| Message ID | 1436529553-30571-3-git-send-email-geert+renesas@glider.be (mailing list archive) |
|---|---|
| State | RFC |
| Headers | show |
Hi Geert, Thank you for the patch. On Friday 10 July 2015 13:59:12 Geert Uytterhoeven wrote: > If a driver does "dma_cap_set(DMA_MEMCPY), ...)", it should advertise > DMA_MEM_TO_MEM support in the direction mask. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > Is it true that DMA_MEMCPY implies DMA_MEM_TO_MEM? The directions field is defined as * @directions: bit mask of slave direction the channel supported * since the enum dma_transfer_direction is not defined as bits for each * type of direction, the dma controller should fill (1 << <TYPE>) and same * should be checked by controller as well Memory-to-memory transfer isn't a DMA slave capability, so I don't think the directions field should report BIT(DMA_MEM_TO_MEM). > --- > drivers/dma/sh/rcar-dmac.c | 3 ++- > drivers/dma/sh/rcar-hpbdma.c | 3 ++- > drivers/dma/sh/shdmac.c | 4 +++- > 3 files changed, 7 insertions(+), 3 deletions(-) > > diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c > index 7820d07e7beea7dd..11e5003a6cc27b40 100644 > --- a/drivers/dma/sh/rcar-dmac.c > +++ b/drivers/dma/sh/rcar-dmac.c > @@ -1707,7 +1707,8 @@ static int rcar_dmac_probe(struct platform_device > *pdev) > > engine->src_addr_widths = widths; > engine->dst_addr_widths = widths; > - engine->directions = BIT(DMA_MEM_TO_DEV) | BIT(DMA_DEV_TO_MEM); > + engine->directions = BIT(DMA_MEM_TO_MEM) | BIT(DMA_MEM_TO_DEV) | > + BIT(DMA_DEV_TO_MEM); > engine->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; > > engine->device_alloc_chan_resources = rcar_dmac_alloc_chan_resources; > diff --git a/drivers/dma/sh/rcar-hpbdma.c b/drivers/dma/sh/rcar-hpbdma.c > index 2e21c1197769d0c8..29d67277415084b4 100644 > --- a/drivers/dma/sh/rcar-hpbdma.c > +++ b/drivers/dma/sh/rcar-hpbdma.c > @@ -599,7 +599,8 @@ static int hpb_dmae_probe(struct platform_device *pdev) > dma_cap_set(DMA_SLAVE, dma_dev->cap_mask); > dma_dev->src_addr_widths = widths; > dma_dev->dst_addr_widths = widths; > - dma_dev->directions = BIT(DMA_MEM_TO_DEV) | BIT(DMA_DEV_TO_MEM); > + dma_dev->directions = BIT(DMA_MEM_TO_MEM) | BIT(DMA_MEM_TO_DEV) | > + BIT(DMA_DEV_TO_MEM); > dma_dev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; > > hpbdev->shdma_dev.ops = &hpb_dmae_ops; > diff --git a/drivers/dma/sh/shdmac.c b/drivers/dma/sh/shdmac.c > index c9489ae6c0fa7f47..8693fff83d7b3af4 100644 > --- a/drivers/dma/sh/shdmac.c > +++ b/drivers/dma/sh/shdmac.c > @@ -750,8 +750,10 @@ static int sh_dmae_probe(struct platform_device *pdev) > dma_dev->directions = BIT(DMA_MEM_TO_DEV) | BIT(DMA_DEV_TO_MEM); > dma_dev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; > > - if (!pdata->slave_only) > + if (!pdata->slave_only) { > dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask); > + dma_dev->directions |= BIT(DMA_MEM_TO_MEM); > + } > if (pdata->slave && pdata->slave_num) > dma_cap_set(DMA_SLAVE, dma_dev->cap_mask);
diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c index 7820d07e7beea7dd..11e5003a6cc27b40 100644 --- a/drivers/dma/sh/rcar-dmac.c +++ b/drivers/dma/sh/rcar-dmac.c @@ -1707,7 +1707,8 @@ static int rcar_dmac_probe(struct platform_device *pdev) engine->src_addr_widths = widths; engine->dst_addr_widths = widths; - engine->directions = BIT(DMA_MEM_TO_DEV) | BIT(DMA_DEV_TO_MEM); + engine->directions = BIT(DMA_MEM_TO_MEM) | BIT(DMA_MEM_TO_DEV) | + BIT(DMA_DEV_TO_MEM); engine->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; engine->device_alloc_chan_resources = rcar_dmac_alloc_chan_resources; diff --git a/drivers/dma/sh/rcar-hpbdma.c b/drivers/dma/sh/rcar-hpbdma.c index 2e21c1197769d0c8..29d67277415084b4 100644 --- a/drivers/dma/sh/rcar-hpbdma.c +++ b/drivers/dma/sh/rcar-hpbdma.c @@ -599,7 +599,8 @@ static int hpb_dmae_probe(struct platform_device *pdev) dma_cap_set(DMA_SLAVE, dma_dev->cap_mask); dma_dev->src_addr_widths = widths; dma_dev->dst_addr_widths = widths; - dma_dev->directions = BIT(DMA_MEM_TO_DEV) | BIT(DMA_DEV_TO_MEM); + dma_dev->directions = BIT(DMA_MEM_TO_MEM) | BIT(DMA_MEM_TO_DEV) | + BIT(DMA_DEV_TO_MEM); dma_dev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; hpbdev->shdma_dev.ops = &hpb_dmae_ops; diff --git a/drivers/dma/sh/shdmac.c b/drivers/dma/sh/shdmac.c index c9489ae6c0fa7f47..8693fff83d7b3af4 100644 --- a/drivers/dma/sh/shdmac.c +++ b/drivers/dma/sh/shdmac.c @@ -750,8 +750,10 @@ static int sh_dmae_probe(struct platform_device *pdev) dma_dev->directions = BIT(DMA_MEM_TO_DEV) | BIT(DMA_DEV_TO_MEM); dma_dev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; - if (!pdata->slave_only) + if (!pdata->slave_only) { dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask); + dma_dev->directions |= BIT(DMA_MEM_TO_MEM); + } if (pdata->slave && pdata->slave_num) dma_cap_set(DMA_SLAVE, dma_dev->cap_mask);
If a driver does "dma_cap_set(DMA_MEMCPY), ...)", it should advertise DMA_MEM_TO_MEM support in the direction mask. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- Is it true that DMA_MEMCPY implies DMA_MEM_TO_MEM? --- drivers/dma/sh/rcar-dmac.c | 3 ++- drivers/dma/sh/rcar-hpbdma.c | 3 ++- drivers/dma/sh/shdmac.c | 4 +++- 3 files changed, 7 insertions(+), 3 deletions(-)