@@ -198,12 +198,12 @@ struct sdma_script_start_addrs {
s32 per_2_firi_addr;
s32 mcu_2_firi_addr;
s32 uart_2_per_addr;
- s32 uart_2_mcu_addr;
+ s32 uart_2_mcu_ram_addr;
s32 per_2_app_addr;
s32 mcu_2_app_addr;
s32 per_2_per_addr;
s32 uartsh_2_per_addr;
- s32 uartsh_2_mcu_addr;
+ s32 uartsh_2_mcu_ram_addr;
s32 per_2_shp_addr;
s32 mcu_2_shp_addr;
s32 ata_2_mcu_addr;
@@ -230,6 +230,10 @@ struct sdma_script_start_addrs {
s32 zcanfd_2_mcu_addr;
s32 zqspi_2_mcu_addr;
s32 mcu_2_ecspi_addr;
+ s32 mcu_2_sai_addr;
+ s32 sai_2_mcu_addr;
+ s32 uart_2_mcu_addr;
+ s32 uartsh_2_mcu_addr;
/* End of v3 array */
s32 mcu_2_zqspi_addr;
/* End of v4 array */
@@ -1749,8 +1753,8 @@ static void sdma_issue_pending(struct dma_chan *chan)
#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1 34
#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V2 38
-#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 41
-#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4 42
+#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 45
+#define SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V4 46
static void sdma_add_scripts(struct sdma_engine *sdma,
const struct sdma_script_start_addrs *addr)
@@ -1774,6 +1778,19 @@ static void sdma_add_scripts(struct sdma_engine *sdma,
for (i = 0; i < sdma->script_number; i++)
if (addr_arr[i] > 0)
saddr_arr[i] = addr_arr[i];
+
+ /*
+ * get uart_2_mcu_addr/uartsh_2_mcu_addr rom script specially because
+ * they are now replaced by uart_2_mcu_ram_addr/uartsh_2_mcu_ram_addr
+ * to be compatible with legacy freescale/nxp sdma firmware, and they
+ * are located in the bottom part of sdma_script_start_addrs which are
+ * beyond the SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1.
+ */
+ if (addr->uart_2_mcu_addr)
+ sdma->script_addrs->uart_2_mcu_addr = addr->uart_2_mcu_addr;
+ if (addr->uartsh_2_mcu_addr)
+ sdma->script_addrs->uartsh_2_mcu_addr = addr->uartsh_2_mcu_addr;
+
}
static void sdma_load_firmware(const struct firmware *fw, void *context)
For the compatibility of NXP internal legacy kernel before 4.19 which is based on uart ram script and upstreaming kernel based on uart rom script, add both uart ram/rom script in latest sdma firmware. By default uart rom script used. Besides, add two multi-fifo scripts for SAI/PDM on i.mx8m/8mm and add back qspi script miss for v4(i.mx7d/8m/8mm family, but v3 is for i.mx6). rom script: uart_2_mcu_addr uartsh_2_mcu_addr /* through spba bus */ am script: uart_2_mcu_ram_addr uartsh_2_mcu_ram_addr /* through spba bus */ Please get latest sdma firmware from the below and put them into the path (/lib/firmware/imx/sdma/): https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git /tree/imx/sdma Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Vinod Koul <vkoul@kernel.org> --- drivers/dma/imx-sdma.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-)