@@ -30,10 +30,6 @@
#include <linux/omap-dma.h>
#include "soc.h"
-#include "omap_hwmod.h"
-#include "omap_device.h"
-
-static enum omap_reg_offsets dma_common_ch_end;
static const struct omap_dma_reg reg_map[] = {
[REVISION] = { 0x0000, 0x00, OMAP_DMA_REG_32BIT },
@@ -81,42 +77,6 @@ static const struct omap_dma_reg reg_map[] = {
[CCDN] = { 0x00d8, 0x60, OMAP_DMA_REG_32BIT },
};
-static void __iomem *dma_base;
-static inline void dma_write(u32 val, int reg, int lch)
-{
- void __iomem *addr = dma_base;
-
- addr += reg_map[reg].offset;
- addr += reg_map[reg].stride * lch;
-
- writel_relaxed(val, addr);
-}
-
-static inline u32 dma_read(int reg, int lch)
-{
- void __iomem *addr = dma_base;
-
- addr += reg_map[reg].offset;
- addr += reg_map[reg].stride * lch;
-
- return readl_relaxed(addr);
-}
-
-static void omap2_clear_dma(int lch)
-{
- int i;
-
- for (i = CSDP; i <= dma_common_ch_end; i += 1)
- dma_write(0, i, lch);
-}
-
-static void omap2_show_dma_caps(void)
-{
- u8 revision = dma_read(REVISION, 0) & 0xff;
- printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
- revision >> 4, revision & 0xf);
-}
-
static unsigned configure_dma_errata(void)
{
unsigned errata = 0;
@@ -221,25 +181,11 @@ struct omap_system_dma_plat_info dma_plat_info = {
.reg_map = reg_map,
.channel_stride = 0x60,
.dma_attr = &dma_attr,
- .show_dma_caps = omap2_show_dma_caps,
- .clear_dma = omap2_clear_dma,
- .dma_write = dma_write,
- .dma_read = dma_read,
-};
-
-static struct platform_device_info omap_dma_dev_info __initdata = {
- .name = "omap-dma-engine",
- .id = -1,
- .dma_mask = DMA_BIT_MASK(32),
};
/* One time initializations */
-static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
+static int __init omap2_system_dma_init(void)
{
- struct platform_device *pdev;
- struct resource *mem;
- char *name = "omap_dma_system";
-
dma_plat_info.errata = configure_dma_errata();
if (soc_is_omap24xx()) {
@@ -254,41 +200,6 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
if (soc_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
dma_attr.dev_caps |= HS_CHANNELS_RESERVED;
- pdev = omap_device_build(name, 0, oh, &dma_plat_info,
- sizeof(dma_plat_info));
- if (IS_ERR(pdev)) {
- pr_err("%s: Can't build omap_device for %s:%s.\n",
- __func__, name, oh->name);
- return PTR_ERR(pdev);
- }
-
- omap_dma_dev_info.res = pdev->resource;
- omap_dma_dev_info.num_res = pdev->num_resources;
-
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!mem) {
- dev_err(&pdev->dev, "%s: no mem resource\n", __func__);
- return -EINVAL;
- }
-
- dma_base = ioremap(mem->start, resource_size(mem));
- if (!dma_base) {
- dev_err(&pdev->dev, "%s: ioremap fail\n", __func__);
- return -ENOMEM;
- }
-
- /* Check the capabilities register for descriptor loading feature */
- if (soc_is_omap24xx() || soc_is_omap34xx() || soc_is_am35xx())
- dma_common_ch_end = CCFN;
- else
- dma_common_ch_end = CCDN;
-
return 0;
}
-
-static int __init omap2_system_dma_init(void)
-{
- return omap_hwmod_for_each_by_class("dma",
- omap2_system_dma_init_dev, NULL);
-}
omap_arch_initcall(omap2_system_dma_init);
@@ -373,176 +373,6 @@ void omap_device_delete(struct omap_device *od)
kfree(od);
}
-/**
- * omap_device_copy_resources - Add legacy IO and IRQ resources
- * @oh: interconnect target module
- * @pdev: platform device to copy resources to
- *
- * We still have legacy DMA and smartreflex needing resources.
- * Let's populate what they need until we can eventually just
- * remove this function. Note that there should be no need to
- * call this from omap_device_build_from_dt(), nor should there
- * be any need to call it for other devices.
- */
-static int
-omap_device_copy_resources(struct omap_hwmod *oh,
- struct platform_device *pdev)
-{
- struct device_node *np, *child;
- struct property *prop;
- struct resource *res;
- const char *name;
- int error, irq = 0;
-
- if (!oh || !oh->od || !oh->od->pdev)
- return -EINVAL;
-
- np = oh->od->pdev->dev.of_node;
- if (!np) {
- error = -ENODEV;
- goto error;
- }
-
- res = kcalloc(2, sizeof(*res), GFP_KERNEL);
- if (!res)
- return -ENOMEM;
-
- /* Do we have a dts range for the interconnect target module? */
- error = omap_hwmod_parse_module_range(oh, np, res);
-
- /* No ranges, rely on device reg entry */
- if (error)
- error = of_address_to_resource(np, 0, res);
- if (error)
- goto free;
-
- /* SmartReflex needs first IO resource name to be "mpu" */
- res[0].name = "mpu";
-
- /*
- * We may have a configured "ti,sysc" interconnect target with a
- * dts child with the interrupt. If so use the first child's
- * first interrupt for "ti-hwmods" legacy support.
