_dev->sd);
+probe_out_v4l2_unregister:
+	v4l2_device_unregister(&vpfe_dev->v4l2_dev);
+probe_out_media_unregister:
+	media_device_unregister(&vpfe_dev->media_dev);
+probe_out_entities_cleanup:
+	vpfe_cleanup_modules(vpfe_dev, pdev);
+probe_disable_clock:
+	vpfe_disable_clock(vpfe_dev);
+probe_free_dev_mem:
+	kzfree(vpfe_dev);
+
+	return ret;
+}
+
+/*
+ * vpfe_remove : This function un-registers device from V4L2 driver
+ */
+static int vpfe_remove(struct platform_device *pdev)
+{
+	struct vpfe_device *vpfe_dev = platform_get_drvdata(pdev);
+
+	v4l2_info(pdev->dev.driver, "vpfe_remove\n");
+
+	kzfree(vpfe_dev->sd);
+	vpfe_detach_irq(vpfe_dev);
+	vpfe_unregister_entities(vpfe_dev);
+	vpfe_cleanup_modules(vpfe_dev, pdev);
+	v4l2_device_unregister(&vpfe_dev->v4l2_dev);
+	media_device_unregister(&vpfe_dev->media_dev);
+	vpfe_disable_clock(vpfe_dev);
+	kzfree(vpfe_dev);
+
+	return 0;
+}
+
+static struct platform_driver vpfe_driver = {
+	.driver = {
+		.name = CAPTURE_DRV_NAME,
+		.owner = THIS_MODULE,
+	},
+	.probe = vpfe_probe,
+	.remove = __devexit_p(vpfe_remove),
+};
+
+/**
+ * vpfe_init : This function registers device driver
+ */
+static __init int vpfe_init(void)
+{
+	/* Register driver to the kernel */
+	return platform_driver_register(&vpfe_driver);
+}
+
+/**
+ * vpfe_cleanup : This function un-registers device driver
+ */
+static void vpfe_cleanup(void)
+{
+	platform_driver_unregister(&vpfe_driver);
+}
+
+module_init(vpfe_init);
+module_exit(vpfe_cleanup);
diff --git a/drivers/media/platform/davinci/vpfe_mc_capture.h b/drivers/media/platform/davinci/vpfe_mc_capture.h
new file mode 100644
index 0000000..68f6fe4
--- /dev/null
+++ b/drivers/media/platform/davinci/vpfe_mc_capture.h
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * Contributors:
+ *      Manjunath Hadli <manjunath.hadli@ti.com>
+ *      Prabhakar Lad <prabhakar.lad@ti.com>
+ */
+
+#ifndef _DAVINCI_VPFE_MC_CAPTURE_H
+#define _DAVINCI_VPFE_MC_CAPTURE_H
+
+#include "dm365_ipipe.h"
+#include "dm365_ipipeif.h"
+#include "dm365_isif.h"
+#include "dm365_resizer.h"
+#include "vpfe_video.h"
+
+#define VPFE_MAJOR_RELEASE		0
+#define VPFE_MINOR_RELEASE		0
+#define VPFE_BUILD			1
+#define VPFE_CAPTURE_VERSION_CODE       ((VPFE_MAJOR_RELEASE << 16) | \
+					(VPFE_MINOR_RELEASE << 8)  | \
+					VPFE_BUILD)
+
+/* IPIPE hardware limits */
+#define IPIPE_MAX_OUTPUT_WIDTH_A	2176
+#define IPIPE_MAX_OUTPUT_WIDTH_B	640
+
+/* Based on max resolution supported. QXGA */
+#define IPIPE_MAX_OUTPUT_HEIGHT_A	1536
+/* Based on max resolution supported. VGA */
+#define IPIPE_MAX_OUTPUT_HEIGHT_B	480
+
+#define to_vpfe_device(ptr_module)				\
+	container_of(ptr_module, struct vpfe_device, vpfe_##ptr_module)
+#define to_device(ptr_module)						\
+	(to_vpfe_device(ptr_module)->dev)
+
+struct vpfe_device {
+	/* external registered sub devices */
+	struct v4l2_subdev		**sd;
+	/* number of registered external subdevs */
+	unsigned int			num_ext_subdevs;
+	/* vpfe cfg */
+	struct vpfe_config		*cfg;
+	/* clock ptrs for vpfe capture */
+	struct clk			**clks;
+	/* V4l2 device */
+	struct v4l2_device		v4l2_dev;
+	/* parent device */
+	struct device			*pdev;
+	/* IRQ number for DMA transfer completion at the image processor */
+	unsigned int			imp_dma_irq;
+	/* CCDC IRQs used when CCDC/ISIF output to SDRAM */
+	unsigned int			ccdc_irq0;
+	unsigned int			ccdc_irq1;
+	/* maximum video memory that is available*/
+	unsigned int			video_limit;
+	/* media device */
+	struct media_device		media_dev;
+	/* ccdc subdevice */
+	struct vpfe_isif_device		vpfe_isif;
+	/* ipipeif subdevice */
+	struct vpfe_ipipeif_device	vpfe_ipipeif;
+	/* ipipe subdevice */
+	struct vpfe_ipipe_device	vpfe_ipipe;
+	/* resizer subdevice */
+	struct vpfe_resizer_device	vpfe_resizer;
+};
+
+/* File handle structure */
+struct vpfe_fh {
+	struct v4l2_fh vfh;
+	struct vpfe_video_device *video;
+	/* Indicates whether this file handle is doing IO */
+	u8 io_allowed;
+	/* Used to keep track priority of this instance */
+	enum v4l2_priority prio;
+};
+
+void mbus_to_pix(const struct v4l2_mbus_framefmt *mbus,
+			   struct v4l2_pix_format *pix);
+
+#endif		/* _DAVINCI_VPFE_MC_CAPTURE_H */
diff --git a/include/media/davinci/vpfe.h b/include/media/davinci/vpfe.h
new file mode 100644
index 0000000..0587bc5
--- /dev/null
+++ b/include/media/davinci/vpfe.h
@@ -0,0 +1,86 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * Contributors:
+ *      Manjunath Hadli <manjunath.hadli@ti.com>
+ *      Prabhakar Lad <prabhakar.lad@ti.com>
+ */
+
+#ifndef _VPFE_H
+#define _VPFE_H
+
+#ifdef __KERNEL__
+#include <linux/v4l2-subdev.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+
+#include <media/davinci/vpfe_types.h>
+
+#define CAPTURE_DRV_NAME	"vpfe-capture"
+
+struct vpfe_route {
+	__u32 input;
+	__u32 output;
+};
+
+enum vpfe_subdev_id {
+	VPFE_SUBDEV_TVP5146 = 1,
+	VPFE_SUBDEV_MT9T031 = 2,
+	VPFE_SUBDEV_TVP7002 = 3,
+	VPFE_SUBDEV_MT9P031 = 4,
+};
+
+struct vpfe_ext_subdev_info {
+	/* v4l2 subdev */
+	struct v4l2_subdev *subdev;
+	/* Sub device module name */
+	char module_name[32];
+	/* Sub device group id */
+	int grp_id;
+	/* Number of inputs supported */
+	int num_inputs;
+	/* inputs available at the sub device */
+	struct v4l2_input *inputs;
+	/* Sub dev routing information for each input */
+	struct vpfe_route *routes;
+	/* ccdc bus/interface configuration */
+	struct vpfe_hw_if_param ccdc_if_params;
+	/* i2c subdevice board info */
+	struct i2c_board_info board_info;
+	/* Is this a camera sub device ? */
+	unsigned is_camera:1;
+	/* check if sub dev supports routing */
+	unsigned can_route:1;
+	/* registered ? */
+	unsigned registered:1;
+};
+
+struct vpfe_config {
+	/* Number of sub devices connected to vpfe */
+	int num_subdevs;
+	/* information about each subdev */
+	struct vpfe_ext_subdev_info *sub_devs;
+	/* evm card info */
+	char *card_name;
+	/* setup function for the input path */
+	int (*setup_input)(enum vpfe_subdev_id id);
+	/* number of clocks */
+	int num_clocks;
+	/* clocks used for vpfe capture */
+	char *clocks[];
+};
+#endif
+#endif
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index e194387..777d82e 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -87,6 +87,7 @@ header-y += cramfs_fs.h
 header-y += cuda.h
 header-y += cyclades.h
 header-y += cycx_cfm.h
+header-y += davinci_vpfe.h
 header-y += dcbnl.h
 header-y += dccp.h
 header-y += dlm.h
diff --git a/include/uapi/linux/davinci_vpfe.h b/include/uapi/linux/davinci_vpfe.h
new file mode 100644
index 0000000..e1b29ac
--- /dev/null
+++ b/include/uapi/linux/davinci_vpfe.h
@@ -0,0 +1,1285 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ *
+ * Contributors:
+ *      Manjunath Hadli <manjunath.hadli@ti.com>
+ *      Prabhakar Lad <prabhakar.lad@ti.com>
+ */
+
+#ifndef _DAVINCI_VPFE_USER_H
+#define _DAVINCI_VPFE_USER_H
+
+#include <linux/types.h>
+#include <linux/videodev2.h>
+
+/*
+ * Private IOCTL
+ *
+ * VIDIOC_VPFE_ISIF_S_RAW_PARAMS: Set raw params in isif
+ * VIDIOC_VPFE_ISIF_G_RAW_PARAMS: Get raw params from isif
+ * VIDIOC_VPFE_PRV_S_CONFIG: Set ipipe engine configuration
+ * VIDIOC_VPFE_PRV_G_CONFIG: Get ipipe engine configuration
+ * VIDIOC_VPFE_RSZ_S_CONFIG: Set resizer engine configuration
+ * VIDIOC_VPFE_RSZ_G_CONFIG: Get resizer engine configuration
+ */
+
+#define VIDIOC_VPFE_ISIF_S_RAW_PARAMS \
+	_IOW('V', BASE_VIDIOC_PRIVATE + 1,  struct vpfe_isif_raw_config)
+#define VIDIOC_VPFE_ISIF_G_RAW_PARAMS \
+	_IOR('V', BASE_VIDIOC_PRIVATE + 2, struct vpfe_isif_raw_config)
+#define VIDIOC_VPFE_IPIPE_S_CONFIG \
+	_IOWR('P', BASE_VIDIOC_PRIVATE + 3, struct vpfe_ipipe_config)
+#define VIDIOC_VPFE_IPIPE_G_CONFIG \
+	_IOWR('P', BASE_VIDIOC_PRIVATE + 4, struct vpfe_ipipe_config)
+#define VIDIOC_VPFE_RSZ_S_CONFIG \
+	_IOWR('R', BASE_VIDIOC_PRIVATE + 5, struct vpfe_rsz_config)
+#define VIDIOC_VPFE_RSZ_G_CONFIG \
+	_IOWR('R', BASE_VIDIOC_PRIVATE + 6, struct vpfe_rsz_config)
+
+/*
+ * Private Control's for ISIF
+ */
+#define VPFE_ISIF_CID_CRGAIN           (V4L2_CID_USER_BASE | 0xa001)
+#define VPFE_ISIF_CID_CGRGAIN          (V4L2_CID_USER_BASE | 0xa002)
+#define VPFE_ISIF_CID_CGBGAIN          (V4L2_CID_USER_BASE | 0xa003)
+#define VPFE_ISIF_CID_CBGAIN           (V4L2_CID_USER_BASE | 0xa004)
+#define VPFE_ISIF_CID_GAIN_OFFSET      (V4L2_CID_USER_BASE | 0xa005)
+
+/************************************************************************
+ *   Vertical Defect Correction parameters
+ ***********************************************************************/
+
+/**
+ * vertical defect correction methods
+ */
+enum vpfe_isif_vdfc_corr_mode {
+	/* Defect level subtraction. Just fed through if saturating */
+	VPFE_ISIF_VDFC_NORMAL,
+	/**
+	 * Defect level subtraction. Horizontal interpolation ((i-2)+(i+2))/2
+	 * if data saturating
+	 */
+	VPFE_ISIF_VDFC_HORZ_INTERPOL_IF_SAT,
+	/* Horizontal interpolation (((i-2)+(i+2))/2) */
+	VPFE_ISIF_VDFC_HORZ_INTERPOL
+};
+
+/**
+ * Max Size of the Vertical Defect Correction table
+ */
+#define VPFE_ISIF_VDFC_TABLE_SIZE	8
+
+/**
+ * Values used for shifting up the vdfc defect level
+ */
+enum vpfe_isif_vdfc_shift {
+	/* No Shift */
+	VPFE_ISIF_VDFC_NO_SHIFT,
+	/* Shift by 1 bit */
+	VPFE_ISIF_VDFC_SHIFT_1,
+	/* Shift by 2 bit */
+	VPFE_ISIF_VDFC_SHIFT_2,
+	/* Shift by 3 bit */
+	VPFE_ISIF_VDFC_SHIFT_3,
+	/* Shift by 4 bit */
+	VPFE_ISIF_VDFC_SHIFT_4
+};
+
+/**
+ * Defect Correction (DFC) table entry
+ */
+struct vpfe_isif_vdfc_entry {
+	/* vertical position of defect */
+	unsigned short pos_vert;
+	/* horizontal position of defect */
+	unsigned short pos_horz;
+	/**
+	 * Defect level of Vertical line defect position. This is subtracted
+	 * from the data at the defect position
+	 */
+	unsigned char level_at_pos;
+	/**
+	 * Defect level of the pixels upper than the vertical line defect.
+	 * This is subtracted from the data
+	 */
+	unsigned char level_up_pixels;
+	/**
+	 * Defect level of the pixels lower than the vertical line defect.
+	 * This is subtracted from the data
+	 */
+	unsigned char level_low_pixels;
+};
+
+/**
+ * Structure for Defect Correction (DFC) parameter
+ */
+struct vpfe_isif_dfc {
+	/* enable vertical defect correction */
+	unsigned char en;
+	/* Correction methods */
+	enum vpfe_isif_vdfc_corr_mode corr_mode;
+	/**
+	 * 0 - whole line corrected, 1 - not
+	 * pixels upper than the defect
+	 */
+	unsigned char corr_whole_line;
+	/**
+	 * defect level shift value. level_at_pos, level_upper_pos,
+	 * and level_lower_pos can be shifted up by this value
+	 */
+	enum vpfe_isif_vdfc_shift def_level_shift;
+	/* defect saturation level */
+	unsigned short def_sat_level;
+	/* number of vertical defects. Max is VPFE_ISIF_VDFC_TABLE_SIZE */
+	short num_vdefects;
+	/* VDFC table ptr */
+	struct vpfe_isif_vdfc_entry table[VPFE_ISIF_VDFC_TABLE_SIZE];
+};
+
+/************************************************************************
+*   Digital/Black clamp or DC Subtract parameters
+************************************************************************/
+/**
+ * Horizontal Black Clamp modes
+ */
+enum vpfe_isif_horz_bc_mode {
+	/**
+	 * Horizontal clamp disabled. Only vertical clamp
+	 * value is subtracted
+	 */
+	VPFE_ISIF_HORZ_BC_DISABLE,
+	/**
+	 * Horizontal clamp value is calculated and subtracted
+	 * from image data along with vertical clamp value
+	 */
+	VPFE_ISIF_HORZ_BC_CLAMP_CALC_ENABLED,
+	/**
+	 * Horizontal clamp value calculated from previous image
+	 * is subtracted from image data along with vertical clamp
+	 * value. How the horizontal clamp value for the first image
+	 * is calculated in this case ???
