diff mbox

[2/2] dmaengine: s3c24xx-dma: Add cyclic transfer support

Message ID 1400445876-17460-1-git-send-email-anarsoul@gmail.com (mailing list archive)
State Rejected
Delegated to: Vinod Koul
Headers show

Commit Message

Vasily Khoruzhick May 18, 2014, 8:44 p.m. UTC 
Many audio interface drivers require support of cyclic transfers to work
correctly, for example Samsung ASoC DMA driver. This patch adds support
for cyclic transfers to the s3c24xx-dma driver

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
---
 drivers/dma/s3c24xx-dma.c | 111 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 110 insertions(+), 1 deletion(-)

Comments

Heiko Stübner May 18, 2014, 11:03 p.m. UTC | #1 
Am Sonntag, 18. Mai 2014, 23:44:36 schrieb Vasily Khoruzhick:
> Many audio interface drivers require support of cyclic transfers to work
> correctly, for example Samsung ASoC DMA driver. This patch adds support
> for cyclic transfers to the s3c24xx-dma driver
> 
> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>

Really nice addition :-) .

I'm just not sure if the chunk of copy'n'pasted setup code is big enough to 
warant a move to shared function or not.

Nevertheless,

Acked-by: Heiko Stuebner <heiko@sntech.de>

> ---
>  drivers/dma/s3c24xx-dma.c | 111
> +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 110
> insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/dma/s3c24xx-dma.c b/drivers/dma/s3c24xx-dma.c
> index 2167608..1e419fb 100644
> --- a/drivers/dma/s3c24xx-dma.c
> +++ b/drivers/dma/s3c24xx-dma.c
> @@ -164,6 +164,7 @@ struct s3c24xx_sg {
>   * @disrcc: value for source control register
>   * @didstc: value for destination control register
>   * @dcon: base value for dcon register
> + * @cyclic: indicate cyclic transfer
>   */
>  struct s3c24xx_txd {
>  	struct virt_dma_desc vd;
> @@ -173,6 +174,7 @@ struct s3c24xx_txd {
>  	u32 disrcc;
>  	u32 didstc;
>  	u32 dcon;
> +	bool cyclic;
>  };
> 
>  struct s3c24xx_dma_chan;
> @@ -669,8 +671,10 @@ static irqreturn_t s3c24xx_dma_irq(int irq, void *data)
> /* when more sg's are in this txd, start the next one */
>  		if (!list_is_last(txd->at, &txd->dsg_list)) {
>  			txd->at = txd->at->next;
> +			if (txd->cyclic)
> +				vchan_cyclic_callback(&txd->vd);
>  			s3c24xx_dma_start_next_sg(s3cchan, txd);
> -		} else {
> +		} else if (!txd->cyclic) {
>  			s3cchan->at = NULL;
>  			vchan_cookie_complete(&txd->vd);
> 
> @@ -682,6 +686,12 @@ static irqreturn_t s3c24xx_dma_irq(int irq, void *data)
> s3c24xx_dma_start_next_txd(s3cchan);
>  			else
>  				s3c24xx_dma_phy_free(s3cchan);
> +		} else {
> +			vchan_cyclic_callback(&txd->vd);
> +
> +			/* Cyclic: reset at beginning */
> +			txd->at = txd->dsg_list.next;
> +			s3c24xx_dma_start_next_sg(s3cchan, txd);
>  		}
>  	}
>  	spin_unlock(&s3cchan->vc.lock);
> @@ -877,6 +887,103 @@ static struct dma_async_tx_descriptor
> *s3c24xx_dma_prep_memcpy( return vchan_tx_prep(&s3cchan->vc, &txd->vd,
> flags);
>  }
> 
> +static struct dma_async_tx_descriptor *s3c24xx_dma_prep_dma_cyclic(
> +	struct dma_chan *chan, dma_addr_t addr, size_t size, size_t period,
> +	enum dma_transfer_direction direction, unsigned long flags,
> +	void *context)
> +{
> +	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
> +	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
> +	const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
> +	struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id];
