diff mbox

dmaengine: pl08x: Define capabilities for generic capabilities reporting

Message ID 1426634736-11784-1-git-send-email-broonie@kernel.org (mailing list archive)
State Accepted
Headers show

Commit Message

Mark Brown March 17, 2015, 11:25 p.m. UTC 
Ensure that clients can automatically configure themselves and avoid a
nasty warning at boot by providing capability information.

Signed-off-by: Mark Brown <broonie@kernel.org>
---
 drivers/dma/amba-pl08x.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Vinod Koul March 18, 2015, 4:04 p.m. UTC | #1 
On Tue, Mar 17, 2015 at 11:25:36PM +0000, Mark Brown wrote:
> Ensure that clients can automatically configure themselves and avoid a
> nasty warning at boot by providing capability information.
> 
Applied, thanks
diff mbox

Patch

diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index 4a5fd245014e..83aa55d6fa5d 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -97,6 +97,12 @@ 
 
 #define DRIVER_NAME	"pl08xdmac"
 
+#define PL80X_DMA_BUSWIDTHS \
+	BIT(DMA_SLAVE_BUSWIDTH_UNDEFINED) | \
+	BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
+	BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
+	BIT(DMA_SLAVE_BUSWIDTH_4_BYTES)
+
 static struct amba_driver pl08x_amba_driver;
 struct pl08x_driver_data;
 
@@ -2070,6 +2076,10 @@  static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 	pl08x->memcpy.device_pause = pl08x_pause;
 	pl08x->memcpy.device_resume = pl08x_resume;
 	pl08x->memcpy.device_terminate_all = pl08x_terminate_all;
+	pl08x->memcpy.src_addr_widths = PL80X_DMA_BUSWIDTHS;
+	pl08x->memcpy.dst_addr_widths = PL80X_DMA_BUSWIDTHS;
+	pl08x->memcpy.directions = BIT(DMA_MEM_TO_MEM);
+	pl08x->memcpy.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
 
 	/* Initialize slave engine */
 	dma_cap_set(DMA_SLAVE, pl08x->slave.cap_mask);
@@ -2086,6 +2096,10 @@  static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
 	pl08x->slave.device_pause = pl08x_pause;
 	pl08x->slave.device_resume = pl08x_resume;
 	pl08x->slave.device_terminate_all = pl08x_terminate_all;
+	pl08x->slave.src_addr_widths = PL80X_DMA_BUSWIDTHS;
+	pl08x->slave.dst_addr_widths = PL80X_DMA_BUSWIDTHS;
+	pl08x->slave.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+	pl08x->slave.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
 
 	/* Get the platform data */
 	pl08x->pd = dev_get_platdata(&adev->dev);