diff mbox

[v1,08/12] spi/pxa2xx: Don't use slave_id of dma_slave_config

Message ID 1408469363-15901-9-git-send-email-andriy.shevchenko@linux.intel.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Andy Shevchenko Aug. 19, 2014, 5:29 p.m. UTC 
From: Mika Westerberg <mika.westerberg@linux.intel.com>

That field has been deprecated in favour of getting the necessary
information from ACPI/DT.

However, we still need to deal systems that are PCI only (no ACPI to back
up). In order to support such systems, we allow the DMA filter function and
its corresponding parameter via pxa2xx_spi_master platform data. Then when
the pxa2xx_spi_dma_setup() doesn't find the channel via ACPI, it falls back
to use the given filter function.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/spi/spi-pxa2xx-dma.c   | 15 ++--------
 drivers/spi/spi-pxa2xx-pci.c   | 64 +++++++++++++++++++++++++++++++-----------
 drivers/spi/spi-pxa2xx.c       |  2 --
 include/linux/spi/pxa2xx_spi.h |  9 +++---
 4 files changed, 54 insertions(+), 36 deletions(-)

Comments

Mark Brown Aug. 19, 2014, 9:13 p.m. UTC | #1 
On Tue, Aug 19, 2014 at 08:29:19PM +0300, Andy Shevchenko wrote:
> From: Mika Westerberg <mika.westerberg@linux.intel.com>
> 
> That field has been deprecated in favour of getting the necessary
> information from ACPI/DT.

Acked-by: Mark Brown <broonie@linaro.org>
Vinod Koul Sept. 11, 2014, 6:20 a.m. UTC | #2 
On Tue, Aug 19, 2014 at 08:29:19PM +0300, Andy Shevchenko wrote:
> From: Mika Westerberg <mika.westerberg@linux.intel.com>
> 
> That field has been deprecated in favour of getting the necessary
> information from ACPI/DT.
> 
> However, we still need to deal systems that are PCI only (no ACPI to back
> up). In order to support such systems, we allow the DMA filter function and
> its corresponding parameter via pxa2xx_spi_master platform data. Then when
> the pxa2xx_spi_dma_setup() doesn't find the channel via ACPI, it falls back
> to use the given filter function.

This fails to apply for me, was it based on dmaengine tree or spi?
diff mbox

Patch

diff --git a/drivers/spi/spi-pxa2xx-dma.c b/drivers/spi/spi-pxa2xx-dma.c
index c41ff14..62a9297 100644
--- a/drivers/spi/spi-pxa2xx-dma.c
+++ b/drivers/spi/spi-pxa2xx-dma.c
@@ -157,7 +157,6 @@  static struct dma_async_tx_descriptor *
 pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data,
 			   enum dma_transfer_direction dir)
 {
-	struct pxa2xx_spi_master *pdata = drv_data->master_info;
 	struct chip_data *chip = drv_data->cur_chip;
 	enum dma_slave_buswidth width;
 	struct dma_slave_config cfg;
@@ -184,7 +183,6 @@  pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data,
 		cfg.dst_addr = drv_data->ssdr_physical;
 		cfg.dst_addr_width = width;
 		cfg.dst_maxburst = chip->dma_burst_size;
-		cfg.slave_id = pdata->tx_slave_id;
 
 		sgt = &drv_data->tx_sgt;
 		nents = drv_data->tx_nents;
@@ -193,7 +191,6 @@  pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data,
 		cfg.src_addr = drv_data->ssdr_physical;
 		cfg.src_addr_width = width;
 		cfg.src_maxburst = chip->dma_burst_size;
-		cfg.slave_id = pdata->rx_slave_id;
 
 		sgt = &drv_data->rx_sgt;
 		nents = drv_data->rx_nents;
@@ -210,14 +207,6 @@  pxa2xx_spi_dma_prepare_one(struct driver_data *drv_data,
 				       DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 }
 
-static bool pxa2xx_spi_dma_filter(struct dma_chan *chan, void *param)
-{
-	const struct pxa2xx_spi_master *pdata = param;
-
-	return chan->chan_id == pdata->tx_chan_id ||
-	       chan->chan_id == pdata->rx_chan_id;
-}
-
 bool pxa2xx_spi_dma_is_possible(size_t len)
 {
 	return len <= MAX_DMA_LEN;
@@ -321,12 +310,12 @@  int pxa2xx_spi_dma_setup(struct driver_data *drv_data)
 		return -ENOMEM;
 
 	drv_data->tx_chan = dma_request_slave_channel_compat(mask,
-				pxa2xx_spi_dma_filter, pdata, dev, "tx");
+				pdata->dma_filter, pdata->tx_param, dev, "tx");
 	if (!drv_data->tx_chan)
 		return -ENODEV;
 
 	drv_data->rx_chan = dma_request_slave_channel_compat(mask,
-				pxa2xx_spi_dma_filter, pdata, dev, "rx");
+				pdata->dma_filter, pdata->rx_param, dev, "rx");
 	if (!drv_data->rx_chan) {
 		dma_release_channel(drv_data->tx_chan);
 		drv_data->tx_chan = NULL;
diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index 20ebbc7..0424b67 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -10,6 +10,9 @@ 
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 
+#include <linux/dmaengine.h>
+#include <linux/platform_data/dma-dw.h>
+
 enum {
 	PORT_CE4100,
 	PORT_BYT,
@@ -19,33 +22,41 @@  struct pxa_spi_info {
 	enum pxa_ssp_type type;
 	int port_id;
 	int num_chipselect;
-	int tx_slave_id;
-	int tx_chan_id;
-	int rx_slave_id;
-	int rx_chan_id;
 	unsigned long max_clk_rate;
+
+	/* DMA channel request parameters */
+	void *tx_param;
+	void *rx_param;
 };
 