> +	struct s3c24xx_txd *txd;
> +	struct s3c24xx_sg *dsg;
> +	unsigned sg_len;
> +	dma_addr_t slave_addr;
> +	u32 hwcfg = 0;
> +	int i;
> +
> +	dev_dbg(&s3cdma->pdev->dev,
> +		"prepare cyclic transaction of %d bytes with period %d from %s\n",
> +		size, period, s3cchan->name);
> +
> +	txd = s3c24xx_dma_get_txd();
> +	if (!txd)
> +		return NULL;
> +
> +	txd->cyclic = 1;
> +
> +	if (cdata->handshake)
> +		txd->dcon |= S3C24XX_DCON_HANDSHAKE;
> +
> +	switch (cdata->bus) {
> +	case S3C24XX_DMA_APB:
> +		txd->dcon |= S3C24XX_DCON_SYNC_PCLK;
> +		hwcfg |= S3C24XX_DISRCC_LOC_APB;
> +		break;
> +	case S3C24XX_DMA_AHB:
> +		txd->dcon |= S3C24XX_DCON_SYNC_HCLK;
> +		hwcfg |= S3C24XX_DISRCC_LOC_AHB;
> +		break;
> +	}
> +
> +	/*
> +	 * Always assume our peripheral desintation is a fixed
> +	 * address in memory.
> +	 */
> +	hwcfg |= S3C24XX_DISRCC_INC_FIXED;
> +
> +	/*
> +	 * Individual dma operations are requested by the slave,
> +	 * so serve only single atomic operations (S3C24XX_DCON_SERV_SINGLE).
> +	 */
> +	txd->dcon |= S3C24XX_DCON_SERV_SINGLE;
> +
> +	if (direction == DMA_MEM_TO_DEV) {
> +		txd->disrcc = S3C24XX_DISRCC_LOC_AHB |
> +			      S3C24XX_DISRCC_INC_INCREMENT;
> +		txd->didstc = hwcfg;
> +		slave_addr = s3cchan->cfg.dst_addr;
> +		txd->width = s3cchan->cfg.dst_addr_width;
> +	} else if (direction == DMA_DEV_TO_MEM) {
> +		txd->disrcc = hwcfg;
> +		txd->didstc = S3C24XX_DIDSTC_LOC_AHB |
> +			      S3C24XX_DIDSTC_INC_INCREMENT;
> +		slave_addr = s3cchan->cfg.src_addr;
> +		txd->width = s3cchan->cfg.src_addr_width;
> +	} else {
> +		s3c24xx_dma_free_txd(txd);
> +		dev_err(&s3cdma->pdev->dev,
> +			"direction %d unsupported\n", direction);
> +		return NULL;
> +	}
> +
> +	sg_len = size / period;
> +
> +	for (i = 0; i < sg_len; i++) {
> +		dsg = kzalloc(sizeof(*dsg), GFP_NOWAIT);
> +		if (!dsg) {
> +			s3c24xx_dma_free_txd(txd);
> +			return NULL;
> +		}
> +		list_add_tail(&dsg->node, &txd->dsg_list);
> +
> +		dsg->len = period;
> +		/* Check last period length */
> +		if (i == (sg_len - 1))
> +			dsg->len = size - (period * i);
> +		if (direction == DMA_MEM_TO_DEV) {
> +			dsg->src_addr = addr + (period * i);
> +			dsg->dst_addr = slave_addr;
> +		} else { /* DMA_DEV_TO_MEM */
> +			dsg->src_addr = slave_addr;
> +			dsg->dst_addr = addr + (period * i);
> +		}
> +	}
> +
> +	return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags);
> +}
> +
>  static struct dma_async_tx_descriptor *s3c24xx_dma_prep_slave_sg(
>  		struct dma_chan *chan, struct scatterlist *sgl,
>  		unsigned int sg_len, enum dma_transfer_direction direction,
> @@ -1197,6 +1304,7 @@ static int s3c24xx_dma_probe(struct platform_device
> *pdev)
> 
>  	/* Initialize slave engine for SoC internal dedicated peripherals */
>  	dma_cap_set(DMA_SLAVE, s3cdma->slave.cap_mask);
> +	dma_cap_set(DMA_CYCLIC, s3cdma->slave.cap_mask);
>  	dma_cap_set(DMA_PRIVATE, s3cdma->slave.cap_mask);
>  	s3cdma->slave.dev = &pdev->dev;
>  	s3cdma->slave.device_alloc_chan_resources =
> @@ -1206,6 +1314,7 @@ static int s3c24xx_dma_probe(struct platform_device
> *pdev) s3cdma->slave.device_tx_status = s3c24xx_dma_tx_status;
>  	s3cdma->slave.device_issue_pending = s3c24xx_dma_issue_pending;
>  	s3cdma->slave.device_prep_slave_sg = s3c24xx_dma_prep_slave_sg;
> +	s3cdma->slave.device_prep_dma_cyclic = s3c24xx_dma_prep_dma_cyclic;
>  	s3cdma->slave.device_control = s3c24xx_dma_control;
> 
>  	/* Register as many memcpy channels as there are physical channels */