+	 */
+	VPFE_ISIF_HORZ_BC_CLAMP_NOT_UPDATED
+};
+
+/**
+ * Base window selection for Horizontal Black Clamp calculations
+ */
+enum vpfe_isif_horz_bc_base_win_sel {
+	/* Select Most left window for bc calculation */
+	VPFE_ISIF_SEL_MOST_LEFT_WIN,
+
+	/* Select Most right window for bc calculation */
+	VPFE_ISIF_SEL_MOST_RIGHT_WIN,
+};
+
+/* Size of window in horizontal direction for horizontal bc */
+enum vpfe_isif_horz_bc_sz_h {
+	VPFE_ISIF_HORZ_BC_SZ_H_2PIXELS,
+	VPFE_ISIF_HORZ_BC_SZ_H_4PIXELS,
+	VPFE_ISIF_HORZ_BC_SZ_H_8PIXELS,
+	VPFE_ISIF_HORZ_BC_SZ_H_16PIXELS
+};
+
+/* Size of window in vertcal direction for vertical bc */
+enum vpfe_isif_horz_bc_sz_v {
+	VPFE_ISIF_HORZ_BC_SZ_H_32PIXELS,
+	VPFE_ISIF_HORZ_BC_SZ_H_64PIXELS,
+	VPFE_ISIF_HORZ_BC_SZ_H_128PIXELS,
+	VPFE_ISIF_HORZ_BC_SZ_H_256PIXELS
+};
+
+/**
+ * Structure for Horizontal Black Clamp config params
+ */
+struct vpfe_isif_horz_bclamp {
+	/* horizontal clamp mode */
+	enum vpfe_isif_horz_bc_mode mode;
+	/**
+	 * pixel value limit enable.
+	 *  0 - limit disabled
+	 *  1 - pixel value limited to 1023
+	 */
+	unsigned char clamp_pix_limit;
+	/**
+	 * Select most left or right window for clamp val
+	 * calculation
+	 */
+	enum vpfe_isif_horz_bc_base_win_sel base_win_sel_calc;
+	/* Window count per color for calculation. range 1-32 */
+	unsigned char win_count_calc;
+	/* Window start position - horizontal for calculation. 0 - 8191 */
+	unsigned short win_start_h_calc;
+	/* Window start position - vertical for calculation 0 - 8191 */
+	unsigned short win_start_v_calc;
+	/* Width of the sample window in pixels for calculation */
+	enum vpfe_isif_horz_bc_sz_h win_h_sz_calc;
+	/* Height of the sample window in pixels for calculation */
+	enum vpfe_isif_horz_bc_sz_v win_v_sz_calc;
+};
+
+/**
+ * Black Clamp vertical reset values
+ */
+enum vpfe_isif_vert_bc_reset_val_sel {
+	/* Reset value used is the clamp value calculated */
+	VPFE_ISIF_VERT_BC_USE_HORZ_CLAMP_VAL,
+	/* Reset value used is reset_clamp_val configured */
+	VPFE_ISIF_VERT_BC_USE_CONFIG_CLAMP_VAL,
+	/* No update, previous image value is used */
+	VPFE_ISIF_VERT_BC_NO_UPDATE
+};
+
+enum vpfe_isif_vert_bc_sz_h {
+	VPFE_ISIF_VERT_BC_SZ_H_2PIXELS,
+	VPFE_ISIF_VERT_BC_SZ_H_4PIXELS,
+	VPFE_ISIF_VERT_BC_SZ_H_8PIXELS,
+	VPFE_ISIF_VERT_BC_SZ_H_16PIXELS,
+	VPFE_ISIF_VERT_BC_SZ_H_32PIXELS,
+	VPFE_ISIF_VERT_BC_SZ_H_64PIXELS
+};
+
+/**
+ * Structure for Vertical Black Clamp configuration params
+ */
+struct vpfe_isif_vert_bclamp {
+	/* Reset value selection for vertical clamp calculation */
+	enum vpfe_isif_vert_bc_reset_val_sel reset_val_sel;
+	/* U12 value if reset_sel = ISIF_BC_VERT_USE_CONFIG_CLAMP_VAL */
+	unsigned short reset_clamp_val;
+	/**
+	 * U8Q8. Line average coefficient used in vertical clamp
+	 * calculation
+	 */
+	unsigned char line_ave_coef;
+	/* Width in pixels of the optical black region used for calculation. */
+	enum vpfe_isif_vert_bc_sz_h ob_h_sz_calc;
+	/* Height of the optical black region for calculation */
+	unsigned short ob_v_sz_calc;
+	/* Optical black region start position - horizontal. 0 - 8191 */
+	unsigned short ob_start_h;
+	/* Optical black region start position - vertical 0 - 8191 */
+	unsigned short ob_start_v;
+};
+
+/**
+ * Structure for Black Clamp configuration params
+ */
+struct vpfe_isif_black_clamp {
+	/**
+	 * this offset value is added irrespective of the clamp
+	 * enable status. S13
+	 */
+	unsigned short dc_offset;
+	/**
+	 * Enable black/digital clamp value to be subtracted
+	 * from the image data
+	 */
+	unsigned char en;
+	/**
+	 * black clamp mode. same/separate clamp for 4 colors
+	 * 0 - disable - same clamp value for all colors
+	 * 1 - clamp value calculated separately for all colors
+	 */
+	unsigned char bc_mode_color;
+	/* Vertical start position for bc subtraction */
+	unsigned short vert_start_sub;
+	/* Black clamp for horizontal direction */
+	struct vpfe_isif_horz_bclamp horz;
+	/* Black clamp for vertical direction */
+	struct vpfe_isif_vert_bclamp vert;
+};
+
+/*************************************************************************
+** Color Space Conversion (CSC)
+*************************************************************************/
+/**
+ * Number of Coefficient values used for CSC
+ */
+#define VPFE_ISIF_CSC_NUM_COEFF 16
+
+struct float_8_bit {
+	/* 8 bit integer part */
+	__u8 integer;
+	/* 8 bit decimal part */
+	__u8 decimal;
+};
+
+struct float_16_bit {
+	/* 16 bit integer part */
+	__u16 integer;
+	/* 16 bit decimal part */
+	__u16 decimal;
+};
+
+/*************************************************************************
+**  Color Space Conversion parameters
+*************************************************************************/
+/**
+ * Structure used for CSC config params
+ */
+struct vpfe_isif_color_space_conv {
+	/* Enable color space conversion */
+	unsigned char en;
+	/**
+	 * csc coefficient table. S8Q5, M00 at index 0, M01 at index 1, and
+	 * so forth
+	 */
+	struct float_8_bit coeff[VPFE_ISIF_CSC_NUM_COEFF];
+};
+
+enum vpfe_isif_datasft {
+	/* No Shift */
+	VPFE_ISIF_NO_SHIFT,
+	/* 1 bit Shift */
+	VPFE_ISIF_1BIT_SHIFT,
+	/* 2 bit Shift */
+	VPFE_ISIF_2BIT_SHIFT,
+	/* 3 bit Shift */
+	VPFE_ISIF_3BIT_SHIFT,
+	/* 4 bit Shift */
+	VPFE_ISIF_4BIT_SHIFT,
+	/* 5 bit Shift */
+	VPFE_ISIF_5BIT_SHIFT,
+	/* 6 bit Shift */
+	VPFE_ISIF_6BIT_SHIFT
+};
+
+#define VPFE_ISIF_LINEAR_TAB_SIZE		192
+/*************************************************************************
+**  Linearization parameters
+*************************************************************************/
+/**
+ * Structure for Sensor data linearization
+ */
+struct vpfe_isif_linearize {
+	/* Enable or Disable linearization of data */
+	unsigned char en;
+	/* Shift value applied */
+	enum vpfe_isif_datasft corr_shft;
+	/* scale factor applied U11Q10 */
+	struct float_16_bit scale_fact;
+	/* Size of the linear table */
+	unsigned short table[VPFE_ISIF_LINEAR_TAB_SIZE];
+};
+
