@@ -988,9 +988,11 @@
msiof0: spi@e6e20000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6e20000 0 0x0064>;
+ reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
+ dmas = <&dmac0 0x51>, <&dmac0 0x52>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -998,9 +1000,11 @@
msiof1: spi@e6e10000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6e10000 0 0x0064>;
+ reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>;
interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
+ dmas = <&dmac0 0x55>, <&dmac0 0x56>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1008,9 +1012,11 @@
msiof2: spi@e6e00000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6e00000 0 0x0064>;
+ reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>;
interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
+ dmas = <&dmac0 0x41>, <&dmac0 0x42>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -1018,9 +1024,11 @@
msiof3: spi@e6c90000 {
compatible = "renesas,msiof-r8a7790";
- reg = <0 0xe6c90000 0 0x0064>;
+ reg = <0 0xe6c90000 0 0x0064>, <0 0xe7c90000 0 0x0064>;
interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
+ dmas = <&dmac0 0x45>, <&dmac0 0x46>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
Add register sets used for access by the DMA engine, and DMA properties to the MSIOF nodes. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: devicetree@vger.kernel.org --- This depends on "[PATCH v2 7/8] ARM: shmobile: r8a7790: Add DMAC devices to DT" of series "[PATCH v2 0/8] R-Car Gen2 DMA Controller driver". --- arch/arm/boot/dts/r8a7790.dtsi | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-)