--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Andy Shevchenko May 19, 2014, 8:40 a.m. UTC | #2 
On Sun, 2014-05-18 at 23:44 +0300, Vasily Khoruzhick wrote:
> Many audio interface drivers require support of cyclic transfers to work
> correctly, for example Samsung ASoC DMA driver. This patch adds support
> for cyclic transfers to the s3c24xx-dma driver

> +static struct dma_async_tx_descriptor *s3c24xx_dma_prep_dma_cyclic(
> +	struct dma_chan *chan, dma_addr_t addr, size_t size, size_t period,
> +	enum dma_transfer_direction direction, unsigned long flags,
> +	void *context)
> +{
> +	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
> +	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
> +	const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
> +	struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id];
> +	struct s3c24xx_txd *txd;
> +	struct s3c24xx_sg *dsg;
> +	unsigned sg_len;
> +	dma_addr_t slave_addr;
> +	u32 hwcfg = 0;
> +	int i;
> +
> +	dev_dbg(&s3cdma->pdev->dev,
> +		"prepare cyclic transaction of %d bytes with period %d from %s\n",
> +		size, period, s3cchan->name);
> +
> +	txd = s3c24xx_dma_get_txd();
> +	if (!txd)
> +		return NULL;
> +
> +	txd->cyclic = 1;
> +
> +	if (cdata->handshake)
> +		txd->dcon |= S3C24XX_DCON_HANDSHAKE;
> +
> +	switch (cdata->bus) {
> +	case S3C24XX_DMA_APB:
> +		txd->dcon |= S3C24XX_DCON_SYNC_PCLK;
> +		hwcfg |= S3C24XX_DISRCC_LOC_APB;
> +		break;
> +	case S3C24XX_DMA_AHB:
> +		txd->dcon |= S3C24XX_DCON_SYNC_HCLK;
> +		hwcfg |= S3C24XX_DISRCC_LOC_AHB;
> +		break;
> +	}
> +
> +	/*
> +	 * Always assume our peripheral desintation is a fixed
> +	 * address in memory.
> +	 */
> +	hwcfg |= S3C24XX_DISRCC_INC_FIXED;
> +
> +	/*
> +	 * Individual dma operations are requested by the slave,
> +	 * so serve only single atomic operations (S3C24XX_DCON_SERV_SINGLE).
> +	 */
> +	txd->dcon |= S3C24XX_DCON_SERV_SINGLE;
> +
> +	if (direction == DMA_MEM_TO_DEV) {
> +		txd->disrcc = S3C24XX_DISRCC_LOC_AHB |
> +			      S3C24XX_DISRCC_INC_INCREMENT;
> +		txd->didstc = hwcfg;
> +		slave_addr = s3cchan->cfg.dst_addr;
> +		txd->width = s3cchan->cfg.dst_addr_width;
> +	} else if (direction == DMA_DEV_TO_MEM) {
> +		txd->disrcc = hwcfg;
> +		txd->didstc = S3C24XX_DIDSTC_LOC_AHB |
> +			      S3C24XX_DIDSTC_INC_INCREMENT;
> +		slave_addr = s3cchan->cfg.src_addr;
> +		txd->width = s3cchan->cfg.src_addr_width;
> +	} else {
> +		s3c24xx_dma_free_txd(txd);
> +		dev_err(&s3cdma->pdev->dev,
> +			"direction %d unsupported\n", direction);
> +		return NULL;
> +	}