+/*************************************************************************
+**  ISIF Raw configuration parameters
+*************************************************************************/
+enum vpfe_isif_fmt_mode {
+	VPFE_ISIF_SPLIT,
+	VPFE_ISIF_COMBINE
+};
+
+enum vpfe_isif_lnum {
+	VPFE_ISIF_1LINE,
+	VPFE_ISIF_2LINES,
+	VPFE_ISIF_3LINES,
+	VPFE_ISIF_4LINES
+};
+
+enum vpfe_isif_line {
+	VPFE_ISIF_1STLINE,
+	VPFE_ISIF_2NDLINE,
+	VPFE_ISIF_3RDLINE,
+	VPFE_ISIF_4THLINE
+};
+
+struct vpfe_isif_fmtplen {
+	/**
+	 * number of program entries for SET0, range 1 - 16
+	 * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
+	 * ISIF_COMBINE
+	 */
+	unsigned short plen0;
+	/**
+	 * number of program entries for SET1, range 1 - 16
+	 * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
+	 * ISIF_COMBINE
+	 */
+	unsigned short plen1;
+	/**
+	 * number of program entries for SET2, range 1 - 16
+	 * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
+	 * ISIF_COMBINE
+	 */
+	unsigned short plen2;
+	/**
+	 * number of program entries for SET3, range 1 - 16
+	 * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is
+	 * ISIF_COMBINE
+	 */
+	unsigned short plen3;
+};
+
+struct vpfe_isif_fmt_cfg {
+	/* Split or combine or line alternate */
+	enum vpfe_isif_fmt_mode fmtmode;
+	/* enable or disable line alternating mode */
+	unsigned char ln_alter_en;
+	/* Split/combine line number */
+	enum vpfe_isif_lnum lnum;
+	/* Address increment Range 1 - 16 */
+	unsigned int addrinc;
+};
+
+struct vpfe_isif_fmt_addr_ptr {
+	/* Initial address */
+	unsigned int init_addr;
+	/* output line number */
+	enum vpfe_isif_line out_line;
+};
+
+struct vpfe_isif_fmtpgm_ap {
+	/* program address pointer */
+	unsigned char pgm_aptr;
+	/* program address increment or decrement */
+	unsigned char pgmupdt;
+};
+
+struct vpfe_isif_data_formatter {
+	/* Enable/Disable data formatter */
+	unsigned char en;
+	/* data formatter configuration */
+	struct vpfe_isif_fmt_cfg cfg;
+	/* Formatter program entries length */
+	struct vpfe_isif_fmtplen plen;
+	/* first pixel in a line fed to formatter */
+	unsigned short fmtrlen;
+	/* HD interval for output line. Only valid when split line */
+	unsigned short fmthcnt;
+	/* formatter address pointers */
+	struct vpfe_isif_fmt_addr_ptr fmtaddr_ptr[16];
+	/* program enable/disable */
+	unsigned char pgm_en[32];
+	/* program address pointers */
+	struct vpfe_isif_fmtpgm_ap fmtpgm_ap[32];
+};
+
+struct vpfe_isif_df_csc {
+	/* Color Space Conversion configuration, 0 - csc, 1 - df */
+	unsigned int df_or_csc;
+	/* csc configuration valid if df_or_csc is 0 */
+	struct vpfe_isif_color_space_conv csc;
+	/* data formatter configuration valid if df_or_csc is 1 */
+	struct vpfe_isif_data_formatter df;
+	/* start pixel in a line at the input */
+	unsigned int start_pix;
+	/* number of pixels in input line */
+	unsigned int num_pixels;
+	/* start line at the input */
+	unsigned int start_line;
+	/* number of lines at the input */
+	unsigned int num_lines;
+};
+
+struct vpfe_isif_gain_offsets_adj {
+	/* Enable or Disable Gain adjustment for SDRAM data */
+	unsigned char gain_sdram_en;
+	/* Enable or Disable Gain adjustment for IPIPE data */
+	unsigned char gain_ipipe_en;
+	/* Enable or Disable Gain adjustment for H3A data */
+	unsigned char gain_h3a_en;
+	/* Enable or Disable Gain adjustment for SDRAM data */
+	unsigned char offset_sdram_en;
+	/* Enable or Disable Gain adjustment for IPIPE data */
+	unsigned char offset_ipipe_en;
+	/* Enable or Disable Gain adjustment for H3A data */
+	unsigned char offset_h3a_en;
+};
+
+struct vpfe_isif_cul {
+	/* Horizontal Cull pattern for odd lines */
+	unsigned char hcpat_odd;
+	/* Horizontal Cull pattern for even lines */
+	unsigned char hcpat_even;
+	/* Vertical Cull pattern */
+	unsigned char vcpat;
+	/* Enable or disable lpf. Apply when cull is enabled */
+	unsigned char en_lpf;
+};
+
+/* all the stuff in this struct will be provided by userland */
+struct vpfe_isif_raw_config {
+	/* Linearization parameters for image sensor data input */
+	struct vpfe_isif_linearize linearize;
+	/* Data formatter or CSC */
+	struct vpfe_isif_df_csc df_csc;
+	/* Defect Pixel Correction (DFC) confguration */
+	struct vpfe_isif_dfc dfc;
+	/* Black/Digital Clamp configuration */
+	struct vpfe_isif_black_clamp bclamp;
+	/* Gain, offset adjustments */
+	struct vpfe_isif_gain_offsets_adj gain_offset;
+	/* Culling */
+	struct vpfe_isif_cul culling;
+	/* horizontal offset for Gain/LSC/DFC */
+	unsigned short horz_offset;
+	/* vertical offset for Gain/LSC/DFC */
+	unsigned short vert_offset;
+};
+
+/**********************************************************************
+      IPIPE API Structures
+**********************************************************************/
+
+/* IPIPE module configurations */
+
+/* IPIPE input configuration */
+#define VPFE_IPIPE_INPUT_CONFIG		(1 << 0)
+/* LUT based Defect Pixel Correction */
+#define VPFE_IPIPE_LUTDPC		(1 << 1)
+/* On the fly (OTF) Defect Pixel Correction */
+#define VPFE_IPIPE_OTFDPC		(1 << 2)
+/* Noise Filter - 1 */
+#define VPFE_IPIPE_NF1			(1 << 3)
+/* Noise Filter - 2 */
+#define VPFE_IPIPE_NF2			(1 << 4)
+/* White Balance.  Also a control ID */
+#define VPFE_IPIPE_WB			(1 << 5)
+/* 1st RGB to RBG Blend module */
+#define VPFE_IPIPE_RGB2RGB_1		(1 << 6)
+/* 2nd RGB to RBG Blend module */
+#define VPFE_IPIPE_RGB2RGB_2		(1 << 7)
+/* Gamma Correction */
+#define VPFE_IPIPE_GAMMA		(1 << 8)
+/* 3D LUT color conversion */
+#define VPFE_IPIPE_3D_LUT		(1 << 9)
+/* RGB to YCbCr module */
+#define VPFE_IPIPE_RGB2YUV		(1 << 10)
+/* YUV 422 conversion module */
+#define VPFE_IPIPE_YUV422_CONV		(1 << 11)
+/* Edge Enhancement */
+#define VPFE_IPIPE_YEE			(1 << 12)
+/* Green Imbalance Correction */
+#define VPFE_IPIPE_GIC			(1 << 13)
+/* CFA Interpolation */
+#define VPFE_IPIPE_CFA			(1 << 14)
+/* Chroma Artifact Reduction */
+#define VPFE_IPIPE_CAR			(1 << 15)
+/* Chroma Gain Suppression */
+#define VPFE_IPIPE_CGS			(1 << 16)
