From patchwork Tue Mar 8 08:03:59 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Lothar_Wa=C3=9Fmann?= X-Patchwork-Id: 8530451 Return-Path: X-Original-To: patchwork-dmaengine@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id B918BC0553 for ; Tue, 8 Mar 2016 08:07:14 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id AC71B200DC for ; Tue, 8 Mar 2016 08:07:13 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 8E08F20155 for ; Tue, 8 Mar 2016 08:07:12 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754192AbcCHIGk (ORCPT ); Tue, 8 Mar 2016 03:06:40 -0500 Received: from mail.karo-electronics.de ([81.173.242.67]:64640 "EHLO mail.karo-electronics.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754117AbcCHIGO (ORCPT ); Tue, 8 Mar 2016 03:06:14 -0500 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= To: Dan Williams , Ian Campbell , Kumar Gala , Mark Rutland , Pawel Moll , Rob Herring , Russell King , Sascha Hauer , Shawn Guo , Vinod Koul , devicetree@vger.kernel.org, dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Subject: [PATCHv2 3/8] ARM: dts: imx6-tx6: remove regulator bus Date: Tue, 8 Mar 2016 09:03:59 +0100 Message-Id: <1457424244-14549-4-git-send-email-LW@KARO-electronics.de> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1457424244-14549-1-git-send-email-LW@KARO-electronics.de> References: <1457424244-14549-1-git-send-email-LW@KARO-electronics.de> MIME-Version: 1.0 Sender: dmaengine-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: dmaengine@vger.kernel.org X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=ham version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP DT maintainers don't like the 'simple-bus' container around the regulator nodes. So remove it. Signed-off-by: Lothar Waßmann --- arch/arm/boot/dts/imx6qdl-tx6.dtsi | 178 +++++++++++++++++-------------------- 1 file changed, 81 insertions(+), 97 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi index 912f284..ec374f5 100644 --- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -97,104 +97,88 @@ }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + reg_3v3_etn: reg-3v3-etn { + compatible = "regulator-fixed"; + regulator-name = "3V3_ETN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etnphy_power>; + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - reg_3v3_etn: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3V3_ETN"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_etnphy_power>; - gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_2v5: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "2V5"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - reg_3v3: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "3V3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - reg_can_xcvr: regulator@3 { - compatible = "regulator-fixed"; - reg = <3>; - regulator-name = "CAN XCVR"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flexcan_xcvr>; - gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; - enable-active-low; - }; - - reg_lcd0_pwr: regulator@4 { - compatible = "regulator-fixed"; - reg = <4>; - regulator-name = "LCD0 POWER"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd0_pwr>; - gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - regulator-always-on; - }; - - reg_lcd1_pwr: regulator@5 { - compatible = "regulator-fixed"; - reg = <5>; - regulator-name = "LCD1 POWER"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd1_pwr>; - gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-boot-on; - regulator-always-on; - }; - - reg_usbh1_vbus: regulator@6 { - compatible = "regulator-fixed"; - reg = <6>; - regulator-name = "usbh1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbh1_vbus>; - gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; - - reg_usbotg_vbus: regulator@7 { - compatible = "regulator-fixed"; - reg = <7>; - regulator-name = "usbotg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg_vbus>; - gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; - enable-active-high; - }; + reg_2v5: reg-2v5 { + compatible = "regulator-fixed"; + regulator-name = "2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3v3: reg-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_can_xcvr: reg-can-xcvr { + compatible = "regulator-fixed"; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan_xcvr>; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + enable-active-low; + }; + + reg_lcd0_pwr: reg-lcd0-pwr { + compatible = "regulator-fixed"; + regulator-name = "LCD0 POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_pwr>; + gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + reg_lcd1_pwr: reg-lcd1-pwr { + compatible = "regulator-fixed"; + regulator-name = "LCD1 POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd1_pwr>; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; + + reg_usbh1_vbus: reg-usbh1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbotg_vbus: reg-usbotg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; }; sound {