diff mbox

[v5,1/2] ARM: davinci: dm355: add support for v4l2 video display

Message ID 1363429052-1081-2-git-send-email-prabhakar.csengg@gmail.com (mailing list archive)
State Changes Requested
Headers show

Commit Message

Prabhakar March 16, 2013, 10:17 a.m. UTC
From: Lad, Prabhakar <prabhakar.csengg@gmail.com>

Create platform devices for various video modules like venc,osd,
vpbe and v4l2 driver for dm355.

Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
---
 arch/arm/mach-davinci/board-dm355-evm.c |    4 +-
 arch/arm/mach-davinci/davinci.h         |    2 +-
 arch/arm/mach-davinci/dm355.c           |  202 +++++++++++++++++++++++++++++--
 3 files changed, 197 insertions(+), 11 deletions(-)

Comments

Sekhar Nori March 18, 2013, 8:41 a.m. UTC | #1
On 3/16/2013 3:47 PM, Prabhakar lad wrote:
> From: Lad, Prabhakar <prabhakar.csengg@gmail.com>
> 
> Create platform devices for various video modules like venc,osd,
> vpbe and v4l2 driver for dm355.
> 
> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>

Comments on the DM365 series apply to this one too. In addition:

> +static int dm355_vpbe_setup_pinmux(enum v4l2_mbus_pixelcode if_type,
> +			    int field)
>  {
> -	vpfe_capture_dev.dev.platform_data = cfg;
> +	switch (if_type) {
> +	case V4L2_MBUS_FMT_SGRBG8_1X8:
> +		davinci_cfg_reg(DM355_VOUT_FIELD_G70);
> +		break;
> +
> +	case V4L2_MBUS_FMT_YUYV10_1X20:
> +		/*
> +		 * This was VPBE_DIGITAL_IF_YCC16. Replace the enum

"was VPBE_DIGITAL_IF_YCC16" when? This is the first time this code is
getting in.

> +		 * accordingly when the right one gets into open source

What is the "right one"? And "open source" == kernel? Then may be just
call it that.

> +		 */
> +		if (field)
> +			davinci_cfg_reg(DM355_VOUT_FIELD);
> +		else
> +			davinci_cfg_reg(DM355_VOUT_FIELD_G70);
> +		break;
> +
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	davinci_cfg_reg(DM355_VOUT_COUTL_EN);
> +	davinci_cfg_reg(DM355_VOUT_COUTH_EN);
> +
> +	return 0;
>  }
>  
> +static inline u32 dm355_reg_modify(void *reg, u32 val, u32 mask)
> +{
> +	u32 new_val = (readl(reg) & ~mask) | (val & mask);
> +
> +	writel(new_val, reg);
> +
> +	return new_val;
> +}

This function needs to be removed.

Thanks,
Sekhar
Prabhakar March 18, 2013, 9:09 a.m. UTC | #2
Sekhar,

On Mon, Mar 18, 2013 at 2:11 PM, Sekhar Nori <nsekhar@ti.com> wrote:
> On 3/16/2013 3:47 PM, Prabhakar lad wrote:
>> From: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>>
>> Create platform devices for various video modules like venc,osd,
>> vpbe and v4l2 driver for dm355.
>>
>> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
>
> Comments on the DM365 series apply to this one too. In addition:
>
OK.

>> +static int dm355_vpbe_setup_pinmux(enum v4l2_mbus_pixelcode if_type,
>> +                         int field)
>>  {
>> -     vpfe_capture_dev.dev.platform_data = cfg;
>> +     switch (if_type) {
>> +     case V4L2_MBUS_FMT_SGRBG8_1X8:
>> +             davinci_cfg_reg(DM355_VOUT_FIELD_G70);
>> +             break;
>> +
>> +     case V4L2_MBUS_FMT_YUYV10_1X20:
>> +             /*
>> +              * This was VPBE_DIGITAL_IF_YCC16. Replace the enum
>
> "was VPBE_DIGITAL_IF_YCC16" when? This is the first time this code is
> getting in.
>
>> +              * accordingly when the right one gets into open source
>
> What is the "right one"? And "open source" == kernel? Then may be just
> call it that.
>
Ah this comment doesn't make any sense ' V4L2_MBUS_FMT_YUYV10_1X20'
is the correct one itself. I'll remove this comment.

