diff mbox

dt-bindings: rcar-dmac: Document missing error interrupt

Message ID 1495178867-817-1-git-send-email-geert+renesas@glider.be (mailing list archive)
State Accepted
Headers show

Commit Message

Geert Uytterhoeven May 19, 2017, 7:27 a.m. UTC
The documentation for the "interrupt-names" property only mentions the
per-channel interrupts, while the error interrupt has always been
mandatory, too.

Fixes: 10f5c8438475909a ("dmaengine: rcar-dmac: Add device tree bindings
documentation")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

Comments

Niklas Söderlund May 19, 2017, 9:05 a.m. UTC | #1
Hi Geert,

On 2017-05-19 09:27:47 +0200, Geert Uytterhoeven wrote:
> The documentation for the "interrupt-names" property only mentions the
> per-channel interrupts, while the error interrupt has always been
> mandatory, too.
> 
> Fixes: 10f5c8438475909a ("dmaengine: rcar-dmac: Add device tree bindings
> documentation")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
>  Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
> index 3316a9c2e638b98c..79a204d50234f287 100644
> --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
> +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
> @@ -30,8 +30,9 @@ Required Properties:
>  
>  - interrupts: interrupt specifiers for the DMAC, one for each entry in
>    interrupt-names.
> -- interrupt-names: one entry per channel, named "ch%u", where %u is the
> -  channel number ranging from zero to the number of channels minus one.
> +- interrupt-names: one entry for the error interrupt, named "error", plus one
> +  entry per channel, named "ch%u", where %u is the channel number ranging from
> +  zero to the number of channels minus one.

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

>  
>  - clock-names: "fck" for the functional clock
>  - clocks: a list of phandle + clock-specifier pairs, one for each entry
> -- 
> 2.7.4
>
Vinod Koul May 19, 2017, 9:28 a.m. UTC | #2
On Fri, May 19, 2017 at 09:27:47AM +0200, Geert Uytterhoeven wrote:
> The documentation for the "interrupt-names" property only mentions the
> per-channel interrupts, while the error interrupt has always been
> mandatory, too.

Applied, thanks
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
index 3316a9c2e638b98c..79a204d50234f287 100644
--- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
@@ -30,8 +30,9 @@  Required Properties:
 
 - interrupts: interrupt specifiers for the DMAC, one for each entry in
   interrupt-names.
-- interrupt-names: one entry per channel, named "ch%u", where %u is the
-  channel number ranging from zero to the number of channels minus one.
+- interrupt-names: one entry for the error interrupt, named "error", plus one
+  entry per channel, named "ch%u", where %u is the channel number ranging from
+  zero to the number of channels minus one.
 
 - clock-names: "fck" for the functional clock
 - clocks: a list of phandle + clock-specifier pairs, one for each entry