+/* Global brightness and contrast control */
+#define VPFE_IPIPE_GBCE			(1 << 17)
+
+#define VPFE_IPIPE_MAX_MODULES		18
+
+struct ipipe_float_u16 {
+	unsigned short integer;
+	unsigned short decimal;
+};
+
+struct ipipe_float_s16 {
+	short integer;
+	unsigned short decimal;
+};
+
+struct ipipe_float_u8 {
+	unsigned char integer;
+	unsigned char decimal;
+};
+
+/* Copy method selection for vertical correction
+ *  Used when ipipe_dfc_corr_meth is IPIPE_DPC_CTORB_AFTER_HINT
+ */
+enum vpfe_ipipe_dpc_corr_meth {
+	/* replace by black or white dot specified by repl_white */
+	VPFE_IPIPE_DPC_REPL_BY_DOT = 0,
+	/* Copy from left */
+	VPFE_IPIPE_DPC_CL = 1,
+	/* Copy from right */
+	VPFE_IPIPE_DPC_CR = 2,
+	/* Horizontal interpolation */
+	VPFE_IPIPE_DPC_H_INTP = 3,
+	/* Vertical interpolation */
+	VPFE_IPIPE_DPC_V_INTP = 4,
+	/* Copy from top  */
+	VPFE_IPIPE_DPC_CT = 5,
+	/* Copy from bottom */
+	VPFE_IPIPE_DPC_CB = 6,
+	/* 2D interpolation */
+	VPFE_IPIPE_DPC_2D_INTP = 7,
+};
+
+struct vpfe_ipipe_lutdpc_entry {
+	/* Horizontal position */
+	unsigned short horz_pos;
+	/* vertical position */
+	unsigned short vert_pos;
+	enum vpfe_ipipe_dpc_corr_meth method;
+};
+
+#define VPFE_IPIPE_MAX_SIZE_DPC 256
+
+/* Structure for configuring DPC module */
+struct vpfe_ipipe_lutdpc {
+	/* 0 - disable, 1 - enable */
+	unsigned char en;
+	/* 0 - replace with black dot, 1 - white dot when correction
+	 * method is  IPIPE_DFC_REPL_BY_DOT=0,
+	 */
+	unsigned char repl_white;
+	/* number of entries in the correction table. Currently only
+	 * support up-to 256 entries. infinite mode is not supported
+	 */
+	unsigned short dpc_size;
+	struct vpfe_ipipe_lutdpc_entry table[VPFE_IPIPE_MAX_SIZE_DPC];
+};
+
+enum vpfe_ipipe_otfdpc_det_meth {
+	VPFE_IPIPE_DPC_OTF_MIN_MAX,
+	VPFE_IPIPE_DPC_OTF_MIN_MAX2
+};
+
+struct vpfe_ipipe_otfdpc_thr {
+	unsigned short r;
+	unsigned short gr;
+	unsigned short gb;
+	unsigned short b;
+};
+
+enum vpfe_ipipe_otfdpc_alg {
+	VPFE_IPIPE_OTFDPC_2_0,
+	VPFE_IPIPE_OTFDPC_3_0
+};
+
+struct vpfe_ipipe_otfdpc_2_0_cfg {
+	/* defect detection threshold for MIN_MAX2 method  (DPC 2.0 alg) */
+	struct vpfe_ipipe_otfdpc_thr det_thr;
+	/* defect correction threshold for MIN_MAX2 method (DPC 2.0 alg) or
+	 * maximum value for MIN_MAX method
+	 */
+	struct vpfe_ipipe_otfdpc_thr corr_thr;
+};
+
+struct vpfe_ipipe_otfdpc_3_0_cfg {
+	/* DPC3.0 activity adj shf. activity = (max2-min2) >> (6 -shf)
+	 */
+	unsigned char act_adj_shf;
+	/* DPC3.0 detection threshold, THR */
+	unsigned short det_thr;
+	/* DPC3.0 detection threshold slope, SLP */
+	unsigned short det_slp;
+	/* DPC3.0 detection threshold min, MIN */
+	unsigned short det_thr_min;
+	/* DPC3.0 detection threshold max, MAX */
+	unsigned short det_thr_max;
+	/* DPC3.0 correction threshold, THR */
+	unsigned short corr_thr;
+	/* DPC3.0 correction threshold slope, SLP */
+	unsigned short corr_slp;
+	/* DPC3.0 correction threshold min, MIN */
+	unsigned short corr_thr_min;
+	/* DPC3.0 correction threshold max, MAX */
+	unsigned short corr_thr_max;
+};
+
+struct vpfe_ipipe_otfdpc {
+	/* 0 - disable, 1 - enable */
+	unsigned char en;
+	/* defect detection method */
+	enum vpfe_ipipe_otfdpc_det_meth det_method;
+	/* Algorithm used. Applicable only when IPIPE_DPC_OTF_MIN_MAX2 is
+	 * used
+	 */
+	enum vpfe_ipipe_otfdpc_alg alg;
+	union {
+		/* if alg is IPIPE_OTFDPC_2_0 */
+		struct vpfe_ipipe_otfdpc_2_0_cfg dpc_2_0;
+		/* if alg is IPIPE_OTFDPC_3_0 */
+		struct vpfe_ipipe_otfdpc_3_0_cfg dpc_3_0;
+	} alg_cfg;
+};
+
+/* Threshold values table size */
+#define VPFE_IPIPE_NF_THR_TABLE_SIZE		8
+/* Intensity values table size */
+#define VPFE_IPIPE_NF_STR_TABLE_SIZE		8
+
+/* NF, sampling method for green pixels */
+enum vpfe_ipipe_nf_sampl_meth {
+	/* Same as R or B */
+	VPFE_IPIPE_NF_BOX,
+	/* Diamond mode */
+	VPFE_IPIPE_NF_DIAMOND
+};
+
+/* Structure for configuring NF module */
+struct vpfe_ipipe_nf {
+	/* 0 - disable, 1 - enable */
+	unsigned char en;
+	/* Sampling method for green pixels */
+	enum vpfe_ipipe_nf_sampl_meth gr_sample_meth;
+	/* Down shift value in LUT reference address
+	 */
+	unsigned char shft_val;
+	/* Spread value in NF algorithm
+	 */
+	unsigned char spread_val;
+	/* Apply LSC gain to threshold. Enable this only if
+	 * LSC is enabled in ISIF
+	 */
+	unsigned char apply_lsc_gain;
+	/* Threshold values table */
+	unsigned short thr[VPFE_IPIPE_NF_THR_TABLE_SIZE];
+	/* intensity values table */
+	unsigned char str[VPFE_IPIPE_NF_STR_TABLE_SIZE];
+	/* Edge detection minimum threshold */
+	unsigned short edge_det_min_thr;
+	/* Edge detection maximum threshold */
+	unsigned short edge_det_max_thr;
+};
+
+enum vpfe_ipipe_gic_alg {
+	VPFE_IPIPE_GIC_ALG_CONST_GAIN,
+	VPFE_IPIPE_GIC_ALG_ADAPT_GAIN
+};
+
+enum vpfe_ipipe_gic_thr_sel {
+	VPFE_IPIPE_GIC_THR_REG,
+	VPFE_IPIPE_GIC_THR_NF
+};
+
+enum vpfe_ipipe_gic_wt_fn_type {
+	/* Use difference as index */
+	VPFE_IPIPE_GIC_WT_FN_TYP_DIF,
+	/* Use weight function as index */
+	VPFE_IPIPE_GIC_WT_FN_TYP_HP_VAL
+};
+
+/* structure for Green Imbalance Correction */
+struct vpfe_ipipe_gic {
+	/* 0 - disable, 1 - enable */
+	unsigned char en;
+	/* 0 - Constant gain , 1 - Adaptive gain algorithm */
+	enum vpfe_ipipe_gic_alg gic_alg;
+	/* GIC gain or weight. Used for Constant gain and Adaptive algorithms
+	 */
+	unsigned short gain;
+	/* Threshold selection. GIC register values or NF2 thr table */
+	enum vpfe_ipipe_gic_thr_sel thr_sel;
+	/* thr1. Used when thr_sel is  IPIPE_GIC_THR_REG */
+	unsigned short thr;
+	/* this value is used for thr2-thr1, thr3-thr2 or
+	 * thr4-thr3 when wt_fn_type is index. Otherwise it
+	 * is the
+	 */
+	unsigned short slope;
+	/* Apply LSC gain to threshold. Enable this only if
+	 * LSC is enabled in ISIF & thr_sel is IPIPE_GIC_THR_REG
+	 */
+	unsigned char apply_lsc_gain;
+	/* Multiply Nf2 threshold by this gain. Use this when thr_sel
+	 * is IPIPE_GIC_THR_NF
+	 */
+	struct ipipe_float_u8 nf2_thr_gain;
+	/* Weight function uses difference as index or high pass value.
