diff mbox

[6/6] ARM: dts: Add Gemini DMA controller

Message ID 20170408120457.22750-6-linus.walleij@linaro.org (mailing list archive)
State Changes Requested
Headers show

Commit Message

Linus Walleij April 8, 2017, 12:04 p.m. UTC
This adds the Faraday Technology FTDMAC020 DMA controller to
the Gemini SoC DTSI file. It is only used for memcpy work so
we can activate it for all users of the chipset.

To make the PrimeCell bus work properly we need to add a summy
PCLK clock, as the generic clock framework always gets compiled
in on multiplatform builds.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Vinod: this is just for context, this patch will be directed through
the ARM SoC tree once the rest is done.
---
 arch/arm/boot/dts/gemini.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
index e3fedcb69e2f..468ebdf9e594 100644
--- a/arch/arm/boot/dts/gemini.dtsi
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -8,6 +8,12 @@ 
 #include <dt-bindings/gpio/gpio.h>
 
 / {
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -186,5 +192,21 @@ 
 			syscon = <&syscon>;
 			status = "disabled";
 		};
+
+		dma-controller@67000000 {
+			compatible = "faraday,ftdma020", "arm,pl080", "arm,primecell";
+			/* Faraday Technology FTDMAC020 variant */
+			arm,primecell-periphid = <0x0003b080>;
+			reg = <0x67000000 0x1000>;
+			interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+			/* Bus interface AHB1 (AHB0) is totally tilted */
+			lli-bus-interface-ahb2;
+			mem-bus-interface-ahb2;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			#dma-cells = <2>;
+		};
 	};
 };