@@ -92,6 +92,7 @@
#define JZ_SOC_DATA_PROGRAMMABLE_DMA BIT(1)
#define JZ_SOC_DATA_PER_CHAN_PM BIT(2)
#define JZ_SOC_DATA_NO_DCKES_DCKEC BIT(3)
+#define JZ_SOC_DATA_BREAK_LINKS BIT(4)
/**
* struct jz4780_dma_hwdesc - descriptor structure read by the DMA controller.
@@ -356,6 +357,7 @@ static struct dma_async_tx_descriptor *jz4780_dma_prep_slave_sg(
void *context)
{
struct jz4780_dma_chan *jzchan = to_jz4780_dma_chan(chan);
+ struct jz4780_dma_dev *jzdma = jz4780_dma_chan_parent(jzchan);
struct jz4780_dma_desc *desc;
unsigned int i;
int err;
@@ -376,7 +378,8 @@ static struct dma_async_tx_descriptor *jz4780_dma_prep_slave_sg(
desc->desc[i].dcm |= JZ_DMA_DCM_TIE;
- if (i != (sg_len - 1)) {
+ if (i != (sg_len - 1) &&
+ !(jzdma->soc_data->flags & JZ_SOC_DATA_BREAK_LINKS)) {
/* Automatically proceeed to the next descriptor. */
desc->desc[i].dcm |= JZ_DMA_DCM_LINK;
@@ -665,6 +668,8 @@ static enum dma_status jz4780_dma_tx_status(struct dma_chan *chan,
static bool jz4780_dma_chan_irq(struct jz4780_dma_dev *jzdma,
struct jz4780_dma_chan *jzchan)
{
+ const unsigned int soc_flags = jzdma->soc_data->flags;
+ struct jz4780_dma_desc *desc = jzchan->desc;
uint32_t dcs;
bool ack = true;
@@ -692,8 +697,11 @@ static bool jz4780_dma_chan_irq(struct jz4780_dma_dev *jzdma,
jz4780_dma_begin(jzchan);
} else if (dcs & JZ_DMA_DCS_TT) {
- vchan_cookie_complete(&jzchan->desc->vdesc);
- jzchan->desc = NULL;
+ if (!(soc_flags & JZ_SOC_DATA_BREAK_LINKS) ||
+ (jzchan->curr_hwdesc + 1 == desc->count)) {
+ vchan_cookie_complete(&desc->vdesc);
+ jzchan->desc = NULL;
+ }
jz4780_dma_begin(jzchan);
} else {
@@ -995,6 +1003,7 @@ static int jz4780_dma_remove(struct platform_device *pdev)
static const struct jz4780_dma_soc_data jz4740_dma_soc_data = {
.nb_channels = 6,
.transfer_ord_max = 5,
+ .flags = JZ_SOC_DATA_BREAK_LINKS,
};
static const struct jz4780_dma_soc_data jz4725b_dma_soc_data = {
The current driver works perfectly fine on every generation of the JZ47xx SoCs, except on the JZ4740. There, when hardware descriptors are chained together (with the LINK bit set), the next descriptor isn't automatically fetched as it should - instead, an interrupt is raised, even if the TIE bit (Transfer Interrupt Enable) bit is cleared. When it happens, the DMA transfer seems to be stopped (it doesn't chain), and it's uncertain how many bytes have actually been transferred. Until somebody smarter than me can figure out how to make chained descriptors work on the JZ4740, we now disable chained descriptors on that particular SoC. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- Notes: v2: Add fix for other (non JZ4740) SoCs. drivers/dma/dma-jz4780.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)