From patchwork Fri Aug 21 18:55:17 2009 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sergei Shtylyov X-Patchwork-Id: 43187 Received: from devils.ext.ti.com (devils.ext.ti.com [198.47.26.153]) by demeter.kernel.org (8.14.2/8.14.2) with ESMTP id n7LIsdTD020384 for ; Fri, 21 Aug 2009 18:54:40 GMT Received: from dlep33.itg.ti.com ([157.170.170.112]) by devils.ext.ti.com (8.13.7/8.13.7) with ESMTP id n7LIsY3H026053 for ; Fri, 21 Aug 2009 13:54:39 -0500 Received: from linux.omap.com (localhost [127.0.0.1]) by dlep33.itg.ti.com (8.13.7/8.13.7) with ESMTP id n7LIsXIU012523 for ; Fri, 21 Aug 2009 13:54:34 -0500 (CDT) Received: from linux.omap.com (localhost [127.0.0.1]) by linux.omap.com (Postfix) with ESMTP id 60EA48068E for ; Fri, 21 Aug 2009 13:54:20 -0500 (CDT) X-Original-To: davinci-linux-open-source@linux.davincidsp.com Delivered-To: davinci-linux-open-source@linux.davincidsp.com Received: from dflp53.itg.ti.com (dflp53.itg.ti.com [128.247.5.6]) by linux.omap.com (Postfix) with ESMTP id 0B47C80626 for ; Fri, 21 Aug 2009 13:53:59 -0500 (CDT) Received: from red.ext.ti.com (localhost [127.0.0.1]) by dflp53.itg.ti.com (8.13.8/8.13.8) with ESMTP id n7LIrw4P025835 for ; Fri, 21 Aug 2009 13:53:58 -0500 (CDT) Received: from mail181-va3-R.bigfish.com (mail-va3.bigfish.com [216.32.180.114]) by red.ext.ti.com (8.13.7/8.13.7) with ESMTP id n7LIrqLk002641 for ; Fri, 21 Aug 2009 13:53:58 -0500 Received: from mail181-va3 (localhost.localdomain [127.0.0.1]) by mail181-va3-R.bigfish.com (Postfix) with ESMTP id B5E9115002D1 for ; Fri, 21 Aug 2009 18:53:52 +0000 (UTC) X-SpamScore: -7 X-BigFish: vps-7(zz119bM1b0bM19c2kzz1202hzzz2dh6bh62h) X-Spam-TCS-SCL: 1:0 X-FB-SS: 5, X-MS-Exchange-Organization-Antispam-Report: OrigIP: 63.81.120.155; Service: EHS Received: by mail181-va3 (MessageSwitch) id 1250880829453625_2526; Fri, 21 Aug 2009 18:53:49 +0000 (UCT) Received: from imap.sh.mvista.com (unknown [63.81.120.155]) by mail181-va3.bigfish.com (Postfix) with ESMTP id 318401038050 for ; Fri, 21 Aug 2009 18:53:49 +0000 (UTC) Received: from wasted.dev.rtsoft.ru (unknown [10.150.0.9]) by imap.sh.mvista.com (Postfix) with ESMTP id 2DB383EC9; Fri, 21 Aug 2009 11:53:47 -0700 (PDT) From: Sergei Shtylyov Organization: MontaVista Software Inc. To: davinci-linux-open-source@linux.davincidsp.com, linux-usb@vger.kernel.org Date: Fri, 21 Aug 2009 22:55:17 +0400 User-Agent: KMail/1.5 MIME-Version: 1.0 Content-Disposition: inline Message-Id: <200908212255.17449.sshtylyov@ru.mvista.com> Cc: Subject: [PATCH RFC 3/3] DA830 EVM: OHCI platform code X-BeenThere: davinci-linux-open-source@linux.davincidsp.com X-Mailman-Version: 2.1.4 Precedence: list List-Id: davinci-linux-open-source.linux.davincidsp.com List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: davinci-linux-open-source-bounces+patchwork-davinci=patchwork.kernel.org@linux.davincidsp.com Errors-To: davinci-linux-open-source-bounces+patchwork-davinci=patchwork.kernel.org@linux.davincidsp.com On this board the OHCI port's power control and over-current signals from TPS2065 power switch are connected via GPIO1[15] and GPIO2[1] respectively, so we can implement the DA8xx OHCI glue layer's hooks for overriding the root hub port's power and over-current status bits. We also have to properly set up the clocking mode in the CFGCHIP2 register, so that internal 24 MHz reference clock is fed to the USB 2.0 (MUSB) PHY and its output is used to clock the USB 1.1 (OHCI) PHY... Signed-off-by: Sergei Shtylyov --- The patch is against the recent DaVinci tree... arch/arm/mach-davinci/board-da830-evm.c | 127 ++++++++++++++++++++++++++++++++ 1 files changed, 127 insertions(+) Index: linux-davinci/arch/arm/mach-davinci/board-da830-evm.c =================================================================== --- linux-davinci.orig/arch/arm/mach-davinci/board-da830-evm.c +++ linux-davinci/arch/arm/mach-davinci/board-da830-evm.c @@ -13,6 +13,8 @@ #include #include #include +#include +#include #include #include @@ -24,6 +26,8 @@ #include #include #include +#include +#include #define DA830_EVM_PHY_MASK 0x0 #define DA830_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */ @@ -48,6 +52,127 @@ static struct davinci_i2c_platform_data .bus_delay = 0, /* usec */ }; +/* + * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4]. + */ +#define ON_BD_USB_DRV GPIO(31) /* GPIO1[15] */ +#define ON_BD_USB_OVC GPIO(36) /* GPIO2[4] */ + +static const short da830_evm_usb11_pins[] = { + DA830_GPIO1_15, DA830_GPIO2_4, + -1 +}; + +static da8xx_ocic_handler_t da830_evm_usb_ocic_handler; + +static int da830_evm_usb_set_power(unsigned port, int on) +{ + gpio_set_value(ON_BD_USB_DRV, on); + return 0; +} + +static int da830_evm_usb_get_power(unsigned port) +{ + return gpio_get_value(ON_BD_USB_DRV); +} + +static int da830_evm_usb_get_oci(unsigned port) +{ + return !gpio_get_value(ON_BD_USB_OVC); +} + +static irqreturn_t da830_evm_usb_ocic_irq(int, void *); + +static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler) +{ + int irq = gpio_to_irq(ON_BD_USB_OVC); + int error = 0; + + if (handler != NULL) { + da830_evm_usb_ocic_handler = handler; + + error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED | + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "OHCI over-current indicator", NULL); + if (error) + printk(KERN_ERR "%s: could not request IRQ to watch " + "over-current indicator changes\n", __func__); + } else + free_irq(irq, NULL); + + return error; +} + +static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = { + .set_power = da830_evm_usb_set_power, + .get_power = da830_evm_usb_get_power, + .get_oci = da830_evm_usb_get_oci, + .ocic_notify = da830_evm_usb_ocic_notify, + + /* TPS2065 switch @ 5V */ + .potpgt = (3 + 1) / 2, /* 3 ms max */ +}; + +static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id) +{ + da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata, 1); + return IRQ_HANDLED; +} + +static __init void da830_evm_usb_init(void) +{ + u32 cfgchip2; + int ret; + + /* + * Set up USB clock/mode in the CFGCHIP2 register. + * FYI: CFGCHIP2 is 0x0000ef00 initially. + */ + cfgchip2 = __raw_readl(IO_ADDRESS(DA8XX_BOOT_CFG_BASE + CFGCHIP2)); + + /* USB2.0 PHY reference clock is 24 MHz */ + cfgchip2 &= ~CFGCHIP2_REFFREQ; + cfgchip2 |= CFGCHIP2_REFFREQ_24MHZ; + + /* + * Select internal reference clock for USB 2.0 PHY + * and use it as a clock source for USB 1.1 PHY + * (this is the default setting anyway). + */ + cfgchip2 &= ~CFGCHIP2_USB1PHYCLKMUX; + cfgchip2 |= CFGCHIP2_USB2PHYCLKMUX; + + __raw_writel(cfgchip2, IO_ADDRESS(DA8XX_BOOT_CFG_BASE + CFGCHIP2)); + + ret = da8xx_pinmux_setup(da830_evm_usb11_pins); + if (ret) { + pr_warning("%s: USB 1.1 PinMux setup failed: %d\n", + __func__, ret); + return; + } + + ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV"); + if (ret) { + printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port " + "power control: %d\n", __func__, ret); + return; + } + gpio_direction_output(ON_BD_USB_DRV, 0); + + ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC"); + if (ret) { + printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port " + "over-current indicator: %d\n", __func__, ret); + return; + } + gpio_direction_input(ON_BD_USB_OVC); + + ret = da8xx_register_usb11(&da830_evm_usb11_pdata); + if (ret) + pr_warning("%s: USB 1.1 registration failed: %d\n", + __func__, ret); +} + static struct davinci_uart_config da830_evm_uart_config __initdata = { .enabled_uarts = 0x7, }; @@ -91,6 +216,8 @@ static __init void da830_evm_init(void) pr_warning("da830_evm_init: i2c0 registration failed: %d\n", ret); + da830_evm_usb_init(); + soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK; soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY; soc_info->emac_pdata->rmii_en = 1;