From patchwork Tue Jul 30 09:34:43 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Peter Ujfalusi X-Patchwork-Id: 11065319 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 4DBFB912 for ; Tue, 30 Jul 2019 09:35:43 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 3BD4426E3D for ; Tue, 30 Jul 2019 09:35:43 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 2FCEA28789; Tue, 30 Jul 2019 09:35:43 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-8.0 required=2.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI autolearn=ham version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 7854926E3D for ; Tue, 30 Jul 2019 09:35:42 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1731276AbfG3Jf2 (ORCPT ); Tue, 30 Jul 2019 05:35:28 -0400 Received: from lelv0142.ext.ti.com ([198.47.23.249]:46890 "EHLO lelv0142.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730372AbfG3Jf1 (ORCPT ); Tue, 30 Jul 2019 05:35:27 -0400 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by lelv0142.ext.ti.com (8.15.2/8.15.2) with ESMTP id x6U9ZLVM100709; Tue, 30 Jul 2019 04:35:21 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1564479321; bh=eGNzgMdlWaqSP1xWGSDVyQpsKGVc/JfaJSZbr9EwxCo=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=NoAL7B70ICDEh4LhpegPFuJNz+TJUPPtfgo1ND6+3UdY+yvhS0fRr4XEaTzHbmyIH /hnrAqtfzP8O6Pmf0D28aRumIBFs5odo/H7ZRMfjEiNqHBkfrTeaj0Rqs66i2hFPZW KDHTp91lBze8W635LfbVOe4HVcPWVLBqyu5Wk5IU= Received: from DFLE101.ent.ti.com (dfle101.ent.ti.com [10.64.6.22]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id x6U9ZLcP059374 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Tue, 30 Jul 2019 04:35:21 -0500 Received: from DFLE114.ent.ti.com (10.64.6.35) by DFLE101.ent.ti.com (10.64.6.22) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1713.5; Tue, 30 Jul 2019 04:35:21 -0500 Received: from lelv0326.itg.ti.com (10.180.67.84) by DFLE114.ent.ti.com (10.64.6.35) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1713.5 via Frontend Transport; Tue, 30 Jul 2019 04:35:21 -0500 Received: from feketebors.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0326.itg.ti.com (8.15.2/8.15.2) with ESMTP id x6U9YkU4027547; Tue, 30 Jul 2019 04:35:17 -0500 From: Peter Ujfalusi To: , , , CC: , , , , , , , , , Subject: [PATCH v2 07/14] dt-bindings: dma: ti: Add document for K3 UDMA Date: Tue, 30 Jul 2019 12:34:43 +0300 Message-ID: <20190730093450.12664-8-peter.ujfalusi@ti.com> X-Mailer: git-send-email 2.22.0 In-Reply-To: <20190730093450.12664-1-peter.ujfalusi@ti.com> References: <20190730093450.12664-1-peter.ujfalusi@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: dmaengine-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: dmaengine@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP New binding document for Texas Instruments K3 NAVSS Unified DMA – Peripheral Root Complex (UDMA-P). UDMA-P is introduced as part of the K3 architecture and can be found on AM654 and j721e. Signed-off-by: Peter Ujfalusi --- .../devicetree/bindings/dma/ti/k3-udma.txt | 170 ++++++++++++++++++ include/dt-bindings/dma/k3-udma.h | 10 ++ 2 files changed, 180 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-udma.txt create mode 100644 include/dt-bindings/dma/k3-udma.h diff --git a/Documentation/devicetree/bindings/dma/ti/k3-udma.txt b/Documentation/devicetree/bindings/dma/ti/k3-udma.txt new file mode 100644 index 000000000000..7f30fe583ade --- /dev/null +++ b/Documentation/devicetree/bindings/dma/ti/k3-udma.txt @@ -0,0 +1,170 @@ +* Texas Instruments K3 NAVSS Unified DMA – Peripheral Root Complex (UDMA-P) + +The UDMA-P is intended to perform similar (but significantly upgraded) functions +as the packet-oriented DMA used on previous SoC devices. The UDMA-P module +supports the transmission and reception of various packet types. The UDMA-P is +architected to facilitate the segmentation and reassembly of SoC DMA data +structure compliant packets to/from smaller data blocks that are natively +compatible with the specific requirements of each connected peripheral. Multiple +Tx and Rx channels are provided within the DMA which allow multiple segmentation +or reassembly operations to be ongoing. The DMA controller maintains state +information for each of the channels which allows packet segmentation and +reassembly operations to be time division multiplexed between channels in order +to share the underlying DMA hardware. An external DMA scheduler is used to +control the ordering and rate at which this multiplexing occurs for Transmit +operations. The ordering and rate of Receive operations is indirectly controlled +by the order in which blocks are pushed into the DMA on the Rx PSI-L interface. + +The UDMA-P also supports acting as both a UTC and UDMA-C for its internal +channels. Channels in the UDMA-P can be configured to be either Packet-Based or +Third-Party channels on a channel by channel basis. + +Required properties: +-------------------- +- compatible: Should be + "ti,am654-navss-main-udmap" for am654 main NAVSS UDMAP + "ti,am654-navss-mcu-udmap" for am654 mcu NAVSS UDMAP + "ti,j721e-navss-main-udmap" for j721e main NAVSS UDMAP + "ti,j721e-navss-mcu-udmap" for j721e mcu NAVSS UDMAP +- #dma-cells: Should be set to <3>. + - The first parameter is a phandle to the remote PSI-L + endpoint + - The second parameter is the thread offset within the + remote thread ID range + - The third parameter is the channel direction. +- reg: Memory map of UDMAP +- reg-names: "gcfg", "rchanrt", "tchanrt" +- msi-parent: phandle for "ti,sci-inta" interrupt controller +- ti,ringacc: phandle for the ring accelerator node +- ti,psil-base: PSI-L thread ID base of the UDMAP channels +- ti,sci: phandle on TI-SCI compatible System controller node +- ti,sci-dev-id: TI-SCI device id +- ti,sci-rm-range-tchan: UDMA tchan resource list in pairs of type and subtype +- ti,sci-rm-range-rchan: UDMA rchan resource list in pairs of type and subtype +- ti,sci-rm-range-rflow: UDMA rflow resource list in pairs of type and subtype + +For PSI-L thread management the parent NAVSS node must have: +- ti,sci: phandle on TI-SCI compatible System controller node +- ti,sci-dev-id: TI-SCI device id of the NAVSS instance + +Remote PSI-L endpoint + +Required properties: +-------------------- +- ti,psil-base: PSI-L thread ID base of the endpoint + +Within the PSI-L endpoint node thread configuration subnodes must present with: +psil-configX naming convention, where X is the thread ID offset. + +Configuration node Optional properties: +-------------------- +- pdma,statictr-type: In case the remote endpoint (PDMAs) requires StaticTR + configuration: + - PSIL_STATIC_TR_XY (1): XY type of StaticTR + For endpoints without StaticTR the property is not + needed or to be set PSIL_STATIC_TR_NONE (0). +- pdma,enable-acc32: Force 32 bit access on peripheral port. Only valid for + XY type StaticTR, not supported on am654. + Must be enabled for threads servicing McASP with AFIFO + bypass mode. +- pdma,enable-burst: Enable burst access on peripheral port. Only valid for + XY type StaticTR, not supported on am654. +- ti,channel-tpl: Channel Throughput level: + 0 / or not present - normal channel + 1 - High Throughput channel + 2 - Ultra High Throughput channel (j721e only) +- ti,needs-epib: If the endpoint require EPIB to be present in the + descriptor. +- ti,psd-size: Size of the Protocol Specific Data section of the + descriptor. + +Example: + +main_navss: main_navss { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + dma-coherent; + dma-ranges; + ranges; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <118>; + + main_udmap: dma-controller@31150000 { + compatible = "ti,am654-navss-main-udmap"; + reg = <0x0 0x31150000 0x0 0x100>, + <0x0 0x34000000 0x0 0x100000>, + <0x0 0x35000000 0x0 0x100000>; + reg-names = "gcfg", "rchanrt", "tchanrt"; + #dma-cells = <3>; + + ti,ringacc = <&ringacc>; + ti,psil-base = <0x1000>; + + interrupt-parent = <&main_udmass_inta>; + + ti,sci = <&dmsc>; + ti,sci-dev-id = <188>; + + ti,sci-rm-range-tchan = <0x6 0x1>, /* TX_HCHAN */ + <0x6 0x2>; /* TX_CHAN */ + ti,sci-rm-range-rchan = <0x6 0x4>, /* RX_HCHAN */ + <0x6 0x5>; /* RX_CHAN */ + ti,sci-rm-range-rflow = <0x6 0x6>; /* GP RFLOW */ + }; +}; + +psilss@340c000 { + /* PSILSS1 AASRC */ + compatible = "ti,j721e-psilss"; + reg = <0x0 0x0340c000 0x0 0x1000>; + reg-names = "config"; + + pdma_main_mcasp_g0: pdma_main_mcasp_g0 { + /* PDMA6 (PDMA_MCASP_G0) */ + ti,psil-base = <0x4400>; + + /* psil-config0 */ + psil-config0 { + pdma,statictr-type = ; + pdma,enable-acc32; + pdma,enable-burst; + }; + }; +}; + +mcasp0: mcasp@02B00000 { +... + /* tx: PDMA_MAIN_MCASP_G0-0, rx: PDMA_MAIN_MCASP_G0-0 */ + dmas = <&main_udmap &pdma_main_mcasp_g0 0 UDMA_DIR_TX>, + <&main_udmap &pdma_main_mcasp_g0 0 UDMA_DIR_RX>; + dma-names = "tx", "rx"; +... +}; + +crypto: crypto@4E00000 { + compatible = "ti,sa2ul-crypto"; +... + + /* tx: crypto_pnp-1, rx: crypto_pnp-1 */ + dmas = <&main_udmap &crypto 0 UDMA_DIR_TX>, + <&main_udmap &crypto 0 UDMA_DIR_RX>, + <&main_udmap &crypto 1 UDMA_DIR_RX>; + dma-names = "tx", "rx1", "rx2"; +... + psil-config0 { + ti,needs-epib; + ti,psd-size = <64>; + }; + + psil-config1 { + ti,needs-epib; + ti,psd-size = <64>; + }; + + psil-config2 { + ti,needs-epib; + ti,psd-size = <64>; + }; +}; diff --git a/include/dt-bindings/dma/k3-udma.h b/include/dt-bindings/dma/k3-udma.h new file mode 100644 index 000000000000..f5c8f5d50491 --- /dev/null +++ b/include/dt-bindings/dma/k3-udma.h @@ -0,0 +1,10 @@ +#ifndef __DT_TI_UDMA_H +#define __DT_TI_UDMA_H + +#define UDMA_DIR_TX 0 +#define UDMA_DIR_RX 1 + +#define PSIL_STATIC_TR_NONE 0 +#define PSIL_STATIC_TR_XY 1 + +#endif /* __DT_TI_UDMA_H */