>> +              */
>> +             if (field)
>> +                     davinci_cfg_reg(DM355_VOUT_FIELD);
>> +             else
>> +                     davinci_cfg_reg(DM355_VOUT_FIELD_G70);
>> +             break;
>> +
>> +     default:
>> +             return -EINVAL;
>> +     }
>> +
>> +     davinci_cfg_reg(DM355_VOUT_COUTL_EN);
>> +     davinci_cfg_reg(DM355_VOUT_COUTH_EN);
>> +
>> +     return 0;
>>  }
>>
>> +static inline u32 dm355_reg_modify(void *reg, u32 val, u32 mask)
>> +{
>> +     u32 new_val = (readl(reg) & ~mask) | (val & mask);
>> +
>> +     writel(new_val, reg);
>> +
>> +     return new_val;
>> +}
>
> This function needs to be removed.
>
Ah missed, I wonder how the compiler didn't catch it!

Regards,
--Prabhakar

> Thanks,
> Sekhar
diff mbox

Patch

diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 147b8e1..37d12cc 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -253,8 +253,6 @@  static struct davinci_uart_config uart_config __initdata = {
 
 static void __init dm355_evm_map_io(void)
 {
-	/* setup input configuration for VPFE input devices */
-	dm355_set_vpfe_config(&vpfe_cfg);
 	dm355_init();
 }
 
@@ -344,6 +342,8 @@  static __init void dm355_evm_init(void)
 	davinci_setup_mmc(0, &dm355evm_mmc_config);
 	davinci_setup_mmc(1, &dm355evm_mmc_config);
 
+	dm355_init_video(&vpfe_cfg, NULL);
+
 	dm355_init_spi0(BIT(0), dm355_evm_spi_info,
 			ARRAY_SIZE(dm355_evm_spi_info));
 
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index 1c2670f..acfe0bb 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -74,7 +74,7 @@  void __init dm355_init(void);
 void dm355_init_spi0(unsigned chipselect_mask,
 		const struct spi_board_info *info, unsigned len);
 void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata);
-void dm355_set_vpfe_config(struct vpfe_config *cfg);
+int __init dm355_init_video(struct vpfe_config *, struct vpbe_config *);
 
 /* DM365 function declarations */
 void __init dm365_init(void);
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index b49c3b7..761fcba 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -36,6 +36,17 @@ 
 
 #define DM355_UART2_BASE	(IO_PHYS + 0x206000)
 
+#define DM3XX_VDAC_CONFIG_BASE		0x01c4002c
+
+#define DM355_OSD_BASE			0x01c70200
+
+#define DM355_VENC_BASE			0x01c70400
+
+#define DM355_VPSS_CLK_CTRL_ADDR		0x44
+#define DM355_VPSS_MUXSEL_EXTCLK_ENABLE		BIT(1)
+#define DM355_VPSS_VENCCLKEN_ENABLE		BIT(3)
+#define DM355_VPSS_DACCLKEN_ENABLE		BIT(4)
+
 /*
  * Device specific clocks
  */
@@ -744,11 +755,165 @@  static struct platform_device vpfe_capture_dev = {
 	},
 };
 
-void dm355_set_vpfe_config(struct vpfe_config *cfg)
+static struct resource dm355_osd_resources[] = {
+	{
+		.start	= DM355_OSD_BASE,
+		.end	= DM355_OSD_BASE + 0x180,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dm355_osd_dev = {
+	.name		= DM355_VPBE_OSD_SUBDEV_NAME,
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm355_osd_resources),
+	.resource	= dm355_osd_resources,
+	.dev		= {
+		.dma_mask		= &vpfe_capture_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+static struct resource dm355_venc_resources[] = {
+	{
+		.start	= IRQ_VENCINT,
+		.end	= IRQ_VENCINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* venc registers io space */
+	{
+		.start	= DM355_VENC_BASE,
+		.end	= DM355_VENC_BASE + 0x180,
+		.flags	= IORESOURCE_MEM,
+	},
+	/* VDAC config register io space */
+	{
+		.start	= DM3XX_VDAC_CONFIG_BASE,
+		.end	= DM3XX_VDAC_CONFIG_BASE + 4,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct resource dm355_v4l2_disp_resources[] = {
+	{
+		.start	= IRQ_VENCINT,
+		.end	= IRQ_VENCINT,
+		.flags	= IORESOURCE_IRQ,
+	},
+	/* venc registers io space */
+	{
+		.start	= DM355_VENC_BASE,
+		.end	= DM355_VENC_BASE + 0x180,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static int dm355_vpbe_setup_pinmux(enum v4l2_mbus_pixelcode if_type,
+			    int field)
 {
-	vpfe_capture_dev.dev.platform_data = cfg;
+	switch (if_type) {
+	case V4L2_MBUS_FMT_SGRBG8_1X8:
+		davinci_cfg_reg(DM355_VOUT_FIELD_G70);
+		break;
+
+	case V4L2_MBUS_FMT_YUYV10_1X20:
+		/*
+		 * This was VPBE_DIGITAL_IF_YCC16. Replace the enum
+		 * accordingly when the right one gets into open source
+		 */
+		if (field)
+			davinci_cfg_reg(DM355_VOUT_FIELD);
+		else
+			davinci_cfg_reg(DM355_VOUT_FIELD_G70);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	davinci_cfg_reg(DM355_VOUT_COUTL_EN);
+	davinci_cfg_reg(DM355_VOUT_COUTH_EN);
+
+	return 0;
 }
 
