[v4,09/14] dmaengine: imx-sdma: remove ERR009165 on i.mx6ul

Commit Message

Robin Gong May 22, 2019, 10 a.m. UTC

ECSPI issue fixed from i.mx6ul at hardware level, no need
ERR009165 anymore on those chips such as i.mx8mq. Add i.mx6sx
from where i.mx6ul source.

Signed-off-by: Robin Gong <[e-mail]>
Acked-by: Vinod Koul <[e-mail]>
---
 drivers/dma/imx-sdma.c | 51 +++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 50 insertions(+), 1 deletion(-)

Patch

diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index 352b0d5..a495c7f 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -419,6 +419,13 @@  struct sdma_driver_data {
 	int num_events;
 	struct sdma_script_start_addrs	*script_addrs;
 	bool check_ratio;
+	/*
+	 * ecspi ERR009165 fixed should be done in sdma script
+	 * and it has been fixed in soc from i.mx6ul.
+	 * please get more information from the below link:
+	 * https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+	 */
+	bool ecspi_fixed;
 };
 
 struct sdma_engine {
@@ -539,6 +546,31 @@  static struct sdma_driver_data sdma_imx6q = {
 	.script_addrs = &sdma_script_imx6q,
 };
 
+static struct sdma_script_start_addrs sdma_script_imx6sx = {
+	.ap_2_ap_addr = 642,
+	.uart_2_mcu_addr = 817,
+	.mcu_2_app_addr = 747,
+	.uartsh_2_mcu_addr = 1032,
+	.mcu_2_shp_addr = 960,
+	.app_2_mcu_addr = 683,
+	.shp_2_mcu_addr = 891,
+	.spdif_2_mcu_addr = 1100,
+	.mcu_2_spdif_addr = 1134,
+};
+
+static struct sdma_driver_data sdma_imx6sx = {
+	.chnenbl0 = SDMA_CHNENBL0_IMX35,
+	.num_events = 48,
+	.script_addrs = &sdma_script_imx6sx,
+};
+
+static struct sdma_driver_data sdma_imx6ul = {
+	.chnenbl0 = SDMA_CHNENBL0_IMX35,
+	.num_events = 48,
+	.script_addrs = &sdma_script_imx6sx,
+	.ecspi_fixed = true,
+};
+
 static struct sdma_script_start_addrs sdma_script_imx7d = {
 	.ap_2_ap_addr = 644,
 	.uart_2_mcu_addr = 819,
@@ -584,9 +616,15 @@  static const struct platform_device_id sdma_devtypes[] = {
 		.name = "imx6q-sdma",
 		.driver_data = (unsigned long)&sdma_imx6q,
 	}, {
+		.name = "imx6sx-sdma",
+		.driver_data = (unsigned long)&sdma_imx6sx,
+	}, {
 		.name = "imx7d-sdma",
 		.driver_data = (unsigned long)&sdma_imx7d,
 	}, {
+		.name = "imx6ul-sdma",
+		.driver_data = (unsigned long)&sdma_imx6ul,
+	}, {
 		.name = "imx8mq-sdma",
 		.driver_data = (unsigned long)&sdma_imx8mq,
 	}, {
@@ -602,7 +640,9 @@  static const struct of_device_id sdma_dt_ids[] = {
 	{ .compatible = "fsl,imx35-sdma", .data = &sdma_imx35, },
 	{ .compatible = "fsl,imx31-sdma", .data = &sdma_imx31, },
 	{ .compatible = "fsl,imx25-sdma", .data = &sdma_imx25, },
+	{ .compatible = "fsl,imx6sx-sdma", .data = &sdma_imx6sx, },
 	{ .compatible = "fsl,imx7d-sdma", .data = &sdma_imx7d, },
+	{ .compatible = "fsl,imx6ul-sdma", .data = &sdma_imx6ul, },
 	{ .compatible = "fsl,imx8mq-sdma", .data = &sdma_imx8mq, },
 	{ /* sentinel */ }
 };
@@ -1166,8 +1206,17 @@  static int sdma_config_channel(struct dma_chan *chan)
 			if (sdmac->peripheral_type == IMX_DMATYPE_ASRC_SP ||
 			    sdmac->peripheral_type == IMX_DMATYPE_ASRC)
 				sdma_set_watermarklevel_for_p2p(sdmac);
-		} else
+		} else {
+			/*
+			 * ERR009165 fixed from i.mx6ul, no errata need,
+			 * set bit31 to let sdma script skip the errata.
+			 */
+			if (sdmac->peripheral_type == IMX_DMATYPE_CSPI &&
+			    sdmac->direction == DMA_MEM_TO_DEV &&
+			    sdmac->sdma->drvdata->ecspi_fixed)
+				__set_bit(31, &sdmac->watermark_level);
 			__set_bit(sdmac->event_id0, sdmac->event_mask);
+		}
 
 		/* Address */
 		sdmac->shp_addr = sdmac->per_address;