| Message ID | 1362401955-9616-5-git-send-email-prakash.pm@ti.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
On Mon, Mar 04, 2013 at 18:29:15, Manjunathappa, Prakash wrote: > Enable m25p64 SPI flash support on da850-EVM. Also > add partition information of SPI flash. > > Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> > --- > Since v1: > Look for m25p64 instead of m25p80. > Corrected the filesystem partition information. > > arch/arm/boot/dts/da850-evm.dts | 40 +++++++++++++++++++++++++++++++++++++++ > 1 files changed, 40 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts > index c359872..3306d82 100644 > --- a/arch/arm/boot/dts/da850-evm.dts > +++ b/arch/arm/boot/dts/da850-evm.dts > @@ -41,6 +41,46 @@ > wdt: wdt@1c21000 { > status = "okay"; > }; > + spi1: spi@1f0e000 { > + status = "okay"; > + pinctrl-names = "default"; > + pinctrl-0 = <&spi1_pins>; > + flash: m25p80@0 { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "m25p64"; > + spi-max-frequency = <30000000>; > + reg = <0>; > + partition@0 { > + label = "U-Boot-SPL"; > + reg = <0x00000000 0x00010000>; > + read-only; > + }; > + partition@1 { > + label = "U-Boot"; > + reg = <0x00010000 0x00080000>; > + read-only; > + }; > + partition@2 { > + label = "U-Boot-Env"; > + reg = <0x00090000 0x00010000>; > + read-only; > + }; > + partition@3 { > + label = "Kernel"; > + reg = <0x000a0000 0x00280000>; > + }; > + partition@4 { > + label = "Filesystem"; > + reg = <0x00320000 0x00400000>; > + }; > + partition@5 { > + label = "MAC-Address"; > + reg = <0x00720000 0x00010000>; Ah... MAC address is at the end of 8MB flash. Need to change above: reg = <0x007f0000 0x00010000>; Will send v3 for this. Thanks, Prakash > + read-only; > + }; > + }; > + }; > }; > nand_cs3@62000000 { > status = "okay"; > -- > 1.7.4.1 > >
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index c359872..3306d82 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -41,6 +41,46 @@ wdt: wdt@1c21000 { status = "okay"; }; + spi1: spi@1f0e000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64"; + spi-max-frequency = <30000000>; + reg = <0>; + partition@0 { + label = "U-Boot-SPL"; + reg = <0x00000000 0x00010000>; + read-only; + }; + partition@1 { + label = "U-Boot"; + reg = <0x00010000 0x00080000>; + read-only; + }; + partition@2 { + label = "U-Boot-Env"; + reg = <0x00090000 0x00010000>; + read-only; + }; + partition@3 { + label = "Kernel"; + reg = <0x000a0000 0x00280000>; + }; + partition@4 { + label = "Filesystem"; + reg = <0x00320000 0x00400000>; + }; + partition@5 { + label = "MAC-Address"; + reg = <0x00720000 0x00010000>; + read-only; + }; + }; + }; }; nand_cs3@62000000 { status = "okay";
Enable m25p64 SPI flash support on da850-EVM. Also add partition information of SPI flash. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> --- Since v1: Look for m25p64 instead of m25p80. Corrected the filesystem partition information. arch/arm/boot/dts/da850-evm.dts | 40 +++++++++++++++++++++++++++++++++++++++ 1 files changed, 40 insertions(+), 0 deletions(-)