mbox series

[V9,XDMA,0/2] xilinx XDMA driver

Message ID 1666720638-33496-1-git-send-email-lizhi.hou@amd.com (mailing list archive)
Headers show
Series xilinx XDMA driver | expand

Message

Lizhi Hou Oct. 25, 2022, 5:57 p.m. UTC
Hello,

This V9 of patch series is to provide the platform driver to support the
Xilinx XDMA subsystem. The XDMA subsystem is used in conjunction with the
PCI Express IP block to provide high performance data transfer between host
memory and the card's DMA subsystem. It also provides up to 16 user
interrupt wires to user logic that generate interrupts to the host.

            +-------+       +-------+       +-----------+
   PCIe     |       |       |       |       |           |
   Tx/Rx    |       |       |       |  AXI  |           |
 <=======>  | PCIE  | <===> | XDMA  | <====>| User Logic|
            |       |       |       |       |           |
            +-------+       +-------+       +-----------+

The XDMA has been used for Xilinx Alveo PCIe devices.
And it is also integrated into Versal ACAP DMA and Bridge Subsystem.
    https://www.xilinx.com/products/boards-and-kits/alveo.html
    https://docs.xilinx.com/r/en-US/pg344-pcie-dma-versal/Introduction-to-the-DMA-and-Bridge-Subsystems

The device driver for any FPGA based PCIe device which leverages XDMA can
call the standard dmaengine APIs to discover and use the XDMA subsystem
without duplicating the XDMA driver code in its own driver.

Changes since v8:
- Fixed test robot failure on s390.

Changes since v7:
- Used pci device pointer for dma_pool_create().

Changes since v6:
- Fixed descriptor filling bug.

Changes since v5:
- Modified user logic interrupt APIs to handle user logic IP which does not
  have its own register to enable/disable interrupt.
- Clean up code based on review comments.

Changes since v4:
- Modified user logic interrupt APIs.

Changes since v3:
- Added one patch to support user logic interrupt.

Changes since v2:
- Removed tasklet.
- Fixed regression bug introduced to V2.
- Test Robot warning.

Changes since v1:
- Moved filling hardware descriptor to xdma_prep_device_sg().
- Changed hardware descriptor enum to "struct xdma_hw_desc".
- Minor changes from code review comments.

Lizhi Hou (2):
  dmaengine: xilinx: xdma: Add xilinx xdma driver
  dmaengine: xilinx: xdma: Add user logic interrupt support

 MAINTAINERS                            |   11 +
 drivers/dma/Kconfig                    |   14 +
 drivers/dma/xilinx/Makefile            |    1 +
 drivers/dma/xilinx/xdma-regs.h         |  171 ++++
 drivers/dma/xilinx/xdma.c              | 1041 ++++++++++++++++++++++++
 include/linux/dma/amd_xdma.h           |   16 +
 include/linux/platform_data/amd_xdma.h |   34 +
 7 files changed, 1288 insertions(+)
 create mode 100644 drivers/dma/xilinx/xdma-regs.h
 create mode 100644 drivers/dma/xilinx/xdma.c
 create mode 100644 include/linux/dma/amd_xdma.h
 create mode 100644 include/linux/platform_data/amd_xdma.h