+	 * Used for adaptive gain algorithm
+	 */
+	enum vpfe_ipipe_gic_wt_fn_type wt_fn_type;
+};
+
+/* Structure for configuring WB module */
+struct vpfe_ipipe_wb {
+	/* Offset (S12) for R */
+	short ofst_r;
+	/* Offset (S12) for Gr */
+	short ofst_gr;
+	/* Offset (S12) for Gb */
+	short ofst_gb;
+	/* Offset (S12) for B */
+	short ofst_b;
+	/* Gain (U13Q9) for Red */
+	struct ipipe_float_u16 gain_r;
+	/* Gain (U13Q9) for Gr */
+	struct ipipe_float_u16 gain_gr;
+	/* Gain (U13Q9) for Gb */
+	struct ipipe_float_u16 gain_gb;
+	/* Gain (U13Q9) for Blue */
+	struct ipipe_float_u16 gain_b;
+};
+
+enum vpfe_ipipe_cfa_alg {
+	/* Algorithm is 2DirAC */
+	VPFE_IPIPE_CFA_ALG_2DIRAC,
+	/* Algorithm is 2DirAC + Digital Antialiasing (DAA) */
+	VPFE_IPIPE_CFA_ALG_2DIRAC_DAA,
+	/* Algorithm is DAA */
+	VPFE_IPIPE_CFA_ALG_DAA
+};
+
+/* Structure for CFA Interpolation */
+struct vpfe_ipipe_cfa {
+	/* 2DirAC or 2DirAC + DAA */
+	enum vpfe_ipipe_cfa_alg alg;
+	/* 2Dir CFA HP value Low Threshold */
+	unsigned short hpf_thr_2dir;
+	/* 2Dir CFA HP value slope */
+	unsigned short hpf_slp_2dir;
+	/* 2Dir CFA HP mix threshold */
+	unsigned short hp_mix_thr_2dir;
+	/* 2Dir CFA HP mix slope */
+	unsigned short hp_mix_slope_2dir;
+	/* 2Dir Direction threshold */
+	unsigned short dir_thr_2dir;
+	/* 2Dir Direction slope */
+	unsigned short dir_slope_2dir;
+	/* 2Dir Non Directional Weight */
+	unsigned short nd_wt_2dir;
+	/* DAA Mono Hue Fraction */
+	unsigned short hue_fract_daa;
+	/* DAA Mono Edge threshold */
+	unsigned short edge_thr_daa;
+	/* DAA Mono threshold minimum */
+	unsigned short thr_min_daa;
+	/* DAA Mono threshold slope */
+	unsigned short thr_slope_daa;
+	/* DAA Mono slope minimum */
+	unsigned short slope_min_daa;
+	/* DAA Mono slope slope */
+	unsigned short slope_slope_daa;
+	/* DAA Mono LP wight */
+	unsigned short lp_wt_daa;
+};
+
+/* Struct for configuring RGB2RGB blending module */
+struct vpfe_ipipe_rgb2rgb {
+	/* Matrix coefficient for RR S12Q8 for ID = 1 and S11Q8 for ID = 2 */
+	struct ipipe_float_s16 coef_rr;
+	/* Matrix coefficient for GR S12Q8/S11Q8 */
+	struct ipipe_float_s16 coef_gr;
+	/* Matrix coefficient for BR S12Q8/S11Q8 */
+	struct ipipe_float_s16 coef_br;
+	/* Matrix coefficient for RG S12Q8/S11Q8 */
+	struct ipipe_float_s16 coef_rg;
+	/* Matrix coefficient for GG S12Q8/S11Q8 */
+	struct ipipe_float_s16 coef_gg;
+	/* Matrix coefficient for BG S12Q8/S11Q8 */
+	struct ipipe_float_s16 coef_bg;
+	/* Matrix coefficient for RB S12Q8/S11Q8 */
+	struct ipipe_float_s16 coef_rb;
+	/* Matrix coefficient for GB S12Q8/S11Q8 */
+	struct ipipe_float_s16 coef_gb;
+	/* Matrix coefficient for BB S12Q8/S11Q8 */
+	struct ipipe_float_s16 coef_bb;
+	/* Output offset for R S13/S11 */
+	int out_ofst_r;
+	/* Output offset for G S13/S11 */
+	int out_ofst_g;
+	/* Output offset for B S13/S11 */
+	int out_ofst_b;
+};
+
+#define VPFE_IPIPE_MAX_SIZE_GAMMA		512
+
+enum vpfe_ipipe_gamma_tbl_size {
+	VPFE_IPIPE_GAMMA_TBL_SZ_64 = 64,
+	VPFE_IPIPE_GAMMA_TBL_SZ_128 = 128,
+	VPFE_IPIPE_GAMMA_TBL_SZ_256 = 256,
+	VPFE_IPIPE_GAMMA_TBL_SZ_512 = 512,
+};
+
+enum vpfe_ipipe_gamma_tbl_sel {
+	VPFE_IPIPE_GAMMA_TBL_RAM = 0,
+	VPFE_IPIPE_GAMMA_TBL_ROM = 1,
+};
+
+struct vpfe_ipipe_gamma_entry {
+	/* 10 bit slope */
+	short slope;
+	/* 10 bit offset */
+	unsigned short offset;
+};
+
+/* Structure for configuring Gamma correction module */
+struct vpfe_ipipe_gamma {
+	/* 0 - Enable Gamma correction for Red
+	 * 1 - bypass Gamma correction. Data is divided by 16
+	 */
+	unsigned char bypass_r;
+	/* 0 - Enable Gamma correction for Blue
+	 * 1 - bypass Gamma correction. Data is divided by 16
+	 */
+	unsigned char bypass_b;
+	/* 0 - Enable Gamma correction for Green
+	 * 1 - bypass Gamma correction. Data is divided by 16
+	 */
+	unsigned char bypass_g;
+	/* IPIPE_GAMMA_TBL_RAM or IPIPE_GAMMA_TBL_ROM */
+	enum vpfe_ipipe_gamma_tbl_sel tbl_sel;
+	/* Table size for RAM gamma table.