+static struct dw_dma_slave byt_tx_param = { .dst_id = 0 };
+static struct dw_dma_slave byt_rx_param = { .src_id = 1 };
+
+static bool lpss_dma_filter(struct dma_chan *chan, void *param)
+{
+	struct dw_dma_slave *dws = param;
+
+	if (dws->dma_dev != chan->device->dev)
+		return false;
+
+	chan->private = dws;
+	return true;
+}
+
 static struct pxa_spi_info spi_info_configs[] = {
 	[PORT_CE4100] = {
 		.type = PXA25x_SSP,
 		.port_id =  -1,
 		.num_chipselect = -1,
-		.tx_slave_id = -1,
-		.tx_chan_id = -1,
-		.rx_slave_id = -1,
-		.rx_chan_id = -1,
 		.max_clk_rate = 3686400,
 	},
 	[PORT_BYT] = {
 		.type = LPSS_SSP,
 		.port_id = 0,
 		.num_chipselect = 1,
-		.tx_slave_id = 0,
-		.tx_chan_id = 0,
-		.rx_slave_id = 1,
-		.rx_chan_id = 1,
 		.max_clk_rate = 50000000,
+		.tx_param = &byt_tx_param,
+		.rx_param = &byt_rx_param,
 	},
 };
 
@@ -59,6 +70,7 @@  static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
 	struct ssp_device *ssp;
 	struct pxa_spi_info *c;
 	char buf[40];
+	struct pci_dev *dma_dev;
 
 	ret = pcim_enable_device(dev);
 	if (ret)
@@ -73,11 +85,29 @@  static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
 	memset(&spi_pdata, 0, sizeof(spi_pdata));
 	spi_pdata.num_chipselect = (c->num_chipselect > 0) ?
 					c->num_chipselect : dev->devfn;
-	spi_pdata.tx_slave_id = c->tx_slave_id;
-	spi_pdata.tx_chan_id = c->tx_chan_id;
-	spi_pdata.rx_slave_id = c->rx_slave_id;
-	spi_pdata.rx_chan_id = c->rx_chan_id;
-	spi_pdata.enable_dma = c->rx_slave_id >= 0 && c->tx_slave_id >= 0;
+
+	dma_dev = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
+
+	if (c->tx_param) {
+		struct dw_dma_slave *slave = c->tx_param;
+
+		slave->dma_dev = &dma_dev->dev;
+		slave->src_master = 1;
+		slave->dst_master = 0;
+	}
+
+	if (c->rx_param) {
+		struct dw_dma_slave *slave = c->rx_param;
+
+		slave->dma_dev = &dma_dev->dev;
+		slave->src_master = 1;
+		slave->dst_master = 0;
+	}
+
+	spi_pdata.dma_filter = lpss_dma_filter;
+	spi_pdata.tx_param = c->tx_param;
+	spi_pdata.rx_param = c->rx_param;
+	spi_pdata.enable_dma = c->rx_param && c->tx_param;
 
 	ssp = &spi_pdata.ssp;
 	ssp->phys_base = pci_resource_start(dev, 0);
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index fe79210..256c0ab 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1062,8 +1062,6 @@  pxa2xx_spi_acpi_get_pdata(struct platform_device *pdev)
 
 	pdata->num_chipselect = 1;
 	pdata->enable_dma = true;
-	pdata->tx_chan_id = -1;
-	pdata->rx_chan_id = -1;
 
 	return pdata;
 }
diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h
index 82d5111..d5a3165 100644
--- a/include/linux/spi/pxa2xx_spi.h
+++ b/include/linux/spi/pxa2xx_spi.h
@@ -23,6 +23,8 @@ 
 #define PXA2XX_CS_ASSERT (0x01)
 #define PXA2XX_CS_DEASSERT (0x02)
 
+struct dma_chan;
+
 /* device.platform_data for SSP controller devices */
 struct pxa2xx_spi_master {
 	u32 clock_enable;
@@ -30,10 +32,9 @@  struct pxa2xx_spi_master {
 	u8 enable_dma;
 
 	/* DMA engine specific config */
-	int rx_chan_id;
-	int tx_chan_id;
-	int rx_slave_id;
-	int tx_slave_id;
+	bool (*dma_filter)(struct dma_chan *chan, void *param);
+	void *tx_param;
+	void *rx_param;
 
 	/* For non-PXA arches */
 	struct ssp_device ssp;