- */
- of_property_for_each_string(np, "compatible", prop, name)
- if (!strncmp("ti,sysc-", name, 8))
- break;
-
- child = of_get_next_available_child(np, NULL);
-
- if (name)
- irq = irq_of_parse_and_map(child, 0);
- if (!irq)
- irq = irq_of_parse_and_map(np, 0);
- if (!irq) {
- error = -EINVAL;
- goto free;
- }
-
- /* Legacy DMA code needs interrupt name to be "0" */
- res[1].start = irq;
- res[1].end = irq;
- res[1].flags = IORESOURCE_IRQ;
- res[1].name = "0";
-
- error = platform_device_add_resources(pdev, res, 2);
-
-free:
- kfree(res);
-
-error:
- WARN(error, "%s: %s device %s failed: %i\n",
- __func__, oh->name, dev_name(&pdev->dev),
- error);
-
- return error;
-}
-
-/**
- * omap_device_build - build and register an omap_device with one omap_hwmod
- * @pdev_name: name of the platform_device driver to use
- * @pdev_id: this platform_device's connection ID
- * @oh: ptr to the single omap_hwmod that backs this omap_device
- * @pdata: platform_data ptr to associate with the platform_device
- * @pdata_len: amount of memory pointed to by @pdata
- *
- * Convenience function for building and registering a single
- * omap_device record, which in turn builds and registers a
- * platform_device record. See omap_device_build_ss() for more
- * information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
- * passes along the return value of omap_device_build_ss().
- */
-struct platform_device __init *omap_device_build(const char *pdev_name,
- int pdev_id,
- struct omap_hwmod *oh,
- void *pdata, int pdata_len)
-{
- int ret = -ENOMEM;
- struct platform_device *pdev;
- struct omap_device *od;
-
- if (!oh || !pdev_name)
- return ERR_PTR(-EINVAL);
-
- if (!pdata && pdata_len > 0)
- return ERR_PTR(-EINVAL);
-
- if (strncmp(oh->name, "smartreflex", 11) &&
- strncmp(oh->name, "dma", 3)) {
- pr_warn("%s need to update %s to probe with dt\na",
- __func__, pdev_name);
- ret = -ENODEV;
- goto odbs_exit;
- }
-
- pdev = platform_device_alloc(pdev_name, pdev_id);
- if (!pdev) {
- ret = -ENOMEM;
- goto odbs_exit;
- }
-
- /* Set the dev_name early to allow dev_xxx in omap_device_alloc */
- if (pdev->id != -1)
- dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
- else
- dev_set_name(&pdev->dev, "%s", pdev->name);
-
- /*
- * Must be called before omap_device_alloc() as oh->od
- * only contains the currently registered omap_device
- * and will get overwritten by omap_device_alloc().
- */
- ret = omap_device_copy_resources(oh, pdev);
- if (ret)
- goto odbs_exit1;
-
- od = omap_device_alloc(pdev, &oh, 1);
- if (IS_ERR(od)) {
- ret = PTR_ERR(od);
- goto odbs_exit1;
- }
-
- ret = platform_device_add_data(pdev, pdata, pdata_len);
- if (ret)
- goto odbs_exit2;
-
- ret = omap_device_register(pdev);
- if (ret)
- goto odbs_exit2;
-
- return pdev;
-
-odbs_exit2:
- omap_device_delete(od);
-odbs_exit1:
- platform_device_put(pdev);
-odbs_exit:
-
- pr_err("omap_device: %s: build failed (%d)\n", pdev_name, ret);
-
- return ERR_PTR(ret);
-}
-
#ifdef CONFIG_PM
static int _od_runtime_suspend(struct device *dev)
{
@@ -68,10 +68,6 @@ int omap_device_idle(struct platform_device *pdev);
/* Core code interface */
-struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
- struct omap_hwmod *oh, void *pdata,
- int pdata_len);
-
struct omap_device *omap_device_alloc(struct platform_device *pdev,
struct omap_hwmod **ohs, int oh_cnt);
void omap_device_delete(struct omap_device *od);
We can now drop legacy init for sdma as we pass the quirks in auxdata to the dmaengine driver. Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/dma.c | 91 +--------------- arch/arm/mach-omap2/omap_device.c | 170 ------------------------------ arch/arm/mach-omap2/omap_device.h | 4 - 3 files changed, 1 insertion(+), 264 deletions(-)