@@ -52,9 +52,17 @@
#define MPC_DMA_DESCRIPTORS 64
/* Macro definitions */
-#define MPC_DMA_CHANNELS 64
#define MPC_DMA_TCD_OFFSET 0x1000
+/*
+ * Maximum channel counts for individual hardware variants
+ * and the maximum channel count over all supported controllers,
+ * used for data structure size
+ */
+#define MPC8308_DMACHAN_MAX 16
+#define MPC512x_DMACHAN_MAX 64
+#define MPC_DMA_CHANNELS 64
+
/* Arbitration mode of group and channel */
#define MPC_DMA_DMACR_EDCG (1 << 31)
#define MPC_DMA_DMACR_ERGA (1 << 3)
@@ -710,10 +718,10 @@ static int mpc_dma_probe(struct platform_device *op)
dma = &mdma->dma;
dma->dev = dev;
- if (!mdma->is_mpc8308)
- dma->chancnt = MPC_DMA_CHANNELS;
+ if (mdma->is_mpc8308)
+ dma->chancnt = MPC8308_DMACHAN_MAX;
else
- dma->chancnt = 16; /* MPC8308 DMA has only 16 channels */
+ dma->chancnt = MPC512x_DMACHAN_MAX;
dma->device_alloc_chan_resources = mpc_dma_alloc_chan_resources;
dma->device_free_chan_resources = mpc_dma_free_chan_resources;
dma->device_issue_pending = mpc_dma_issue_pending;
@@ -747,7 +755,19 @@ static int mpc_dma_probe(struct platform_device *op)
* - Round-robin group arbitration,
* - Round-robin channel arbitration.
*/
- if (!mdma->is_mpc8308) {
+ if (mdma->is_mpc8308) {
+ /* MPC8308 has 16 channels and lacks some registers */
+ out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_ERCA);
+
+ /* enable snooping */
+ out_be32(&mdma->regs->dmagpor, MPC_DMA_DMAGPOR_SNOOP_ENABLE);
+ /* Disable error interrupts */
+ out_be32(&mdma->regs->dmaeeil, 0);
+
+ /* Clear interrupts status */
+ out_be32(&mdma->regs->dmaintl, 0xFFFF);
+ out_be32(&mdma->regs->dmaerrl, 0xFFFF);
+ } else {
out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_EDCG |
MPC_DMA_DMACR_ERGA | MPC_DMA_DMACR_ERCA);
@@ -768,18 +788,6 @@ static int mpc_dma_probe(struct platform_device *op)
/* Route interrupts to IPIC */
out_be32(&mdma->regs->dmaihsa, 0);
out_be32(&mdma->regs->dmailsa, 0);
- } else {
- /* MPC8308 has 16 channels and lacks some registers */
- out_be32(&mdma->regs->dmacr, MPC_DMA_DMACR_ERCA);
-
- /* enable snooping */
- out_be32(&mdma->regs->dmagpor, MPC_DMA_DMAGPOR_SNOOP_ENABLE);
- /* Disable error interrupts */
- out_be32(&mdma->regs->dmaeeil, 0);
-
- /* Clear interrupts status */
- out_be32(&mdma->regs->dmaintl, 0xFFFF);
- out_be32(&mdma->regs->dmaerrl, 0xFFFF);
}
/* Register DMA engine */
Concentrate the specific code for MPC8308 in the 'if' branch and handle MPC512x in the 'else' branch. This modification only reorders instructions but doesn't change behaviour. Signed-off-by: Alexander Popov <a13xp0p0v88@gmail.com> --- drivers/dma/mpc512x_dma.c | 42 +++++++++++++++++++++++++----------------- 1 file changed, 25 insertions(+), 17 deletions(-)