+static inline u32 dm355_reg_modify(void *reg, u32 val, u32 mask)
+{
+	u32 new_val = (readl(reg) & ~mask) | (val & mask);
+
+	writel(new_val, reg);
+
+	return new_val;
+}
+
+static int dm355_venc_setup_clock(enum vpbe_enc_timings_type type,
+				   unsigned int pclock)
+{
+	void __iomem *vpss_clk_ctrl_reg;
+
+	vpss_clk_ctrl_reg = DAVINCI_SYSMOD_VIRT(DM355_VPSS_CLK_CTRL_ADDR);
+
+	switch (type) {
+	case VPBE_ENC_STD:
+		vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 0);
+		writel(DM355_VPSS_DACCLKEN_ENABLE |
+		       DM355_VPSS_VENCCLKEN_ENABLE, vpss_clk_ctrl_reg);
+		break;
+
+	case VPBE_ENC_DV_TIMINGS:
+		if (pclock > 27000000)
+			/*
+			 * For HD, use external clock source since we cannot
+			 * support HD mode with internal clocks.
+			 */
+			writel(DM355_VPSS_MUXSEL_EXTCLK_ENABLE,
+			       vpss_clk_ctrl_reg);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct platform_device dm355_vpbe_display = {
+	.name		= "vpbe-v4l2",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm355_v4l2_disp_resources),
+	.resource	= dm355_v4l2_disp_resources,
+	.dev		= {
+		.dma_mask		= &vpfe_capture_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+struct venc_platform_data dm355_venc_pdata = {
+	.setup_pinmux	= dm355_vpbe_setup_pinmux,
+	.setup_clock	= dm355_venc_setup_clock,
+};
+
+static struct platform_device dm355_venc_dev = {
+	.name		= DM355_VPBE_VENC_SUBDEV_NAME,
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(dm355_venc_resources),
+	.resource	= dm355_venc_resources,
+	.dev		= {
+		.dma_mask		= &vpfe_capture_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= (void *)&dm355_venc_pdata,
+	},
+};
+
+static struct platform_device dm355_vpbe_dev = {
+	.name		= "vpbe_controller",
+	.id		= -1,
+	.dev		= {
+		.dma_mask		= &vpfe_capture_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm355_io_desc[] = {
@@ -868,19 +1033,40 @@  void __init dm355_init(void)
 	davinci_map_sysmod();
 }
 
+int __init dm355_init_video(struct vpfe_config *vpfe_cfg,
+				struct vpbe_config *vpbe_cfg)
+{
+	if (vpfe_cfg || vpbe_cfg)
+		platform_device_register(&dm355_vpss_device);
+
+	if (vpfe_cfg) {
+		/* Add ccdc clock aliases */
+		clk_add_alias("master", dm355_ccdc_dev.name,
+			      "vpss_master", NULL);
+		clk_add_alias("slave", dm355_ccdc_dev.name, "vpss_slave", NULL);
+		vpfe_capture_dev.dev.platform_data = vpfe_cfg;
+		platform_device_register(&dm355_ccdc_dev);
+		platform_device_register(&vpfe_capture_dev);
+	}
+
+	if (vpbe_cfg) {
+		dm355_vpbe_dev.dev.platform_data = vpbe_cfg;
+		platform_device_register(&dm355_osd_dev);
+		platform_device_register(&dm355_venc_dev);
+		platform_device_register(&dm355_vpbe_dev);
+		platform_device_register(&dm355_vpbe_display);
+	}
+
+	return 0;
+}
+
 static int __init dm355_init_devices(void)
 {
 	if (!cpu_is_davinci_dm355())
 		return 0;
 
-	/* Add ccdc clock aliases */
-	clk_add_alias("master", dm355_ccdc_dev.name, "vpss_master", NULL);
-	clk_add_alias("slave", dm355_ccdc_dev.name, "vpss_master", NULL);
 	davinci_cfg_reg(DM355_INT_EDMA_CC);
 	platform_device_register(&dm355_edma_device);
-	platform_device_register(&dm355_vpss_device);
-	platform_device_register(&dm355_ccdc_dev);
-	platform_device_register(&vpfe_capture_dev);
 
 	return 0;
 }