Instead of doing this, you may put few lines on top of function

if (!is_slave_direction) {
	dev_err(&s3cdma->pdev->dev, "direction %d unsupported\n", direction);
	return NULL;
}

As an additional effect you can transform the 'else if' to just 'else' above the code.

> +
> +	sg_len = size / period;
> +
> +	for (i = 0; i < sg_len; i++) {
> +		dsg = kzalloc(sizeof(*dsg), GFP_NOWAIT);
> +		if (!dsg) {
> +			s3c24xx_dma_free_txd(txd);
> +			return NULL;
> +		}
> +		list_add_tail(&dsg->node, &txd->dsg_list);
> +
> +		dsg->len = period;
> +		/* Check last period length */
> +		if (i == (sg_len - 1))
> +			dsg->len = size - (period * i);
> +		if (direction == DMA_MEM_TO_DEV) {
> +			dsg->src_addr = addr + (period * i);
> +			dsg->dst_addr = slave_addr;
> +		} else { /* DMA_DEV_TO_MEM */
> +			dsg->src_addr = slave_addr;
> +			dsg->dst_addr = addr + (period * i);
> +		}
> +	}
> +
> +	return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags);
> +}
Vasily Khoruzhick May 19, 2014, 3:34 p.m. UTC | #3 
Hi Andy,

On Mon, May 19, 2014 at 11:40 AM, Andy Shevchenko
<andriy.shevchenko@linux.intel.com> wrote:
>> +
>> +     if (direction == DMA_MEM_TO_DEV) {
>> +             txd->disrcc = S3C24XX_DISRCC_LOC_AHB |
>> +                           S3C24XX_DISRCC_INC_INCREMENT;
>> +             txd->didstc = hwcfg;
>> +             slave_addr = s3cchan->cfg.dst_addr;
>> +             txd->width = s3cchan->cfg.dst_addr_width;
>> +     } else if (direction == DMA_DEV_TO_MEM) {
>> +             txd->disrcc = hwcfg;
>> +             txd->didstc = S3C24XX_DIDSTC_LOC_AHB |
>> +                           S3C24XX_DIDSTC_INC_INCREMENT;
>> +             slave_addr = s3cchan->cfg.src_addr;
>> +             txd->width = s3cchan->cfg.src_addr_width;
>> +     } else {
>> +             s3c24xx_dma_free_txd(txd);
>> +             dev_err(&s3cdma->pdev->dev,
>> +                     "direction %d unsupported\n", direction);
>> +             return NULL;
>> +     }
>
> Instead of doing this, you may put few lines on top of function
>
> if (!is_slave_direction) {
>         dev_err(&s3cdma->pdev->dev, "direction %d unsupported\n", direction);
>         return NULL;
> }
>
> As an additional effect you can transform the 'else if' to just 'else' above the code.

Sounds reasonable, will resend v2 in few mins.