+	 */
+	enum vpfe_ipipe_gamma_tbl_size tbl_size;
+	/* R table */
+	struct vpfe_ipipe_gamma_entry table_r[VPFE_IPIPE_MAX_SIZE_GAMMA];
+	/* Blue table */
+	struct vpfe_ipipe_gamma_entry table_b[VPFE_IPIPE_MAX_SIZE_GAMMA];
+	/* Green table */
+	struct vpfe_ipipe_gamma_entry table_g[VPFE_IPIPE_MAX_SIZE_GAMMA];
+};
+
+#define VPFE_IPIPE_MAX_SIZE_3D_LUT		729
+
+struct vpfe_ipipe_3d_lut_entry {
+	/* 10 bit entry for red */
+	unsigned short r;
+	/* 10 bit entry for green */
+	unsigned short g;
+	/* 10 bit entry for blue */
+	unsigned short b;
+};
+
+/* structure for 3D-LUT */
+struct vpfe_ipipe_3d_lut {
+	/* enable/disable 3D lut */
+	unsigned char en;
+	/* 3D - LUT table entry */
+	struct vpfe_ipipe_3d_lut_entry table[VPFE_IPIPE_MAX_SIZE_3D_LUT];
+};
+
+/* Struct for configuring rgb2ycbcr module */
+struct vpfe_ipipe_rgb2yuv {
+	/* Matrix coefficient for RY S12Q8 */
+	struct ipipe_float_s16 coef_ry;
+	/* Matrix coefficient for GY S12Q8 */
+	struct ipipe_float_s16 coef_gy;
+	/* Matrix coefficient for BY S12Q8 */
+	struct ipipe_float_s16 coef_by;
+	/* Matrix coefficient for RCb S12Q8 */
+	struct ipipe_float_s16 coef_rcb;
+	/* Matrix coefficient for GCb S12Q8 */
+	struct ipipe_float_s16 coef_gcb;
+	/* Matrix coefficient for BCb S12Q8 */
+	struct ipipe_float_s16 coef_bcb;
+	/* Matrix coefficient for RCr S12Q8 */
+	struct ipipe_float_s16 coef_rcr;
+	/* Matrix coefficient for GCr S12Q8 */
+	struct ipipe_float_s16 coef_gcr;
+	/* Matrix coefficient for BCr S12Q8 */
+	struct ipipe_float_s16 coef_bcr;
+	/* Output offset for R S11 */
+	int out_ofst_y;
+	/* Output offset for Cb S11 */
+	int out_ofst_cb;
+	/* Output offset for Cr S11 */
+	int out_ofst_cr;
+};
+
+enum vpfe_ipipe_gbce_type {
+	VPFE_IPIPE_GBCE_Y_VAL_TBL = 0,
+	VPFE_IPIPE_GBCE_GAIN_TBL = 1,
+};
+
+#define VPFE_IPIPE_MAX_SIZE_GBCE_LUT		1024
+
+/* structure for Global brightness and Contrast */
+struct vpfe_ipipe_gbce {
+	/* enable/disable GBCE */
+	unsigned char en;
+	/* Y - value table or Gain table */
+	enum vpfe_ipipe_gbce_type type;
+	/* ptr to LUT for GBCE with 1024 entries */
+	unsigned short table[VPFE_IPIPE_MAX_SIZE_GBCE_LUT];
+};
+
+/* Chrominance position. Applicable only for YCbCr input
+ * Applied after edge enhancement
+ */
+enum vpfe_chr_pos {
+	/* Co-siting, same position with luminance */
+	VPFE_IPIPE_YUV422_CHR_POS_COSITE = 0,
+	/* Centering, In the middle of luminance */
+	VPFE_IPIPE_YUV422_CHR_POS_CENTRE = 1,
+};
+
+/* Structure for configuring yuv422 conversion module */
+struct vpfe_ipipe_yuv422_conv {
+	/* Max Chrominance value */
+	unsigned char en_chrom_lpf;
+	/* 1 - enable LPF for chrminance, 0 - disable */
+	enum vpfe_chr_pos chrom_pos;
+};
+
+#define VPFE_IPIPE_MAX_SIZE_YEE_LUT		1024
+
+enum vpfe_ipipe_yee_merge_meth {
+	VPFE_IPIPE_YEE_ABS_MAX = 0,
+	VPFE_IPIPE_YEE_EE_ES = 1,
+};
+
+/* Structure for configuring YUV Edge Enhancement module */
+struct vpfe_ipipe_yee {
+	/* 1 - enable enhancement, 0 - disable */
+	unsigned char en;
+	/* enable/disable halo reduction in edge sharpner */
+	unsigned char en_halo_red;
+	/* Merge method between Edge Enhancer and Edge sharpner */
+	enum vpfe_ipipe_yee_merge_meth merge_meth;
+	/* HPF Shift length */
+	unsigned char hpf_shft;
+	/* HPF Coefficient 00, S10 */
+	short hpf_coef_00;
+	/* HPF Coefficient 01, S10 */
+	short hpf_coef_01;
+	/* HPF Coefficient 02, S10 */
+	short hpf_coef_02;
+	/* HPF Coefficient 10, S10 */
+	short hpf_coef_10;
+	/* HPF Coefficient 11, S10 */
+	short hpf_coef_11;
+	/* HPF Coefficient 12, S10 */
+	short hpf_coef_12;
+	/* HPF Coefficient 20, S10 */
+	short hpf_coef_20;
+	/* HPF Coefficient 21, S10 */
+	short hpf_coef_21;
+	/* HPF Coefficient 22, S10 */
+	short hpf_coef_22;
+	/* Lower threshold before referring to LUT */
+	unsigned short yee_thr;
+	/* Edge sharpener Gain */
+	unsigned short es_gain;
+	/* Edge sharpener lower threshold */
+	unsigned short es_thr1;
+	/* Edge sharpener upper threshold */
+	unsigned short es_thr2;
+	/* Edge sharpener gain on gradient */
+	unsigned short es_gain_grad;
+	/* Edge sharpener offset on gradient */
+	unsigned short es_ofst_grad;
+	/* Ptr to EE table. Must have 1024 entries */
+	short table[VPFE_IPIPE_MAX_SIZE_YEE_LUT];
+};
+
+enum vpfe_ipipe_car_meth {
+	/* Chromatic Gain Control */
+	VPFE_IPIPE_CAR_CHR_GAIN_CTRL = 0,
+	/* Dynamic switching between CHR_GAIN_CTRL
+	 * and MED_FLTR
+	 */
+	VPFE_IPIPE_CAR_DYN_SWITCH = 1,
+	/* Median Filter */
+	VPFE_IPIPE_CAR_MED_FLTR = 2,
+};
+
+enum vpfe_ipipe_car_hpf_type {
+	VPFE_IPIPE_CAR_HPF_Y = 0,
+	VPFE_IPIPE_CAR_HPF_H = 1,
+	VPFE_IPIPE_CAR_HPF_V = 2,
+	VPFE_IPIPE_CAR_HPF_2D = 3,
+	/* 2D HPF from YUV Edge Enhancement */
+	VPFE_IPIPE_CAR_HPF_2D_YEE = 4,
+};
+
+struct vpfe_ipipe_car_gain {
+	/* csup_gain */
+	unsigned char gain;
+	/* csup_shf. */
+	unsigned char shft;
+	/* gain minimum */
+	unsigned short gain_min;
+};
+
+/* Structure for Chromatic Artifact Reduction */
+struct vpfe_ipipe_car {
+	/* enable/disable */
+	unsigned char en;
+	/* Gain control or Dynamic switching */
+	enum vpfe_ipipe_car_meth meth;
+	/* Gain1 function configuration for Gain control */
+	struct vpfe_ipipe_car_gain gain1;
+	/* Gain2 function configuration for Gain control */
+	struct vpfe_ipipe_car_gain gain2;
+	/* HPF type used for CAR */
+	enum vpfe_ipipe_car_hpf_type hpf;
+	/* csup_thr: HPF threshold for Gain control */
+	unsigned char hpf_thr;
+	/* Down shift value for hpf. 2 bits */
+	unsigned char hpf_shft;
+	/* switch limit for median filter */
+	unsigned char sw0;
+	/* switch coefficient for Gain control */
+	unsigned char sw1;
+};
+
+/* structure for Chromatic Gain Suppression */
+struct vpfe_ipipe_cgs {
+	/* enable/disable */
+	unsigned char en;
+	/* gain1 bright side threshold */
+	unsigned char h_thr;
+	/* gain1 bright side slope */
+	unsigned char h_slope;
+	/* gain1 down shift value for bright side */
+	unsigned char h_shft;
+	/* gain1 bright side minimum gain */
+	unsigned char h_min;
+};
+
+/* Max pixels allowed in the input. If above this either decimation
+ * or frame division mode to be enabled
+ */
+#define VPFE_IPIPE_MAX_INPUT_WIDTH	2600
+
+struct vpfe_ipipe_input_config {
+	unsigned int vst;
+	unsigned int hst;
+};
+
+/**
+ * struct vpfe_ipipe_config - IPIPE engine configuration (user)
+ * @input_config: Pointer to structure for ipipe configuration.
+ * @flag: Specifies which ISP IPIPE functions should be enabled.
+ * @lutdpc: Pointer to luma enhancement structure.
+ * @otfdpc: Pointer to structure for defect correction.
+ * @nf1: Pointer to structure for Noise Filter.
+ * @nf2: Pointer to structure for Noise Filter.
+ * @gic: Pointer to structure for Green Imbalance.
+ * @wbal: Pointer to structure for White Balance.
+ * @cfa: Pointer to structure containing the CFA interpolation.
+ * @rgb2rgb1: Pointer to structure for RGB to RGB Blending.
+ * @rgb2rgb2: Pointer to structure for RGB to RGB Blending.
+ * @gamma: Pointer to gamma structure.
+ * @lut: Pointer to structure for 3D LUT.
+ * @rgb2yuv: Pointer to structure for RGB-YCbCr conversion.
+ * @gbce: Pointer to structure for Global Brightness,Contrast Control.
+ * @yuv422_conv: Pointer to structure for YUV 422 conversion.
+ * @yee: Pointer to structure for Edge Enhancer.
+ * @car: Pointer to structure for Chromatic Artifact Reduction.
+ * @cgs: Pointer to structure for Chromatic Gain Suppression.
+ */
+struct vpfe_ipipe_config {
+	__u32 flag;
+	struct vpfe_ipipe_input_config __user *input_config;
+	struct vpfe_ipipe_lutdpc __user *lutdpc;
+	struct vpfe_ipipe_otfdpc __user *otfdpc;
+	struct vpfe_ipipe_nf __user *nf1;
+	struct vpfe_ipipe_nf __user *nf2;
+	struct vpfe_ipipe_gic __user *gic;
+	struct vpfe_ipipe_wb __user *wbal;
+	struct vpfe_ipipe_cfa __user *cfa;
+	struct vpfe_ipipe_rgb2rgb __user *rgb2rgb1;
+	struct vpfe_ipipe_rgb2rgb __user *rgb2rgb2;
+	struct vpfe_ipipe_gamma __user *gamma;
+	struct vpfe_ipipe_3d_lut __user *lut;
+	struct vpfe_ipipe_rgb2yuv __user *rgb2yuv;
+	struct vpfe_ipipe_gbce __user *gbce;
+	struct vpfe_ipipe_yuv422_conv __user *yuv422_conv;
+	struct vpfe_ipipe_yee __user *yee;
+	struct vpfe_ipipe_car __user *car;
+	struct vpfe_ipipe_cgs __user *cgs;
+};
+
+/*******************************************************************
+**  Resizer API structures
+*******************************************************************/
+/* Interpolation types used for horizontal rescale */
+enum vpfe_rsz_intp_t {
+	VPFE_RSZ_INTP_CUBIC,
+	VPFE_RSZ_INTP_LINEAR
+};
+
+/* Horizontal LPF intensity selection */
+enum vpfe_rsz_h_lpf_lse_t {
+	VPFE_RSZ_H_LPF_LSE_INTERN,
+	VPFE_RSZ_H_LPF_LSE_USER_VAL
+};
+
+enum vpfe_rsz_down_scale_ave_sz {
+	VPFE_IPIPE_DWN_SCALE_1_OVER_2,
+	VPFE_IPIPE_DWN_SCALE_1_OVER_4,
+	VPFE_IPIPE_DWN_SCALE_1_OVER_8,
+	VPFE_IPIPE_DWN_SCALE_1_OVER_16,
+	VPFE_IPIPE_DWN_SCALE_1_OVER_32,
+	VPFE_IPIPE_DWN_SCALE_1_OVER_64,
+	VPFE_IPIPE_DWN_SCALE_1_OVER_128,
+	VPFE_IPIPE_DWN_SCALE_1_OVER_256
+};
+
+struct vpfe_rsz_output_spec {
+	/* enable horizontal flip */
+	unsigned char h_flip;
+	/* enable vertical flip */
+	unsigned char v_flip;
+	/* line start offset for y. */
+	unsigned int vst_y;
+	/* line start offset for c. Only for 420 */
+	unsigned int vst_c;
+	/* vertical rescale interpolation type, YCbCr or Luminance */
+	enum vpfe_rsz_intp_t v_typ_y;
+	/* vertical rescale interpolation type for Chrominance */
+	enum vpfe_rsz_intp_t v_typ_c;
+	/* vertical lpf intensity - Luminance */
+	unsigned char v_lpf_int_y;
+	/* vertical lpf intensity - Chrominance */
+	unsigned char v_lpf_int_c;
+	/* horizontal rescale interpolation types, YCbCr or Luminance  */
+	enum vpfe_rsz_intp_t h_typ_y;
+	/* horizontal rescale interpolation types, Chrominance */
+	enum vpfe_rsz_intp_t h_typ_c;
+	/* horizontal lpf intensity - Luminance */
+	unsigned char h_lpf_int_y;
+	/* horizontal lpf intensity - Chrominance */
+	unsigned char h_lpf_int_c;
+	/* Use down scale mode for scale down */
+	unsigned char en_down_scale;
+	/* if downscale, set the downscale more average size for horizontal
+	 * direction. Used only if output width and height is less than
+	 * input sizes
+	 */
+	enum vpfe_rsz_down_scale_ave_sz h_dscale_ave_sz;
+	/* if downscale, set the downscale more average size for vertical
+	 * direction. Used only if output width and height is less than
+	 * input sizes
+	 */
+	enum vpfe_rsz_down_scale_ave_sz v_dscale_ave_sz;
+	/* Y offset. If set, the offset would be added to the base address
+	 */
+	unsigned int user_y_ofst;
+	/* C offset. If set, the offset would be added to the base address
+	 */
+	unsigned int user_c_ofst;
+};
+
+struct vpfe_rsz_config_params {
+	unsigned int vst;
+	/* horizontal start position of the image
+	 * data to IPIPE
+	 */
+	unsigned int hst;
+	/* output spec of the image data coming out of resizer - 0(UYVY).
+	 */
+	struct vpfe_rsz_output_spec output1;
+	/* output spec of the image data coming out of resizer - 1(UYVY).
+	 */
+	struct vpfe_rsz_output_spec output2;
+	/* 0 , chroma sample at odd pixel, 1 - even pixel */
+	unsigned char chroma_sample_even;
+	unsigned char frame_div_mode_en;
+	unsigned char yuv_y_min;
+	unsigned char yuv_y_max;
+	unsigned char yuv_c_min;
+	unsigned char yuv_c_max;
+	enum vpfe_chr_pos out_chr_pos;
+	unsigned char bypass;
+};
+
+/* Structure for VIDIOC_VPFE_RSZ_[S/G]_CONFIG IOCTLs */
+struct vpfe_rsz_config {
+	struct vpfe_rsz_config_params *config;
+};
+
+#endif		/* _DAVINCI_VPFE_USER_H */
