| Message ID | 20140417143249.095049101@linutronix.de (mailing list archive) |
|---|---|
| State | Superseded |
| Delegated to: | Vinod Koul |
| Headers | show |
Hi Thomas, On 04/17/2014 09:40 AM, Thomas Gleixner wrote: > The residue reporting in edma_tx_status() is just broken. It blindly > walks the psets and recalculates the lenght of the transfer from the > hardware parameters. For cyclic transfers it adds the link pset, which > results in interestingly large residues. For non-cyclic it adds the > dummy pset, which is stupid as well. > Aside of that it's silly to walk through the pset params when the per > descriptor residue is known at the point of creating it. Yes this bit had to be rewritten, after we added support to DMA SGs. Thanks. It was written before I took over the driver ;-) > > Store the information in edma_desc and use it. > > Signed-off-by: Thomas Gleixner <tglx@linutronix.de> > --- > drivers/dma/edma.c | 34 +++++++++------------------------- > 1 file changed, 9 insertions(+), 25 deletions(-) > > Index: linux-2.6/drivers/dma/edma.c > =================================================================== > --- linux-2.6.orig/drivers/dma/edma.c > +++ linux-2.6/drivers/dma/edma.c > @@ -64,6 +64,7 @@ struct edma_desc { > int absync; > int pset_nr; > int processed; > + u32 residue; > struct edmacc_param pset[0]; > }; > > @@ -416,6 +417,7 @@ static struct dma_async_tx_descriptor *e > } > > edesc->pset_nr = sg_len; > + edesc->residue = 0; > > /* Allocate a PaRAM slot, if needed */ > nslots = min_t(unsigned, MAX_NR_SG, sg_len); > @@ -450,6 +452,7 @@ static struct dma_async_tx_descriptor *e > } > > edesc->absync = ret; > + edesc->residue += sg_dma_len(sg); > > /* If this is the last in a current SG set of transactions, > enable interrupts so that next set is processed */ > @@ -527,6 +530,7 @@ static struct dma_async_tx_descriptor *e > > edesc->cyclic = 1; > edesc->pset_nr = nslots; > + edesc->residue = buf_len; > > dev_dbg(dev, "%s: nslots=%d\n", __func__, nslots); > dev_dbg(dev, "%s: period_len=%d\n", __func__, period_len); > @@ -622,6 +626,7 @@ static void edma_callback(unsigned ch_nu > vchan_cyclic_callback(&edesc->vdesc); > } else if (edesc->processed == edesc->pset_nr) { > dev_dbg(dev, "Transfer complete, stopping channel %d\n", ch_num); > + edesc->residue = 0; > edma_stop(echan->ch_num); > vchan_cookie_complete(&edesc->vdesc); > edma_execute(echan); > @@ -754,25 +759,6 @@ static void edma_issue_pending(struct dm > spin_unlock_irqrestore(&echan->vchan.lock, flags); > } > > -static size_t edma_desc_size(struct edma_desc *edesc) > -{ > - int i; > - size_t size; > - > - if (edesc->absync) > - for (size = i = 0; i < edesc->pset_nr; i++) > - size += (edesc->pset[i].a_b_cnt & 0xffff) * > - (edesc->pset[i].a_b_cnt >> 16) * > - edesc->pset[i].ccnt; > - else > - size = (edesc->pset[0].a_b_cnt & 0xffff) * > - (edesc->pset[0].a_b_cnt >> 16) + > - (edesc->pset[0].a_b_cnt & 0xffff) * > - (SZ_64K - 1) * edesc->pset[0].ccnt; > - > - return size; > -} > - > /* Check request completion status */ > static enum dma_status edma_tx_status(struct dma_chan *chan, > dma_cookie_t cookie, > @@ -789,12 +775,10 @@ static enum dma_status edma_tx_status(st > > spin_lock_irqsave(&echan->vchan.lock, flags); > vdesc = vchan_find_desc(&echan->vchan, cookie); > - if (vdesc) { > - txstate->residue = edma_desc_size(to_edma_desc(&vdesc->tx)); > - } else if (echan->edesc && echan->edesc->vdesc.tx.cookie == cookie) { > - struct edma_desc *edesc = echan->edesc; > - txstate->residue = edma_desc_size(edesc); > - } > + if (vdesc) > + txstate->residue = to_edma_desc(&vdesc->tx)->residue; > + else if (echan->edesc && echan->edesc->vdesc.tx.cookie == cookie) > + txstate->residue = echan->edesc->residue; > spin_unlock_irqrestore(&echan->vchan.lock, flags); > > return ret; Peter, its ok, can you ensure this works for Audio (snd_dmaengine_pcm_pointer) users of EDMA (unless Thomas may already have). Looks fine to me otherwise, Reviewed-by: Joel Fernandes <joelf@ti.com> thanks, -Joel -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Index: linux-2.6/drivers/dma/edma.c =================================================================== --- linux-2.6.orig/drivers/dma/edma.c +++ linux-2.6/drivers/dma/edma.c @@ -64,6 +64,7 @@ struct edma_desc { int absync; int pset_nr; int processed; + u32 residue; struct edmacc_param pset[0]; }; @@ -416,6 +417,7 @@ static struct dma_async_tx_descriptor *e } edesc->pset_nr = sg_len; + edesc->residue = 0; /* Allocate a PaRAM slot, if needed */ nslots = min_t(unsigned, MAX_NR_SG, sg_len); @@ -450,6 +452,7 @@ static struct dma_async_tx_descriptor *e } edesc->absync = ret; + edesc->residue += sg_dma_len(sg); /* If this is the last in a current SG set of transactions, enable interrupts so that next set is processed */ @@ -527,6 +530,7 @@ static struct dma_async_tx_descriptor *e edesc->cyclic = 1; edesc->pset_nr = nslots; + edesc->residue = buf_len; dev_dbg(dev, "%s: nslots=%d\n", __func__, nslots); dev_dbg(dev, "%s: period_len=%d\n", __func__, period_len); @@ -622,6 +626,7 @@ static void edma_callback(unsigned ch_nu vchan_cyclic_callback(&edesc->vdesc); } else if (edesc->processed == edesc->pset_nr) { dev_dbg(dev, "Transfer complete, stopping channel %d\n", ch_num); + edesc->residue = 0; edma_stop(echan->ch_num); vchan_cookie_complete(&edesc->vdesc); edma_execute(echan); @@ -754,25 +759,6 @@ static void edma_issue_pending(struct dm spin_unlock_irqrestore(&echan->vchan.lock, flags); } -static size_t edma_desc_size(struct edma_desc *edesc) -{ - int i; - size_t size; - - if (edesc->absync) - for (size = i = 0; i < edesc->pset_nr; i++) - size += (edesc->pset[i].a_b_cnt & 0xffff) * - (edesc->pset[i].a_b_cnt >> 16) * - edesc->pset[i].ccnt; - else - size = (edesc->pset[0].a_b_cnt & 0xffff) * - (edesc->pset[0].a_b_cnt >> 16) + - (edesc->pset[0].a_b_cnt & 0xffff) * - (SZ_64K - 1) * edesc->pset[0].ccnt; - - return size; -} - /* Check request completion status */ static enum dma_status edma_tx_status(struct dma_chan *chan, dma_cookie_t cookie, @@ -789,12 +775,10 @@ static enum dma_status edma_tx_status(st spin_lock_irqsave(&echan->vchan.lock, flags); vdesc = vchan_find_desc(&echan->vchan, cookie); - if (vdesc) { - txstate->residue = edma_desc_size(to_edma_desc(&vdesc->tx)); - } else if (echan->edesc && echan->edesc->vdesc.tx.cookie == cookie) { - struct edma_desc *edesc = echan->edesc; - txstate->residue = edma_desc_size(edesc); - } + if (vdesc) + txstate->residue = to_edma_desc(&vdesc->tx)->residue; + else if (echan->edesc && echan->edesc->vdesc.tx.cookie == cookie) + txstate->residue = echan->edesc->residue; spin_unlock_irqrestore(&echan->vchan.lock, flags); return ret;
The residue reporting in edma_tx_status() is just broken. It blindly walks the psets and recalculates the lenght of the transfer from the hardware parameters. For cyclic transfers it adds the link pset, which results in interestingly large residues. For non-cyclic it adds the dummy pset, which is stupid as well. Aside of that it's silly to walk through the pset params when the per descriptor residue is known at the point of creating it. Store the information in edma_desc and use it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> --- drivers/dma/edma.c | 34 +++++++++------------------------- 1 file changed, 9 insertions(+), 25 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe dmaengine" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html