Regards
Vasily

> --
> Andy Shevchenko <andriy.shevchenko@intel.com>
> Intel Finland Oy
--
To unsubscribe from this list: send the line "unsubscribe dmaengine" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/dma/s3c24xx-dma.c b/drivers/dma/s3c24xx-dma.c
index 2167608..1e419fb 100644
--- a/drivers/dma/s3c24xx-dma.c
+++ b/drivers/dma/s3c24xx-dma.c
@@ -164,6 +164,7 @@  struct s3c24xx_sg {
  * @disrcc: value for source control register
  * @didstc: value for destination control register
  * @dcon: base value for dcon register
+ * @cyclic: indicate cyclic transfer
  */
 struct s3c24xx_txd {
 	struct virt_dma_desc vd;
@@ -173,6 +174,7 @@  struct s3c24xx_txd {
 	u32 disrcc;
 	u32 didstc;
 	u32 dcon;
+	bool cyclic;
 };
 
 struct s3c24xx_dma_chan;
@@ -669,8 +671,10 @@  static irqreturn_t s3c24xx_dma_irq(int irq, void *data)
 		/* when more sg's are in this txd, start the next one */
 		if (!list_is_last(txd->at, &txd->dsg_list)) {
 			txd->at = txd->at->next;
+			if (txd->cyclic)
+				vchan_cyclic_callback(&txd->vd);
 			s3c24xx_dma_start_next_sg(s3cchan, txd);
-		} else {
+		} else if (!txd->cyclic) {
 			s3cchan->at = NULL;
 			vchan_cookie_complete(&txd->vd);
 
@@ -682,6 +686,12 @@  static irqreturn_t s3c24xx_dma_irq(int irq, void *data)
 				s3c24xx_dma_start_next_txd(s3cchan);
 			else
 				s3c24xx_dma_phy_free(s3cchan);
+		} else {
+			vchan_cyclic_callback(&txd->vd);
+
+			/* Cyclic: reset at beginning */
+			txd->at = txd->dsg_list.next;
+			s3c24xx_dma_start_next_sg(s3cchan, txd);
 		}
 	}
 	spin_unlock(&s3cchan->vc.lock);
@@ -877,6 +887,103 @@  static struct dma_async_tx_descriptor *s3c24xx_dma_prep_memcpy(
 	return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags);
 }
 
