diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 04f2e08..ebaf09b 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -201,5 +201,12 @@ config REGULATOR_88PM8607
     help
       This driver supports 88PM8607 voltage regulator chips.

+config REGULATOR_DS1803
+    tristate "Dallas Maxim DS1803 addressable dual digital potentiometer"
+    depends on I2C
+    help
+      Say Y here to support the dual digital potentiometer on
+      Dallas Maxim DS1803
+
 endif

diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 4e7feec..c0fe050 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -31,5 +31,6 @@ obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
 obj-$(CONFIG_REGULATOR_TPS65023) += tps65023-regulator.o
 obj-$(CONFIG_REGULATOR_TPS6507X) += tps6507x-regulator.o
 obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
+obj-$(CONFIG_REGULATOR_DS1803) += ds1803.o

 ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
diff --git a/drivers/regulator/ds1803.c b/drivers/regulator/ds1803.c
new file mode 100644
index 0000000..8621a59
--- /dev/null
+++ b/drivers/regulator/ds1803.c
@@ -0,0 +1,204 @@
+/*
+ * ds1803.c  --  Voltage regulation for the DS1803
+ *
+ * Copyright (C) 2009 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (C) 2009 Bticino S.p.A. <info@bticino.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
USA
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/ds1803.h>
+#include <linux/slab.h>
+
+struct ds1803_data {
+    struct i2c_client *client;
+    struct regulator_dev *rdev;
+
+    unsigned int min_uV;    /* voltage for selector value 0 */
+    unsigned int max_uV;    /* voltage for selector value 255 */
+    unsigned int init_uV;    /* initial voltage */
+};
+
+/*
+ * Low level functions
+ */
+
+static u8 ds1803_write_pot_lut[] = { 0xa9, 0xaa, /* both not supported */
};
+
+static int ds1803_set_voltage(struct regulator_dev *rdev,
+                    int min_uV, int max_uV)
+{
+    struct ds1803_data *ds1803 = rdev_get_drvdata(rdev);
+    struct i2c_client *client = ds1803->client;
+    unsigned int id = rdev_get_id(rdev);
+    int val;
+    u8 buf[2] = { ds1803_write_pot_lut[id], 0 };
+    struct i2c_msg msgs[1] = {
+        { client->addr  , 0, 2, buf },
+    };
+    int ret;
+
+
+    val = (min_uV - ds1803->min_uV) * 255 / ds1803->max_uV;
+
+    pr_notice("%s Writing %d to pot %d\n",__func__, val,id);
+
+    if (val < 0 || val > 255)
+        return -EINVAL;
+    buf[1] = val;
+
+    ret = i2c_transfer(client->adapter, &msgs[0], 1);
+    if (ret != 1) {
+        dev_err(&client->dev, "%s: write error\n", __func__);
+        return -EIO;
+    }
+
+    return 0;
+}
+
+static int ds1803_list_voltage(struct regulator_dev *rdev, unsigned index)
+{
+    struct ds1803_data *ds1803 = rdev_get_drvdata(rdev);
+
+    return (ds1803->max_uV - ds1803->min_uV) * index / 255
+                            + ds1803->min_uV;
+}
+
+/*
+ * Regulator methods
+ */
+
+static struct regulator_ops ds1803_voltage_ops = {
+    .set_voltage = ds1803_set_voltage,
+    .list_voltage = ds1803_list_voltage,
+};
+
+static char *ds1803_names[] = {
+    [DS1803_100K] = "trimmer_100k",
+    [DS1803_50K] = "trimmer_50k",
+    [DS1803_10K] = "trimmer_10k",
+};
+
+static struct regulator_desc ds1803_reg[] = {
+    {
+        .type = REGULATOR_VOLTAGE,
+        .id = 0,
+        .n_voltages = 256,
+        .ops = &ds1803_voltage_ops,
+        .owner = THIS_MODULE,
+    },
+    {
+        .type = REGULATOR_VOLTAGE,
+        .id = 1,
+        .n_voltages = 256,
+        .ops = &ds1803_voltage_ops,
+        .owner = THIS_MODULE,
+    },
+};
+
+static int ds1803_i2c_probe(struct i2c_client *client,
+                  const struct i2c_device_id *i2c_id)
+{
+    struct ds1803_platform_data *pdata = client->dev.platform_data;
+    struct ds1803_data *ds1803;
+    int i, ret = -ENOMEM;
+
+    ds1803 = kzalloc(sizeof(struct ds1803_data) * 2, GFP_KERNEL);
+    if (!ds1803)
+        goto out;
+
+    for (i = 0; i < 2; i++) {
+        ds1803[i].client = client;
+
+        /* No init_data -> no regulation */
+        if (!pdata->subdev[i].init)
+            continue;
+
+        /* Set chip's name according to user supplied type */
+        ds1803_reg[i].name = ds1803_names[pdata->type];
+
+        ds1803[i].min_uV = pdata->subdev[i].min_uV;
+        ds1803[i].max_uV = pdata->subdev[i].max_uV;
+        ds1803[i].rdev = regulator_register(&ds1803_reg[i],
+                    &client->dev,
+                    pdata->subdev[i].init, &ds1803[i]);
+        if (IS_ERR(ds1803[i].rdev)) {
+            dev_err(&client->dev,
+                "failed to register regulator %d\n", i);
+            goto err;
+        }
+    }
+
+    i2c_set_clientdata(client, ds1803);
+    dev_info(&client->dev, "DS1803 regulator driver loaded\n");
+    return 0;
+
+err:
+    while (--i >= 0)
+        regulator_unregister(ds1803[i].rdev);
+    kfree(ds1803);
+out:
+    return ret;
+}
+static int ds1803_i2c_remove(struct i2c_client *client)
+{
+    struct ds1803_data *ds1803 = i2c_get_clientdata(client);
+    int i;
+
+    for (i = 0; i < 2; i++)
+        if (ds1803[i].rdev)
+            regulator_unregister(ds1803[i].rdev);
+    kfree(ds1803);
+    i2c_set_clientdata(client, NULL);
+
+    return 0;
+}
+
+static const struct i2c_device_id ds1803_id[] = {
+    { "ds1803", 0 },
+    { }
+};
+MODULE_DEVICE_TABLE(i2c, ds1803_id);
+
+static struct i2c_driver ds1803_i2c_driver = {
+    .probe = ds1803_i2c_probe,
+    .remove = ds1803_i2c_remove,
+    .driver        = {
+        .name    = "ds1803",
+    },
+    .id_table    = ds1803_id,
+};
+
+static int __init ds1803_i2c_init(void)
+{
+    return i2c_add_driver(&ds1803_i2c_driver);
+}
+subsys_initcall(ds1803_i2c_init);
+
+static void __exit ds1803_i2c_exit(void)
+{
+    i2c_del_driver(&ds1803_i2c_driver);
+}
+module_exit(ds1803_i2c_exit);
+
+/* Module information */
+MODULE_DESCRIPTION("DS1803 voltage regulator driver");
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/regulator/ds1803.h
b/include/linux/regulator/ds1803.h
new file mode 100644
index 0000000..6bce0ec
--- /dev/null
+++ b/include/linux/regulator/ds1803.h
@@ -0,0 +1,41 @@
+/*
+ * ds1803.h  --  Voltage regulation for the DS1803
+ *
+ * Copyright (C) 2009 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (C) 2009 Bticino S.p.A. <info@bticino.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
USA
+ */
+
+#ifndef _DS1803_H
+#define _DS1803_H
+
+#include <linux/regulator/machine.h>
+
+enum ds1803_type {
+    DS1803_100K,
+    DS1803_50K,
+    DS1803_10K,
+};
+
+struct ds1803_platform_data {
+    enum ds1803_type type;
+    struct {
+        unsigned int min_uV;
+        unsigned int max_uV;
+        struct regulator_init_data *init;
+    } subdev[2];
+};
+
