@@ -22,17 +22,19 @@
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/gpio-davinci.h>
+#include <linux/platform_data/usb-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+#include <linux/platform_data/spi-davinci.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/cp_intc.h>
#include <mach/mux.h>
-#include <linux/platform_data/mtd-davinci.h>
+#include <mach/common.h>
#include <mach/da8xx.h>
-#include <linux/platform_data/usb-davinci.h>
-#include <linux/platform_data/mtd-davinci-aemif.h>
-#include <linux/platform_data/spi-davinci.h>
#define DA830_EVM_PHY_ID ""
/*
@@ -590,11 +592,20 @@ static struct spi_board_info da830evm_spi_info[] = {
},
};
+static struct davinci_gpio_platform_data da830_gpio_platform_data = {
+ .ngpio = 128,
+ .intc_irq_num = DA830_N_CP_INTC_IRQ,
+};
+
static __init void da830_evm_init(void)
{
struct davinci_soc_info *soc_info = &davinci_soc_info;
int ret;
+ ret = da8xx_register_gpio(&da830_gpio_platform_data);
+ if (ret)
+ pr_warn("da830_evm_init: GPIO init failed: %d\n", ret);
+
ret = da830_register_edma(da830_edma_rsv);
if (ret)
pr_warning("da830_evm_init: edma registration failed: %d\n",
@@ -28,6 +28,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/gpio-davinci.h>
#include <linux/platform_data/mtd-davinci.h>
#include <linux/platform_data/mtd-davinci-aemif.h>
#include <linux/platform_data/spi-davinci.h>
@@ -42,6 +43,7 @@
#include <mach/da8xx.h>
#include <mach/mux.h>
#include <mach/sram.h>
+#include <mach/common.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -1138,6 +1140,11 @@ static struct edma_rsv_info *da850_edma_rsv[2] = {
&da850_edma_cc1_rsv,
};
+static struct davinci_gpio_platform_data da850_gpio_platform_data = {
+ .ngpio = 144,
+ .intc_irq_num = DA850_N_CP_INTC_IRQ,
+};
+
#ifdef CONFIG_CPU_FREQ
static __init int da850_evm_init_cpufreq(void)
{
@@ -1444,6 +1451,10 @@ static __init void da850_evm_init(void)
{
int ret;
+ ret = da8xx_register_gpio(&da850_gpio_platform_data);
+ if (ret)
+ pr_warn("da850_evm_init: GPIO init failed: %d\n", ret);
+
ret = pmic_tps65070_init();
if (ret)
pr_warn("%s: TPS65070 PMIC init failed: %d\n", __func__, ret);
@@ -13,6 +13,7 @@
#include <linux/init.h>
#include <linux/console.h>
#include <linux/gpio.h>
+#include <linux/platform_data/gpio-davinci.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -20,6 +21,7 @@
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
#include <mach/mux.h>
+#include <mach/common.h>
#define HAWKBOARD_PHY_ID "davinci_mdio-0:07"
#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12)
@@ -1195,10 +1195,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
.intc_irq_prios = da830_default_priorities,
.intc_irq_num = DA830_N_CP_INTC_IRQ,
.timer_info = &da830_timer_info,
- .gpio_type = GPIO_TYPE_DAVINCI,
- .gpio_base = DA8XX_GPIO_BASE,
- .gpio_num = 128,
- .gpio_irq = IRQ_DA8XX_GPIO0,
.serial_dev = &da8xx_serial_device,
.emac_pdata = &da8xx_emac_pdata,
};
@@ -1297,10 +1297,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
.intc_irq_prios = da850_default_priorities,
.intc_irq_num = DA850_N_CP_INTC_IRQ,
.timer_info = &da850_timer_info,
- .gpio_type = GPIO_TYPE_DAVINCI,
- .gpio_base = DA8XX_GPIO_BASE,
- .gpio_num = 144,
- .gpio_irq = IRQ_DA8XX_GPIO0,
.serial_dev = &da8xx_serial_device,
.emac_pdata = &da8xx_emac_pdata,
.sram_dma = DA8XX_SHARED_RAM_BASE,
Create davinci gpio device and remove references in davinci_soc_info structure. Also rearrange header file inclusion in group basis. Signed-off-by: Philip Avinash <avinashphilip@ti.com> --- arch/arm/mach-davinci/board-da830-evm.c | 19 +++++++++++++++---- arch/arm/mach-davinci/board-da850-evm.c | 11 +++++++++++ arch/arm/mach-davinci/board-omapl138-hawk.c | 2 ++ arch/arm/mach-davinci/da830.c | 4 ---- arch/arm/mach-davinci/da850.c | 4 ---- 5 files changed, 28 insertions(+), 12 deletions(-)