+static struct dma_async_tx_descriptor *s3c24xx_dma_prep_dma_cyclic(
+	struct dma_chan *chan, dma_addr_t addr, size_t size, size_t period,
+	enum dma_transfer_direction direction, unsigned long flags,
+	void *context)
+{
+	struct s3c24xx_dma_chan *s3cchan = to_s3c24xx_dma_chan(chan);
+	struct s3c24xx_dma_engine *s3cdma = s3cchan->host;
+	const struct s3c24xx_dma_platdata *pdata = s3cdma->pdata;
+	struct s3c24xx_dma_channel *cdata = &pdata->channels[s3cchan->id];
+	struct s3c24xx_txd *txd;
+	struct s3c24xx_sg *dsg;
+	unsigned sg_len;
+	dma_addr_t slave_addr;
+	u32 hwcfg = 0;
+	int i;
+
+	dev_dbg(&s3cdma->pdev->dev,
+		"prepare cyclic transaction of %d bytes with period %d from %s\n",
+		size, period, s3cchan->name);
+
+	txd = s3c24xx_dma_get_txd();
+	if (!txd)
+		return NULL;
+
+	txd->cyclic = 1;
+
+	if (cdata->handshake)
+		txd->dcon |= S3C24XX_DCON_HANDSHAKE;
+
+	switch (cdata->bus) {
+	case S3C24XX_DMA_APB:
+		txd->dcon |= S3C24XX_DCON_SYNC_PCLK;
+		hwcfg |= S3C24XX_DISRCC_LOC_APB;
+		break;
+	case S3C24XX_DMA_AHB:
+		txd->dcon |= S3C24XX_DCON_SYNC_HCLK;
+		hwcfg |= S3C24XX_DISRCC_LOC_AHB;
+		break;
+	}
+
+	/*
+	 * Always assume our peripheral desintation is a fixed
+	 * address in memory.
+	 */
+	hwcfg |= S3C24XX_DISRCC_INC_FIXED;
+
+	/*
+	 * Individual dma operations are requested by the slave,
+	 * so serve only single atomic operations (S3C24XX_DCON_SERV_SINGLE).
+	 */
+	txd->dcon |= S3C24XX_DCON_SERV_SINGLE;
+
+	if (direction == DMA_MEM_TO_DEV) {
+		txd->disrcc = S3C24XX_DISRCC_LOC_AHB |
+			      S3C24XX_DISRCC_INC_INCREMENT;
+		txd->didstc = hwcfg;
+		slave_addr = s3cchan->cfg.dst_addr;
+		txd->width = s3cchan->cfg.dst_addr_width;
+	} else if (direction == DMA_DEV_TO_MEM) {
+		txd->disrcc = hwcfg;
+		txd->didstc = S3C24XX_DIDSTC_LOC_AHB |
+			      S3C24XX_DIDSTC_INC_INCREMENT;
+		slave_addr = s3cchan->cfg.src_addr;
+		txd->width = s3cchan->cfg.src_addr_width;
+	} else {
+		s3c24xx_dma_free_txd(txd);
+		dev_err(&s3cdma->pdev->dev,
+			"direction %d unsupported\n", direction);
+		return NULL;
+	}
+
+	sg_len = size / period;
+
+	for (i = 0; i < sg_len; i++) {
+		dsg = kzalloc(sizeof(*dsg), GFP_NOWAIT);
+		if (!dsg) {
+			s3c24xx_dma_free_txd(txd);
+			return NULL;
+		}
+		list_add_tail(&dsg->node, &txd->dsg_list);
+
+		dsg->len = period;
+		/* Check last period length */
+		if (i == (sg_len - 1))
+			dsg->len = size - (period * i);
+		if (direction == DMA_MEM_TO_DEV) {
+			dsg->src_addr = addr + (period * i);
+			dsg->dst_addr = slave_addr;
+		} else { /* DMA_DEV_TO_MEM */
+			dsg->src_addr = slave_addr;
+			dsg->dst_addr = addr + (period * i);
+		}
+	}
+
+	return vchan_tx_prep(&s3cchan->vc, &txd->vd, flags);
+}
+
 static struct dma_async_tx_descriptor *s3c24xx_dma_prep_slave_sg(
 		struct dma_chan *chan, struct scatterlist *sgl,
 		unsigned int sg_len, enum dma_transfer_direction direction,
@@ -1197,6 +1304,7 @@  static int s3c24xx_dma_probe(struct platform_device *pdev)
 
 	/* Initialize slave engine for SoC internal dedicated peripherals */
 	dma_cap_set(DMA_SLAVE, s3cdma->slave.cap_mask);
+	dma_cap_set(DMA_CYCLIC, s3cdma->slave.cap_mask);
 	dma_cap_set(DMA_PRIVATE, s3cdma->slave.cap_mask);
 	s3cdma->slave.dev = &pdev->dev;
 	s3cdma->slave.device_alloc_chan_resources =
@@ -1206,6 +1314,7 @@  static int s3c24xx_dma_probe(struct platform_device *pdev)
 	s3cdma->slave.device_tx_status = s3c24xx_dma_tx_status;
 	s3cdma->slave.device_issue_pending = s3c24xx_dma_issue_pending;
 	s3cdma->slave.device_prep_slave_sg = s3c24xx_dma_prep_slave_sg;
+	s3cdma->slave.device_prep_dma_cyclic = s3c24xx_dma_prep_dma_cyclic;
 	s3cdma->slave.device_control = s3c24xx_dma_control;
 
 	/* Register as many memcpy channels as there are physical channels */