diff mbox series

[net-next,v5,02/10] dt-bindings: dmaengine: xilinx_dma: Add xlnx,irq-delay property

Message ID 1691387509-2113129-3-git-send-email-radhey.shyam.pandey@amd.com (mailing list archive)
State Accepted
Commit e8cfa385054c6aa7ae8dd743d8ea980039a0fc0b
Headers show
Series net: axienet: Introduce dmaengine | expand

Commit Message

Pandey, Radhey Shyam Aug. 7, 2023, 5:51 a.m. UTC 
Add an optional AXI DMA property 'xlnx,irq-delay'. It specifies interrupt
timeout value and causes the DMA engine to generate an interrupt after the
delay time period has expired. Timer begins counting at the end of a packet
and resets with receipt of a new packet or a timeout event occurs.

This property is useful when AXI DMA is connected to the streaming IP i.e
axiethernet where inter packet latency is critical while still taking the
benefit of interrupt coalescing.

Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Rob Herring <robh@kernel.org>
---
Changes for v5:
- New patch in this series. Just a note that dmaengine series
  was earlier sent as separate series[1] and now it's merged
  with axiethernet series[2].
  [1]: https://lore.kernel.org/all/20221124102745.2620370-1-sarath.babu.naidu.gaddam@amd.com
  [2]: https://lore.kernel.org/all/20230630053844.1366171-1-sarath.babu.naidu.gaddam@amd.com
- Switch to amd.com email address.
---
 Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
index fea5b09a439d..590d1948f202 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -52,7 +52,9 @@  Optional properties for AXI DMA and MCDMA:
 
 Optional properties for AXI DMA:
 - xlnx,axistream-connected: Tells whether DMA is connected to AXI stream IP.
-
+- xlnx,irq-delay: Tells the interrupt delay timeout value. Valid range is from
+	0-255. Setting this value to zero disables the delay timer interrupt.
+	1 timeout interval = 125 * clock period of SG clock.
 Optional properties for VDMA:
 - xlnx,flush-fsync: Tells which channel to Flush on Frame sync.
 	It takes following values: