| Message ID | 20201005183830.486085-5-robh@kernel.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | dt-bindings: additional/unevaluatedProperties clean-ups | expand |
On Mon, Oct 05, 2020 at 01:38:30PM -0500, Rob Herring wrote: > In order to add meta-schema checks for additional/unevaluatedProperties > being present, all schema need to make this explicit. As common/shared > schema are included by other schemas, they should always allow for > additionalProperties. Acked-by: Mark Brown <broonie@kernel.org>
On Mon, Oct 05, 2020 at 01:38:30PM -0500, Rob Herring wrote: > In order to add meta-schema checks for additional/unevaluatedProperties > being present, all schema need to make this explicit. As common/shared > schema are included by other schemas, they should always allow for > additionalProperties. > > Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Best regards, Krzysztof
Hi, On Mon, Oct 05, 2020 at 01:38:30PM -0500, Rob Herring wrote: > In order to add meta-schema checks for additional/unevaluatedProperties > being present, all schema need to make this explicit. As common/shared > schema are included by other schemas, they should always allow for > additionalProperties. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > [...] > .../devicetree/bindings/power/supply/power-supply.yaml | 2 ++ > [...] Acked-by: Sebastian Reichel <sre@kernel.org> -- Sebastian
On 10/6/20 3:38 AM, Rob Herring wrote: > In order to add meta-schema checks for additional/unevaluatedProperties > being present, all schema need to make this explicit. As common/shared > schema are included by other schemas, they should always allow for > additionalProperties. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- (snip) > Documentation/devicetree/bindings/extcon/wlf,arizona.yaml | 2 ++ (snip) For the extcon part, Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
On 05-10-20, 13:38, Rob Herring wrote: > In order to add meta-schema checks for additional/unevaluatedProperties > being present, all schema need to make this explicit. As common/shared > schema are included by other schemas, they should always allow for > additionalProperties. Acked-By: Vinod Koul <vkoul@kernel.org>
On Mon, 05 Oct 2020, Rob Herring wrote: > In order to add meta-schema checks for additional/unevaluatedProperties > being present, all schema need to make this explicit. As common/shared > schema are included by other schemas, they should always allow for > additionalProperties. Acked-by: Lee Jones <lee.jones@linaro.org>
On Mon, Oct 5, 2020 at 8:39 PM Rob Herring <robh@kernel.org> wrote: > In order to add meta-schema checks for additional/unevaluatedProperties > being present, all schema need to make this explicit. As common/shared > schema are included by other schemas, they should always allow for > additionalProperties. > > Signed-off-by: Rob Herring <robh@kernel.org> > Documentation/devicetree/bindings/bus/simple-pm-bus.yaml | 2 ++ Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Gr{oetje,eeting}s, Geert
On 05/10/2020 19:38, Rob Herring wrote: > In order to add meta-schema checks for additional/unevaluatedProperties > being present, all schema need to make this explicit. As common/shared > schema are included by other schemas, they should always allow for > additionalProperties. > > Signed-off-by: Rob Herring<robh@kernel.org> > > Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml | 2 ++ > Documentation/devicetree/bindings/nvmem/nvmem.yaml | 2 ++ for nvmem parts, Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> thanks, srini
On Mon, 5 Oct 2020 at 20:38, Rob Herring <robh@kernel.org> wrote: > > In order to add meta-schema checks for additional/unevaluatedProperties > being present, all schema need to make this explicit. As common/shared > schema are included by other schemas, they should always allow for > additionalProperties. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- [...] > Documentation/devicetree/bindings/mmc/mmc-controller.yaml | 2 ++ > .../devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml | 2 ++ > Documentation/devicetree/bindings/mtd/nand-controller.yaml | 2 ++ [...] > Documentation/devicetree/bindings/power/power-domain.yaml | 2 ++ For mmc and power-domain: Acked-by: Ulf Hansson <ulf.hansson@linaro.org> [...] Kind regards Uffe
On Mon, 5 Oct 2020 13:38:30 -0500 Rob Herring <robh@kernel.org> wrote: > In order to add meta-schema checks for additional/unevaluatedProperties > being present, all schema need to make this explicit. As common/shared > schema are included by other schemas, they should always allow for > additionalProperties. > > Signed-off-by: Rob Herring <robh@kernel.org> > Documentation/devicetree/bindings/iio/common.yaml | 2 ++ For IIO Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> > ...
On 10/5/20 11:38 AM, Rob Herring wrote: > In order to add meta-schema checks for additional/unevaluatedProperties > being present, all schema need to make this explicit. As common/shared > schema are included by other schemas, they should always allow for > additionalProperties. > > Signed-off-by: Rob Herring <robh@kernel.org> > --- > Documentation/devicetree/bindings/arm/cpus.yaml | 2 ++ > .../devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml | 2 ++ > Documentation/devicetree/bindings/ata/pata-common.yaml | 2 ++ > Documentation/devicetree/bindings/ata/sata-common.yaml | 2 ++ > Documentation/devicetree/bindings/bus/simple-pm-bus.yaml | 2 ++ > .../devicetree/bindings/chrome/google,cros-ec-typec.yaml | 2 ++ > .../devicetree/bindings/connector/usb-connector.yaml | 2 ++ > .../devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml | 2 ++ > .../devicetree/bindings/display/dsi-controller.yaml | 2 ++ > Documentation/devicetree/bindings/display/panel/lvds.yaml | 2 ++ > .../devicetree/bindings/display/panel/panel-common.yaml | 2 ++ > Documentation/devicetree/bindings/dma/dma-common.yaml | 2 ++ > Documentation/devicetree/bindings/dma/dma-controller.yaml | 2 ++ > Documentation/devicetree/bindings/dma/dma-router.yaml | 2 ++ > Documentation/devicetree/bindings/extcon/wlf,arizona.yaml | 2 ++ > .../devicetree/bindings/iio/adc/samsung,exynos-adc.yaml | 5 ++++- > Documentation/devicetree/bindings/iio/common.yaml | 2 ++ > Documentation/devicetree/bindings/input/input.yaml | 2 ++ > Documentation/devicetree/bindings/input/matrix-keymap.yaml | 2 ++ > .../devicetree/bindings/input/touchscreen/touchscreen.yaml | 2 ++ > Documentation/devicetree/bindings/leds/common.yaml | 2 ++ > .../devicetree/bindings/leds/leds-class-multicolor.yaml | 3 +++ > Documentation/devicetree/bindings/leds/trigger-source.yaml | 2 ++ > Documentation/devicetree/bindings/media/rc.yaml | 2 ++ > Documentation/devicetree/bindings/mfd/syscon.yaml | 2 +- > Documentation/devicetree/bindings/mmc/mmc-controller.yaml | 2 ++ > .../devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml | 2 ++ > Documentation/devicetree/bindings/mtd/nand-controller.yaml | 2 ++ > .../devicetree/bindings/net/can/can-transceiver.yaml | 2 ++ > Documentation/devicetree/bindings/net/dsa/dsa.yaml | 2 ++ > .../devicetree/bindings/net/ethernet-controller.yaml | 2 ++ > Documentation/devicetree/bindings/net/ethernet-phy.yaml | 2 ++ > Documentation/devicetree/bindings/net/mdio.yaml | 2 ++ > Documentation/devicetree/bindings/net/snps,dwmac.yaml | 2 ++ > Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml | 2 ++ > Documentation/devicetree/bindings/nvmem/nvmem.yaml | 2 ++ > Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml | 2 ++ > Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml | 2 ++ > Documentation/devicetree/bindings/pci/cdns-pcie.yaml | 2 ++ > Documentation/devicetree/bindings/pci/pci-ep.yaml | 2 ++ > Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml | 2 ++ > Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml | 2 ++ > Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml | 2 ++ > Documentation/devicetree/bindings/power/power-domain.yaml | 2 ++ > .../devicetree/bindings/power/supply/power-supply.yaml | 2 ++ > Documentation/devicetree/bindings/pwm/pwm.yaml | 2 ++ > Documentation/devicetree/bindings/regulator/regulator.yaml | 2 ++ > Documentation/devicetree/bindings/regulator/wlf,arizona.yaml | 2 ++ > Documentation/devicetree/bindings/riscv/cpus.yaml | 2 ++ > Documentation/devicetree/bindings/rtc/rtc.yaml | 2 ++ > Documentation/devicetree/bindings/serial/rs485.yaml | 3 +++ > Documentation/devicetree/bindings/serial/serial.yaml | 2 ++ > Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml | 2 ++ > Documentation/devicetree/bindings/sound/amlogic,aiu.yaml | 2 ++ > Documentation/devicetree/bindings/sound/cirrus,madera.yaml | 2 ++ > .../devicetree/bindings/sound/nvidia,tegra210-ahub.yaml | 3 +++ > Documentation/devicetree/bindings/sound/wlf,arizona.yaml | 2 ++ > .../devicetree/bindings/soundwire/soundwire-controller.yaml | 2 ++ > Documentation/devicetree/bindings/spi/spi-controller.yaml | 2 ++ > Documentation/devicetree/bindings/spmi/spmi.yaml | 2 ++ > .../devicetree/bindings/thermal/thermal-cooling-devices.yaml | 2 ++ > .../devicetree/bindings/thermal/thermal-sensor.yaml | 2 ++ > Documentation/devicetree/bindings/usb/ti,tps6598x.yaml | 2 ++ > Documentation/devicetree/bindings/usb/usb-hcd.yaml | 2 ++ > Documentation/devicetree/bindings/watchdog/watchdog.yaml | 2 ++ For watchdog: Acked-by: Guenter Roeck <linux@roeck-us.net> > 65 files changed, 134 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml > index 1222bf1831fa..14cd727d3c4b 100644 > --- a/Documentation/devicetree/bindings/arm/cpus.yaml > +++ b/Documentation/devicetree/bindings/arm/cpus.yaml > @@ -341,6 +341,8 @@ required: > dependencies: > rockchip,pmu: [enable-method] > > +additionalProperties: true > + > examples: > - | > cpus { > diff --git a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml > index 1043e4be4fca..c9675c4cdc1b 100644 > --- a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml > +++ b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml > @@ -30,6 +30,8 @@ properties: > Specifies the bpmp node that needs to be queried to get > operating point data for all CPUs. > > +additionalProperties: true > + > examples: > - | > cpus { > diff --git a/Documentation/devicetree/bindings/ata/pata-common.yaml b/Documentation/devicetree/bindings/ata/pata-common.yaml > index fc5ebbe7108d..2412894a255d 100644 > --- a/Documentation/devicetree/bindings/ata/pata-common.yaml > +++ b/Documentation/devicetree/bindings/ata/pata-common.yaml > @@ -47,4 +47,6 @@ patternProperties: > The ID number of the drive port, 0 for the master port and 1 for the > slave port. > > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml > index 6783a4dec6b5..7ac77b1c5850 100644 > --- a/Documentation/devicetree/bindings/ata/sata-common.yaml > +++ b/Documentation/devicetree/bindings/ata/sata-common.yaml > @@ -47,4 +47,6 @@ patternProperties: > multiplier making it possible to connect up to 15 disks to a single > SATA port. > > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml > index 33326ffdb266..182134d7a6a3 100644 > --- a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml > +++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml > @@ -61,6 +61,8 @@ anyOf: > - required: > - power-domains > > +additionalProperties: true > + > examples: > - | > #include <dt-bindings/clock/qcom,gcc-msm8996.h> > diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml > index 6d7396ab8bee..2d98f7c4d3bc 100644 > --- a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml > +++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml > @@ -26,6 +26,8 @@ properties: > required: > - compatible > > +additionalProperties: true #fixme > + > examples: > - |+ > spi0 { > diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml > index dc6ff64422d4..f037d65b018e 100644 > --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml > +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml > @@ -172,6 +172,8 @@ allOf: > type: > const: micro > > +additionalProperties: true > + > examples: > # Micro-USB connector with HS lines routed via controller (MUIC). > - | > diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml > index 012aa8e7cb8c..e42cb610f545 100644 > --- a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml > @@ -66,3 +66,5 @@ required: > - clocks > - ports > - reg > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml > index a02039e3aca0..ca21671f6bdd 100644 > --- a/Documentation/devicetree/bindings/display/dsi-controller.yaml > +++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml > @@ -73,6 +73,8 @@ patternProperties: > required: > - reg > > +additionalProperties: true > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml > index 946dd354256c..31164608ba1d 100644 > --- a/Documentation/devicetree/bindings/display/panel/lvds.yaml > +++ b/Documentation/devicetree/bindings/display/panel/lvds.yaml > @@ -112,4 +112,6 @@ oneOf: > - required: > - ports > > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml > index 45fe8fe5faba..cd6dc5461721 100644 > --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml > +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml > @@ -163,4 +163,6 @@ dependencies: > width-mm: [ height-mm ] > height-mm: [ width-mm ] > > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml > index c36592683340..307b499e8968 100644 > --- a/Documentation/devicetree/bindings/dma/dma-common.yaml > +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml > @@ -49,3 +49,5 @@ properties: > > required: > - "#dma-cells" > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/dma/dma-controller.yaml b/Documentation/devicetree/bindings/dma/dma-controller.yaml > index c39f6de76670..0043b91da95e 100644 > --- a/Documentation/devicetree/bindings/dma/dma-controller.yaml > +++ b/Documentation/devicetree/bindings/dma/dma-controller.yaml > @@ -17,6 +17,8 @@ properties: > $nodename: > pattern: "^dma-controller(@.*)?$" > > +additionalProperties: true > + > examples: > - | > dma: dma-controller@48000000 { > diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml > index 5b5f07393135..4cee5667b8a8 100644 > --- a/Documentation/devicetree/bindings/dma/dma-router.yaml > +++ b/Documentation/devicetree/bindings/dma/dma-router.yaml > @@ -36,6 +36,8 @@ required: > - "#dma-cells" > - dma-masters > > +additionalProperties: true > + > examples: > - | > sdma_xbar: dma-router@4a002b78 { > diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml > index f9845dc2f5ae..5fe784f487c5 100644 > --- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml > +++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml > @@ -123,3 +123,5 @@ properties: > $ref: "/schemas/types.yaml#/definitions/uint32" > minimum: 0 > maximum: 3 > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > index 16d76482b4ff..cfb66ba45ee8 100644 > --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > @@ -46,6 +46,8 @@ properties: > "#io-channel-cells": > const: 1 > > + io-channel-ranges: true > + > vdd-supply: true > > samsung,syscon-phandle: > @@ -107,7 +109,8 @@ allOf: > items: > - const: adc > > -additionalProperties: false > +additionalProperties: > + type: object > > examples: > - | > diff --git a/Documentation/devicetree/bindings/iio/common.yaml b/Documentation/devicetree/bindings/iio/common.yaml > index 97ffcb77043d..f845b41d74c4 100644 > --- a/Documentation/devicetree/bindings/iio/common.yaml > +++ b/Documentation/devicetree/bindings/iio/common.yaml > @@ -32,4 +32,6 @@ properties: > considered 'near' to the device (an object is near to the > sensor). > > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml > index 8edcb3c31270..ab407f266bef 100644 > --- a/Documentation/devicetree/bindings/input/input.yaml > +++ b/Documentation/devicetree/bindings/input/input.yaml > @@ -33,3 +33,5 @@ properties: > power off automatically. Device with key pressed shutdown feature can > specify this property. > $ref: /schemas/types.yaml#/definitions/uint32 > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.yaml b/Documentation/devicetree/bindings/input/matrix-keymap.yaml > index c3bf09156783..6699d5e32dca 100644 > --- a/Documentation/devicetree/bindings/input/matrix-keymap.yaml > +++ b/Documentation/devicetree/bindings/input/matrix-keymap.yaml > @@ -35,6 +35,8 @@ properties: > $ref: /schemas/types.yaml#/definitions/uint32 > description: Number of column lines connected to the keypad controller. > > +additionalProperties: true > + > examples: > - | > keypad { > diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml > index 36dc7b56a453..a771a15f053f 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml > +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml > @@ -81,3 +81,5 @@ dependencies: > touchscreen-size-y: [ touchscreen-size-x ] > touchscreen-x-mm: [ touchscreen-y-mm ] > touchscreen-y-mm: [ touchscreen-x-mm ] > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml > index a2a541bca73c..08b6700ca61e 100644 > --- a/Documentation/devicetree/bindings/leds/common.yaml > +++ b/Documentation/devicetree/bindings/leds/common.yaml > @@ -156,6 +156,8 @@ properties: > Maximum timeout in microseconds after which the flash LED is turned off. > Required for flash LED nodes with configurable timeout. > > +additionalProperties: true > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml > index b55e1f1308a4..b1a53f054b89 100644 > --- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml > +++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml > @@ -34,4 +34,7 @@ patternProperties: > > required: > - color > + > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/leds/trigger-source.yaml b/Documentation/devicetree/bindings/leds/trigger-source.yaml > index 0618003e40bd..89a1cde2b8aa 100644 > --- a/Documentation/devicetree/bindings/leds/trigger-source.yaml > +++ b/Documentation/devicetree/bindings/leds/trigger-source.yaml > @@ -21,4 +21,6 @@ properties: > trigger sources (e.g. a specific USB port). > enum: [ 0, 1 ] > > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml > index ded2ac43237d..8ad2cba5f61f 100644 > --- a/Documentation/devicetree/bindings/media/rc.yaml > +++ b/Documentation/devicetree/bindings/media/rc.yaml > @@ -150,3 +150,5 @@ properties: > - rc-x96max > - rc-xbox-dvd > - rc-zx-irdec > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml > index 844ee2a6ce05..5317a7d69aa5 100644 > --- a/Documentation/devicetree/bindings/mfd/syscon.yaml > +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml > @@ -71,7 +71,7 @@ required: > - compatible > - reg > > -unevaluatedProperties: false > +additionalProperties: true > > examples: > - | > diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml > index b96da0c7f819..57319b425eaa 100644 > --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml > +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml > @@ -349,6 +349,8 @@ dependencies: > cd-debounce-delay-ms: [ cd-gpios ] > fixed-emmc-driver-type: [ non-removable ] > > +additionalProperties: true > + > examples: > - | > mmc@ab000000 { > diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml > index 85bd528e9a14..8dfad89c78a7 100644 > --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml > +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml > @@ -62,3 +62,5 @@ properties: > > dma-names: > const: rx-tx > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml > index 40fc5b0b2b8c..274bbe6a365e 100644 > --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml > +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml > @@ -128,6 +128,8 @@ required: > - "#address-cells" > - "#size-cells" > > +additionalProperties: true > + > examples: > - | > nand-controller { > diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml > index 6396977d29e5..d1ef1fe6ab29 100644 > --- a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml > +++ b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml > @@ -16,3 +16,5 @@ properties: > $ref: /schemas/types.yaml#/definitions/uint32 > description: a positive non 0 value that determines the max speed that CAN/CAN-FD can run. > minimum: 1 > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml > index 6a1ec50ad4fd..a765ceba28c6 100644 > --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml > +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml > @@ -89,4 +89,6 @@ oneOf: > - required: > - ethernet-ports > > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml > index fa2baca8c726..3fd85ce37e9c 100644 > --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml > +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml > @@ -205,4 +205,6 @@ properties: > required: > - speed > > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml > index a9e547ac7905..6dd72faebd89 100644 > --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml > +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml > @@ -177,6 +177,8 @@ properties: > required: > - reg > > +additionalProperties: true > + > examples: > - | > ethernet { > diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml > index 26afb556dfae..e811e0fd851c 100644 > --- a/Documentation/devicetree/bindings/net/mdio.yaml > +++ b/Documentation/devicetree/bindings/net/mdio.yaml > @@ -100,6 +100,8 @@ patternProperties: > required: > - reg > > +additionalProperties: true > + > examples: > - | > davinci_mdio: mdio@5c030000 { > diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml > index 30a1efd26626..11a6fdb657c9 100644 > --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml > +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml > @@ -356,6 +356,8 @@ allOf: > Enables the TSO feature otherwise it will be managed by > MAC HW capability register. > > +additionalProperties: true > + > examples: > - | > stmmac_axi_setup: stmmac-axi-config { > diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml > index b7c00ed31085..d5d7f113bade 100644 > --- a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml > +++ b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml > @@ -36,6 +36,8 @@ dependencies: > nvmem-names: [ nvmem ] > nvmem-cell-names: [ nvmem-cells ] > > +additionalProperties: true > + > examples: > - | > tsens { > diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml > index b459f9dba6c9..7481a9e48f19 100644 > --- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml > +++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml > @@ -67,6 +67,8 @@ patternProperties: > required: > - reg > > +additionalProperties: true > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml > index 016a5f61592d..60b8baf299bb 100644 > --- a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml > +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml > @@ -22,3 +22,5 @@ properties: > > required: > - cdns,max-outbound-regions > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml > index 303078a7b7a8..a944f9bfffff 100644 > --- a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml > +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml > @@ -33,3 +33,5 @@ properties: > deprecated: true > > msi-parent: true > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml > index 02553d5e6c51..df4fe28222b0 100644 > --- a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml > +++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml > @@ -21,3 +21,5 @@ properties: > items: > - const: pcie-phy > # FIXME: names when more than 1 > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml > index 0f8e575ac01a..7847bbcd4a03 100644 > --- a/Documentation/devicetree/bindings/pci/pci-ep.yaml > +++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml > @@ -36,3 +36,5 @@ properties: > > required: > - compatible > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml > index 6bfc25d0e1b3..4cb174bf31ff 100644 > --- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml > @@ -120,3 +120,5 @@ properties: > required: > - pinctrl-0 > - pinctrl-names > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml > index 13b7ab9dd6d5..71ed0a9def84 100644 > --- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml > @@ -138,3 +138,5 @@ properties: > and the delay before latching a value to an output > pin. Typically indicates how many double-inverters are > used to delay the signal. > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml > index ef8877ddb1eb..551df3d9b809 100644 > --- a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml > @@ -129,3 +129,5 @@ properties: > > pinctrl-pin-array: > $ref: /schemas/types.yaml#/definitions/uint32-array > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml > index dd564349aa53..aed51e9dcb11 100644 > --- a/Documentation/devicetree/bindings/power/power-domain.yaml > +++ b/Documentation/devicetree/bindings/power/power-domain.yaml > @@ -69,6 +69,8 @@ properties: > required: > - "#power-domain-cells" > > +additionalProperties: true > + > examples: > - | > power: power-controller@12340000 { > diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml > index 3bb02bb3a2d8..c5c55f627251 100644 > --- a/Documentation/devicetree/bindings/power/supply/power-supply.yaml > +++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml > @@ -16,6 +16,8 @@ properties: > This property is added to a supply in order to list the devices which > supply it power, referenced by their phandles. > > +additionalProperties: true > + > examples: > - | > power { > diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml > index fa4f9de92090..7d1f687cee9c 100644 > --- a/Documentation/devicetree/bindings/pwm/pwm.yaml > +++ b/Documentation/devicetree/bindings/pwm/pwm.yaml > @@ -20,6 +20,8 @@ properties: > required: > - "#pwm-cells" > > +additionalProperties: true > + > examples: > - | > pwm: pwm@7000a000 { > diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml > index ec505dbbf87c..6d0bc9cd4040 100644 > --- a/Documentation/devicetree/bindings/regulator/regulator.yaml > +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml > @@ -188,6 +188,8 @@ patternProperties: > > additionalProperties: false > > +additionalProperties: true > + > examples: > - | > xyzreg: regulator { > diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml > index a0aea73bf412..7b4ae5d23351 100644 > --- a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml > +++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml > @@ -35,3 +35,5 @@ properties: > Initial data for the MICVDD regulator. > $ref: "regulator.yaml#" > type: object > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml > index f80ba2c66f71..c6925e0b16e4 100644 > --- a/Documentation/devicetree/bindings/riscv/cpus.yaml > +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml > @@ -91,6 +91,8 @@ required: > - riscv,isa > - interrupt-controller > > +additionalProperties: true > + > examples: > - | > // Example 1: SiFive Freedom U540G Development Kit > diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml > index ee237b2ed66a..2d055e37e6f7 100644 > --- a/Documentation/devicetree/bindings/rtc/rtc.yaml > +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml > @@ -47,4 +47,6 @@ properties: > description: > Enables wake up of host system on alarm. > > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml > index fe90569475e1..0c9fa694f85c 100644 > --- a/Documentation/devicetree/bindings/serial/rs485.yaml > +++ b/Documentation/devicetree/bindings/serial/rs485.yaml > @@ -45,4 +45,7 @@ properties: > rs485-term-gpios: > description: GPIO pin to enable RS485 bus termination. > maxItems: 1 > + > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml > index 8645d0e526b4..65e75d040521 100644 > --- a/Documentation/devicetree/bindings/serial/serial.yaml > +++ b/Documentation/devicetree/bindings/serial/serial.yaml > @@ -124,6 +124,8 @@ patternProperties: > required: > - compatible > > +additionalProperties: true > + > examples: > - | > serial@1234 { > diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml > index 3cbf2d28a188..80d99861fec5 100644 > --- a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml > +++ b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml > @@ -35,6 +35,8 @@ required: > - compatible > - reg > > +additionalProperties: true > + > examples: > - | > bus@30000000 { > diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml > index 7a7f28469624..f50558ed914f 100644 > --- a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml > +++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml > @@ -75,6 +75,8 @@ required: > - reg > - resets > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/gxbb-clkc.h> > diff --git a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml > index c4cd58b5acd4..23138ddcb62d 100644 > --- a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml > +++ b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml > @@ -111,3 +111,5 @@ properties: > $ref: /schemas/types.yaml#/definitions/uint32-array > minItems: 2 > maxItems: 2 > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml > index 44ee9d844ae0..d77219727768 100644 > --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml > +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml > @@ -67,6 +67,9 @@ required: > - "#size-cells" > - ranges > > +additionalProperties: > + type: object > + > examples: > - | > #include<dt-bindings/clock/tegra210-car.h> > diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.yaml b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml > index 22d54be7900a..1627c0bb69be 100644 > --- a/Documentation/devicetree/bindings/sound/wlf,arizona.yaml > +++ b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml > @@ -112,3 +112,5 @@ properties: > $ref: /schemas/types.yaml#/definitions/uint32-array > minItems: 1 > maxItems: 12 > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml > index 330924b8618e..4aad121eff3f 100644 > --- a/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml > +++ b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml > @@ -57,6 +57,8 @@ required: > - "#address-cells" > - "#size-cells" > > +additionalProperties: true > + > examples: > - | > soundwire@c2d0000 { > diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml > index c6a2f543648b..2b154803b181 100644 > --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml > +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml > @@ -140,6 +140,8 @@ patternProperties: > - compatible > - reg > > +additionalProperties: true > + > examples: > - | > spi@f00 { > diff --git a/Documentation/devicetree/bindings/spmi/spmi.yaml b/Documentation/devicetree/bindings/spmi/spmi.yaml > index 0cfbf56ba825..173940930719 100644 > --- a/Documentation/devicetree/bindings/spmi/spmi.yaml > +++ b/Documentation/devicetree/bindings/spmi/spmi.yaml > @@ -55,6 +55,8 @@ patternProperties: > required: > - reg > > +additionalProperties: true > + > examples: > - | > #include <dt-bindings/spmi/spmi.h> > diff --git a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml > index ad4beaf02842..f004779ba9b3 100644 > --- a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml > +++ b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml > @@ -49,6 +49,8 @@ properties: > and the second cell is the maximum cooling state requested. > const: 2 > > +additionalProperties: true > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml > index 727d04550324..9f747921e851 100644 > --- a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml > +++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml > @@ -36,6 +36,8 @@ properties: > containing several internal sensors. > enum: [0, 1] > > +additionalProperties: true > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml > index 8eaf4b6c4735..f6819bf2a3b5 100644 > --- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml > +++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml > @@ -32,6 +32,8 @@ required: > - interrupts > - interrupt-names > > +additionalProperties: true > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml > index 7263b7f2b510..b545b087b342 100644 > --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml > +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml > @@ -22,6 +22,8 @@ properties: > description: > Name specifier for the USB PHY > > +additionalProperties: true > + > examples: > - | > usb { > diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml > index 187bf6cb62bf..4e2c26cd981d 100644 > --- a/Documentation/devicetree/bindings/watchdog/watchdog.yaml > +++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml > @@ -23,4 +23,6 @@ properties: > description: > Contains the watchdog timeout in seconds. > > +additionalProperties: true > + > ... >
On Mon, Oct 05, 2020 at 01:38:30PM -0500, Rob Herring wrote: > In order to add meta-schema checks for additional/unevaluatedProperties > being present, all schema need to make this explicit. As common/shared > schema are included by other schemas, they should always allow for > additionalProperties. > > Signed-off-by: Rob Herring <robh@kernel.org> For input: Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On 05/10/2020 13:38:30-0500, Rob Herring wrote: > In order to add meta-schema checks for additional/unevaluatedProperties > being present, all schema need to make this explicit. As common/shared > schema are included by other schemas, they should always allow for > additionalProperties. > > Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> > --- > Documentation/devicetree/bindings/arm/cpus.yaml | 2 ++ > .../devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml | 2 ++ > Documentation/devicetree/bindings/ata/pata-common.yaml | 2 ++ > Documentation/devicetree/bindings/ata/sata-common.yaml | 2 ++ > Documentation/devicetree/bindings/bus/simple-pm-bus.yaml | 2 ++ > .../devicetree/bindings/chrome/google,cros-ec-typec.yaml | 2 ++ > .../devicetree/bindings/connector/usb-connector.yaml | 2 ++ > .../devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml | 2 ++ > .../devicetree/bindings/display/dsi-controller.yaml | 2 ++ > Documentation/devicetree/bindings/display/panel/lvds.yaml | 2 ++ > .../devicetree/bindings/display/panel/panel-common.yaml | 2 ++ > Documentation/devicetree/bindings/dma/dma-common.yaml | 2 ++ > Documentation/devicetree/bindings/dma/dma-controller.yaml | 2 ++ > Documentation/devicetree/bindings/dma/dma-router.yaml | 2 ++ > Documentation/devicetree/bindings/extcon/wlf,arizona.yaml | 2 ++ > .../devicetree/bindings/iio/adc/samsung,exynos-adc.yaml | 5 ++++- > Documentation/devicetree/bindings/iio/common.yaml | 2 ++ > Documentation/devicetree/bindings/input/input.yaml | 2 ++ > Documentation/devicetree/bindings/input/matrix-keymap.yaml | 2 ++ > .../devicetree/bindings/input/touchscreen/touchscreen.yaml | 2 ++ > Documentation/devicetree/bindings/leds/common.yaml | 2 ++ > .../devicetree/bindings/leds/leds-class-multicolor.yaml | 3 +++ > Documentation/devicetree/bindings/leds/trigger-source.yaml | 2 ++ > Documentation/devicetree/bindings/media/rc.yaml | 2 ++ > Documentation/devicetree/bindings/mfd/syscon.yaml | 2 +- > Documentation/devicetree/bindings/mmc/mmc-controller.yaml | 2 ++ > .../devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml | 2 ++ > Documentation/devicetree/bindings/mtd/nand-controller.yaml | 2 ++ > .../devicetree/bindings/net/can/can-transceiver.yaml | 2 ++ > Documentation/devicetree/bindings/net/dsa/dsa.yaml | 2 ++ > .../devicetree/bindings/net/ethernet-controller.yaml | 2 ++ > Documentation/devicetree/bindings/net/ethernet-phy.yaml | 2 ++ > Documentation/devicetree/bindings/net/mdio.yaml | 2 ++ > Documentation/devicetree/bindings/net/snps,dwmac.yaml | 2 ++ > Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml | 2 ++ > Documentation/devicetree/bindings/nvmem/nvmem.yaml | 2 ++ > Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml | 2 ++ > Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml | 2 ++ > Documentation/devicetree/bindings/pci/cdns-pcie.yaml | 2 ++ > Documentation/devicetree/bindings/pci/pci-ep.yaml | 2 ++ > Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml | 2 ++ > Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml | 2 ++ > Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml | 2 ++ > Documentation/devicetree/bindings/power/power-domain.yaml | 2 ++ > .../devicetree/bindings/power/supply/power-supply.yaml | 2 ++ > Documentation/devicetree/bindings/pwm/pwm.yaml | 2 ++ > Documentation/devicetree/bindings/regulator/regulator.yaml | 2 ++ > Documentation/devicetree/bindings/regulator/wlf,arizona.yaml | 2 ++ > Documentation/devicetree/bindings/riscv/cpus.yaml | 2 ++ > Documentation/devicetree/bindings/rtc/rtc.yaml | 2 ++ > Documentation/devicetree/bindings/serial/rs485.yaml | 3 +++ > Documentation/devicetree/bindings/serial/serial.yaml | 2 ++ > Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml | 2 ++ > Documentation/devicetree/bindings/sound/amlogic,aiu.yaml | 2 ++ > Documentation/devicetree/bindings/sound/cirrus,madera.yaml | 2 ++ > .../devicetree/bindings/sound/nvidia,tegra210-ahub.yaml | 3 +++ > Documentation/devicetree/bindings/sound/wlf,arizona.yaml | 2 ++ > .../devicetree/bindings/soundwire/soundwire-controller.yaml | 2 ++ > Documentation/devicetree/bindings/spi/spi-controller.yaml | 2 ++ > Documentation/devicetree/bindings/spmi/spmi.yaml | 2 ++ > .../devicetree/bindings/thermal/thermal-cooling-devices.yaml | 2 ++ > .../devicetree/bindings/thermal/thermal-sensor.yaml | 2 ++ > Documentation/devicetree/bindings/usb/ti,tps6598x.yaml | 2 ++ > Documentation/devicetree/bindings/usb/usb-hcd.yaml | 2 ++ > Documentation/devicetree/bindings/watchdog/watchdog.yaml | 2 ++ > 65 files changed, 134 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml > index 1222bf1831fa..14cd727d3c4b 100644 > --- a/Documentation/devicetree/bindings/arm/cpus.yaml > +++ b/Documentation/devicetree/bindings/arm/cpus.yaml > @@ -341,6 +341,8 @@ required: > dependencies: > rockchip,pmu: [enable-method] > > +additionalProperties: true > + > examples: > - | > cpus { > diff --git a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml > index 1043e4be4fca..c9675c4cdc1b 100644 > --- a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml > +++ b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml > @@ -30,6 +30,8 @@ properties: > Specifies the bpmp node that needs to be queried to get > operating point data for all CPUs. > > +additionalProperties: true > + > examples: > - | > cpus { > diff --git a/Documentation/devicetree/bindings/ata/pata-common.yaml b/Documentation/devicetree/bindings/ata/pata-common.yaml > index fc5ebbe7108d..2412894a255d 100644 > --- a/Documentation/devicetree/bindings/ata/pata-common.yaml > +++ b/Documentation/devicetree/bindings/ata/pata-common.yaml > @@ -47,4 +47,6 @@ patternProperties: > The ID number of the drive port, 0 for the master port and 1 for the > slave port. > > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml > index 6783a4dec6b5..7ac77b1c5850 100644 > --- a/Documentation/devicetree/bindings/ata/sata-common.yaml > +++ b/Documentation/devicetree/bindings/ata/sata-common.yaml > @@ -47,4 +47,6 @@ patternProperties: > multiplier making it possible to connect up to 15 disks to a single > SATA port. > > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml > index 33326ffdb266..182134d7a6a3 100644 > --- a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml > +++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml > @@ -61,6 +61,8 @@ anyOf: > - required: > - power-domains > > +additionalProperties: true > + > examples: > - | > #include <dt-bindings/clock/qcom,gcc-msm8996.h> > diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml > index 6d7396ab8bee..2d98f7c4d3bc 100644 > --- a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml > +++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml > @@ -26,6 +26,8 @@ properties: > required: > - compatible > > +additionalProperties: true #fixme > + > examples: > - |+ > spi0 { > diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml > index dc6ff64422d4..f037d65b018e 100644 > --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml > +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml > @@ -172,6 +172,8 @@ allOf: > type: > const: micro > > +additionalProperties: true > + > examples: > # Micro-USB connector with HS lines routed via controller (MUIC). > - | > diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml > index 012aa8e7cb8c..e42cb610f545 100644 > --- a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml > +++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml > @@ -66,3 +66,5 @@ required: > - clocks > - ports > - reg > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml > index a02039e3aca0..ca21671f6bdd 100644 > --- a/Documentation/devicetree/bindings/display/dsi-controller.yaml > +++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml > @@ -73,6 +73,8 @@ patternProperties: > required: > - reg > > +additionalProperties: true > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml > index 946dd354256c..31164608ba1d 100644 > --- a/Documentation/devicetree/bindings/display/panel/lvds.yaml > +++ b/Documentation/devicetree/bindings/display/panel/lvds.yaml > @@ -112,4 +112,6 @@ oneOf: > - required: > - ports > > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml > index 45fe8fe5faba..cd6dc5461721 100644 > --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml > +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml > @@ -163,4 +163,6 @@ dependencies: > width-mm: [ height-mm ] > height-mm: [ width-mm ] > > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml > index c36592683340..307b499e8968 100644 > --- a/Documentation/devicetree/bindings/dma/dma-common.yaml > +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml > @@ -49,3 +49,5 @@ properties: > > required: > - "#dma-cells" > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/dma/dma-controller.yaml b/Documentation/devicetree/bindings/dma/dma-controller.yaml > index c39f6de76670..0043b91da95e 100644 > --- a/Documentation/devicetree/bindings/dma/dma-controller.yaml > +++ b/Documentation/devicetree/bindings/dma/dma-controller.yaml > @@ -17,6 +17,8 @@ properties: > $nodename: > pattern: "^dma-controller(@.*)?$" > > +additionalProperties: true > + > examples: > - | > dma: dma-controller@48000000 { > diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml > index 5b5f07393135..4cee5667b8a8 100644 > --- a/Documentation/devicetree/bindings/dma/dma-router.yaml > +++ b/Documentation/devicetree/bindings/dma/dma-router.yaml > @@ -36,6 +36,8 @@ required: > - "#dma-cells" > - dma-masters > > +additionalProperties: true > + > examples: > - | > sdma_xbar: dma-router@4a002b78 { > diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml > index f9845dc2f5ae..5fe784f487c5 100644 > --- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml > +++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml > @@ -123,3 +123,5 @@ properties: > $ref: "/schemas/types.yaml#/definitions/uint32" > minimum: 0 > maximum: 3 > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > index 16d76482b4ff..cfb66ba45ee8 100644 > --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml > @@ -46,6 +46,8 @@ properties: > "#io-channel-cells": > const: 1 > > + io-channel-ranges: true > + > vdd-supply: true > > samsung,syscon-phandle: > @@ -107,7 +109,8 @@ allOf: > items: > - const: adc > > -additionalProperties: false > +additionalProperties: > + type: object > > examples: > - | > diff --git a/Documentation/devicetree/bindings/iio/common.yaml b/Documentation/devicetree/bindings/iio/common.yaml > index 97ffcb77043d..f845b41d74c4 100644 > --- a/Documentation/devicetree/bindings/iio/common.yaml > +++ b/Documentation/devicetree/bindings/iio/common.yaml > @@ -32,4 +32,6 @@ properties: > considered 'near' to the device (an object is near to the > sensor). > > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml > index 8edcb3c31270..ab407f266bef 100644 > --- a/Documentation/devicetree/bindings/input/input.yaml > +++ b/Documentation/devicetree/bindings/input/input.yaml > @@ -33,3 +33,5 @@ properties: > power off automatically. Device with key pressed shutdown feature can > specify this property. > $ref: /schemas/types.yaml#/definitions/uint32 > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.yaml b/Documentation/devicetree/bindings/input/matrix-keymap.yaml > index c3bf09156783..6699d5e32dca 100644 > --- a/Documentation/devicetree/bindings/input/matrix-keymap.yaml > +++ b/Documentation/devicetree/bindings/input/matrix-keymap.yaml > @@ -35,6 +35,8 @@ properties: > $ref: /schemas/types.yaml#/definitions/uint32 > description: Number of column lines connected to the keypad controller. > > +additionalProperties: true > + > examples: > - | > keypad { > diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml > index 36dc7b56a453..a771a15f053f 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml > +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml > @@ -81,3 +81,5 @@ dependencies: > touchscreen-size-y: [ touchscreen-size-x ] > touchscreen-x-mm: [ touchscreen-y-mm ] > touchscreen-y-mm: [ touchscreen-x-mm ] > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml > index a2a541bca73c..08b6700ca61e 100644 > --- a/Documentation/devicetree/bindings/leds/common.yaml > +++ b/Documentation/devicetree/bindings/leds/common.yaml > @@ -156,6 +156,8 @@ properties: > Maximum timeout in microseconds after which the flash LED is turned off. > Required for flash LED nodes with configurable timeout. > > +additionalProperties: true > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml > index b55e1f1308a4..b1a53f054b89 100644 > --- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml > +++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml > @@ -34,4 +34,7 @@ patternProperties: > > required: > - color > + > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/leds/trigger-source.yaml b/Documentation/devicetree/bindings/leds/trigger-source.yaml > index 0618003e40bd..89a1cde2b8aa 100644 > --- a/Documentation/devicetree/bindings/leds/trigger-source.yaml > +++ b/Documentation/devicetree/bindings/leds/trigger-source.yaml > @@ -21,4 +21,6 @@ properties: > trigger sources (e.g. a specific USB port). > enum: [ 0, 1 ] > > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml > index ded2ac43237d..8ad2cba5f61f 100644 > --- a/Documentation/devicetree/bindings/media/rc.yaml > +++ b/Documentation/devicetree/bindings/media/rc.yaml > @@ -150,3 +150,5 @@ properties: > - rc-x96max > - rc-xbox-dvd > - rc-zx-irdec > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml > index 844ee2a6ce05..5317a7d69aa5 100644 > --- a/Documentation/devicetree/bindings/mfd/syscon.yaml > +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml > @@ -71,7 +71,7 @@ required: > - compatible > - reg > > -unevaluatedProperties: false > +additionalProperties: true > > examples: > - | > diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml > index b96da0c7f819..57319b425eaa 100644 > --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml > +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml > @@ -349,6 +349,8 @@ dependencies: > cd-debounce-delay-ms: [ cd-gpios ] > fixed-emmc-driver-type: [ non-removable ] > > +additionalProperties: true > + > examples: > - | > mmc@ab000000 { > diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml > index 85bd528e9a14..8dfad89c78a7 100644 > --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml > +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml > @@ -62,3 +62,5 @@ properties: > > dma-names: > const: rx-tx > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml > index 40fc5b0b2b8c..274bbe6a365e 100644 > --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml > +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml > @@ -128,6 +128,8 @@ required: > - "#address-cells" > - "#size-cells" > > +additionalProperties: true > + > examples: > - | > nand-controller { > diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml > index 6396977d29e5..d1ef1fe6ab29 100644 > --- a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml > +++ b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml > @@ -16,3 +16,5 @@ properties: > $ref: /schemas/types.yaml#/definitions/uint32 > description: a positive non 0 value that determines the max speed that CAN/CAN-FD can run. > minimum: 1 > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml > index 6a1ec50ad4fd..a765ceba28c6 100644 > --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml > +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml > @@ -89,4 +89,6 @@ oneOf: > - required: > - ethernet-ports > > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml > index fa2baca8c726..3fd85ce37e9c 100644 > --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml > +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml > @@ -205,4 +205,6 @@ properties: > required: > - speed > > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml > index a9e547ac7905..6dd72faebd89 100644 > --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml > +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml > @@ -177,6 +177,8 @@ properties: > required: > - reg > > +additionalProperties: true > + > examples: > - | > ethernet { > diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml > index 26afb556dfae..e811e0fd851c 100644 > --- a/Documentation/devicetree/bindings/net/mdio.yaml > +++ b/Documentation/devicetree/bindings/net/mdio.yaml > @@ -100,6 +100,8 @@ patternProperties: > required: > - reg > > +additionalProperties: true > + > examples: > - | > davinci_mdio: mdio@5c030000 { > diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml > index 30a1efd26626..11a6fdb657c9 100644 > --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml > +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml > @@ -356,6 +356,8 @@ allOf: > Enables the TSO feature otherwise it will be managed by > MAC HW capability register. > > +additionalProperties: true > + > examples: > - | > stmmac_axi_setup: stmmac-axi-config { > diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml > index b7c00ed31085..d5d7f113bade 100644 > --- a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml > +++ b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml > @@ -36,6 +36,8 @@ dependencies: > nvmem-names: [ nvmem ] > nvmem-cell-names: [ nvmem-cells ] > > +additionalProperties: true > + > examples: > - | > tsens { > diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml > index b459f9dba6c9..7481a9e48f19 100644 > --- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml > +++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml > @@ -67,6 +67,8 @@ patternProperties: > required: > - reg > > +additionalProperties: true > + > examples: > - | > #include <dt-bindings/gpio/gpio.h> > diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml > index 016a5f61592d..60b8baf299bb 100644 > --- a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml > +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml > @@ -22,3 +22,5 @@ properties: > > required: > - cdns,max-outbound-regions > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml > index 303078a7b7a8..a944f9bfffff 100644 > --- a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml > +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml > @@ -33,3 +33,5 @@ properties: > deprecated: true > > msi-parent: true > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml > index 02553d5e6c51..df4fe28222b0 100644 > --- a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml > +++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml > @@ -21,3 +21,5 @@ properties: > items: > - const: pcie-phy > # FIXME: names when more than 1 > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml > index 0f8e575ac01a..7847bbcd4a03 100644 > --- a/Documentation/devicetree/bindings/pci/pci-ep.yaml > +++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml > @@ -36,3 +36,5 @@ properties: > > required: > - compatible > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml > index 6bfc25d0e1b3..4cb174bf31ff 100644 > --- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml > @@ -120,3 +120,5 @@ properties: > required: > - pinctrl-0 > - pinctrl-names > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml > index 13b7ab9dd6d5..71ed0a9def84 100644 > --- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml > @@ -138,3 +138,5 @@ properties: > and the delay before latching a value to an output > pin. Typically indicates how many double-inverters are > used to delay the signal. > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml > index ef8877ddb1eb..551df3d9b809 100644 > --- a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml > +++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml > @@ -129,3 +129,5 @@ properties: > > pinctrl-pin-array: > $ref: /schemas/types.yaml#/definitions/uint32-array > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml > index dd564349aa53..aed51e9dcb11 100644 > --- a/Documentation/devicetree/bindings/power/power-domain.yaml > +++ b/Documentation/devicetree/bindings/power/power-domain.yaml > @@ -69,6 +69,8 @@ properties: > required: > - "#power-domain-cells" > > +additionalProperties: true > + > examples: > - | > power: power-controller@12340000 { > diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml > index 3bb02bb3a2d8..c5c55f627251 100644 > --- a/Documentation/devicetree/bindings/power/supply/power-supply.yaml > +++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml > @@ -16,6 +16,8 @@ properties: > This property is added to a supply in order to list the devices which > supply it power, referenced by their phandles. > > +additionalProperties: true > + > examples: > - | > power { > diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml > index fa4f9de92090..7d1f687cee9c 100644 > --- a/Documentation/devicetree/bindings/pwm/pwm.yaml > +++ b/Documentation/devicetree/bindings/pwm/pwm.yaml > @@ -20,6 +20,8 @@ properties: > required: > - "#pwm-cells" > > +additionalProperties: true > + > examples: > - | > pwm: pwm@7000a000 { > diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml > index ec505dbbf87c..6d0bc9cd4040 100644 > --- a/Documentation/devicetree/bindings/regulator/regulator.yaml > +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml > @@ -188,6 +188,8 @@ patternProperties: > > additionalProperties: false > > +additionalProperties: true > + > examples: > - | > xyzreg: regulator { > diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml > index a0aea73bf412..7b4ae5d23351 100644 > --- a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml > +++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml > @@ -35,3 +35,5 @@ properties: > Initial data for the MICVDD regulator. > $ref: "regulator.yaml#" > type: object > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml > index f80ba2c66f71..c6925e0b16e4 100644 > --- a/Documentation/devicetree/bindings/riscv/cpus.yaml > +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml > @@ -91,6 +91,8 @@ required: > - riscv,isa > - interrupt-controller > > +additionalProperties: true > + > examples: > - | > // Example 1: SiFive Freedom U540G Development Kit > diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml > index ee237b2ed66a..2d055e37e6f7 100644 > --- a/Documentation/devicetree/bindings/rtc/rtc.yaml > +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml > @@ -47,4 +47,6 @@ properties: > description: > Enables wake up of host system on alarm. > > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml > index fe90569475e1..0c9fa694f85c 100644 > --- a/Documentation/devicetree/bindings/serial/rs485.yaml > +++ b/Documentation/devicetree/bindings/serial/rs485.yaml > @@ -45,4 +45,7 @@ properties: > rs485-term-gpios: > description: GPIO pin to enable RS485 bus termination. > maxItems: 1 > + > +additionalProperties: true > + > ... > diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml > index 8645d0e526b4..65e75d040521 100644 > --- a/Documentation/devicetree/bindings/serial/serial.yaml > +++ b/Documentation/devicetree/bindings/serial/serial.yaml > @@ -124,6 +124,8 @@ patternProperties: > required: > - compatible > > +additionalProperties: true > + > examples: > - | > serial@1234 { > diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml > index 3cbf2d28a188..80d99861fec5 100644 > --- a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml > +++ b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml > @@ -35,6 +35,8 @@ required: > - compatible > - reg > > +additionalProperties: true > + > examples: > - | > bus@30000000 { > diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml > index 7a7f28469624..f50558ed914f 100644 > --- a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml > +++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml > @@ -75,6 +75,8 @@ required: > - reg > - resets > > +additionalProperties: false > + > examples: > - | > #include <dt-bindings/clock/gxbb-clkc.h> > diff --git a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml > index c4cd58b5acd4..23138ddcb62d 100644 > --- a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml > +++ b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml > @@ -111,3 +111,5 @@ properties: > $ref: /schemas/types.yaml#/definitions/uint32-array > minItems: 2 > maxItems: 2 > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml > index 44ee9d844ae0..d77219727768 100644 > --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml > +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml > @@ -67,6 +67,9 @@ required: > - "#size-cells" > - ranges > > +additionalProperties: > + type: object > + > examples: > - | > #include<dt-bindings/clock/tegra210-car.h> > diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.yaml b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml > index 22d54be7900a..1627c0bb69be 100644 > --- a/Documentation/devicetree/bindings/sound/wlf,arizona.yaml > +++ b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml > @@ -112,3 +112,5 @@ properties: > $ref: /schemas/types.yaml#/definitions/uint32-array > minItems: 1 > maxItems: 12 > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml > index 330924b8618e..4aad121eff3f 100644 > --- a/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml > +++ b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml > @@ -57,6 +57,8 @@ required: > - "#address-cells" > - "#size-cells" > > +additionalProperties: true > + > examples: > - | > soundwire@c2d0000 { > diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml > index c6a2f543648b..2b154803b181 100644 > --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml > +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml > @@ -140,6 +140,8 @@ patternProperties: > - compatible > - reg > > +additionalProperties: true > + > examples: > - | > spi@f00 { > diff --git a/Documentation/devicetree/bindings/spmi/spmi.yaml b/Documentation/devicetree/bindings/spmi/spmi.yaml > index 0cfbf56ba825..173940930719 100644 > --- a/Documentation/devicetree/bindings/spmi/spmi.yaml > +++ b/Documentation/devicetree/bindings/spmi/spmi.yaml > @@ -55,6 +55,8 @@ patternProperties: > required: > - reg > > +additionalProperties: true > + > examples: > - | > #include <dt-bindings/spmi/spmi.h> > diff --git a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml > index ad4beaf02842..f004779ba9b3 100644 > --- a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml > +++ b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml > @@ -49,6 +49,8 @@ properties: > and the second cell is the maximum cooling state requested. > const: 2 > > +additionalProperties: true > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml > index 727d04550324..9f747921e851 100644 > --- a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml > +++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml > @@ -36,6 +36,8 @@ properties: > containing several internal sensors. > enum: [0, 1] > > +additionalProperties: true > + > examples: > - | > #include <dt-bindings/interrupt-controller/arm-gic.h> > diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml > index 8eaf4b6c4735..f6819bf2a3b5 100644 > --- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml > +++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml > @@ -32,6 +32,8 @@ required: > - interrupts > - interrupt-names > > +additionalProperties: true > + > examples: > - | > #include <dt-bindings/interrupt-controller/irq.h> > diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml > index 7263b7f2b510..b545b087b342 100644 > --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml > +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml > @@ -22,6 +22,8 @@ properties: > description: > Name specifier for the USB PHY > > +additionalProperties: true > + > examples: > - | > usb { > diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml > index 187bf6cb62bf..4e2c26cd981d 100644 > --- a/Documentation/devicetree/bindings/watchdog/watchdog.yaml > +++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml > @@ -23,4 +23,6 @@ properties: > description: > Contains the watchdog timeout in seconds. > > +additionalProperties: true > + > ... > -- > 2.25.1 >
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 1222bf1831fa..14cd727d3c4b 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -341,6 +341,8 @@ required: dependencies: rockchip,pmu: [enable-method] +additionalProperties: true + examples: - | cpus { diff --git a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml index 1043e4be4fca..c9675c4cdc1b 100644 --- a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml +++ b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml @@ -30,6 +30,8 @@ properties: Specifies the bpmp node that needs to be queried to get operating point data for all CPUs. +additionalProperties: true + examples: - | cpus { diff --git a/Documentation/devicetree/bindings/ata/pata-common.yaml b/Documentation/devicetree/bindings/ata/pata-common.yaml index fc5ebbe7108d..2412894a255d 100644 --- a/Documentation/devicetree/bindings/ata/pata-common.yaml +++ b/Documentation/devicetree/bindings/ata/pata-common.yaml @@ -47,4 +47,6 @@ patternProperties: The ID number of the drive port, 0 for the master port and 1 for the slave port. +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml index 6783a4dec6b5..7ac77b1c5850 100644 --- a/Documentation/devicetree/bindings/ata/sata-common.yaml +++ b/Documentation/devicetree/bindings/ata/sata-common.yaml @@ -47,4 +47,6 @@ patternProperties: multiplier making it possible to connect up to 15 disks to a single SATA port. +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml index 33326ffdb266..182134d7a6a3 100644 --- a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml +++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml @@ -61,6 +61,8 @@ anyOf: - required: - power-domains +additionalProperties: true + examples: - | #include <dt-bindings/clock/qcom,gcc-msm8996.h> diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml index 6d7396ab8bee..2d98f7c4d3bc 100644 --- a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml +++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml @@ -26,6 +26,8 @@ properties: required: - compatible +additionalProperties: true #fixme + examples: - |+ spi0 { diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index dc6ff64422d4..f037d65b018e 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -172,6 +172,8 @@ allOf: type: const: micro +additionalProperties: true + examples: # Micro-USB connector with HS lines routed via controller (MUIC). - | diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml index 012aa8e7cb8c..e42cb610f545 100644 --- a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml @@ -66,3 +66,5 @@ required: - clocks - ports - reg + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml index a02039e3aca0..ca21671f6bdd 100644 --- a/Documentation/devicetree/bindings/display/dsi-controller.yaml +++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml @@ -73,6 +73,8 @@ patternProperties: required: - reg +additionalProperties: true + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml index 946dd354256c..31164608ba1d 100644 --- a/Documentation/devicetree/bindings/display/panel/lvds.yaml +++ b/Documentation/devicetree/bindings/display/panel/lvds.yaml @@ -112,4 +112,6 @@ oneOf: - required: - ports +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml index 45fe8fe5faba..cd6dc5461721 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml @@ -163,4 +163,6 @@ dependencies: width-mm: [ height-mm ] height-mm: [ width-mm ] +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml index c36592683340..307b499e8968 100644 --- a/Documentation/devicetree/bindings/dma/dma-common.yaml +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml @@ -49,3 +49,5 @@ properties: required: - "#dma-cells" + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/dma/dma-controller.yaml b/Documentation/devicetree/bindings/dma/dma-controller.yaml index c39f6de76670..0043b91da95e 100644 --- a/Documentation/devicetree/bindings/dma/dma-controller.yaml +++ b/Documentation/devicetree/bindings/dma/dma-controller.yaml @@ -17,6 +17,8 @@ properties: $nodename: pattern: "^dma-controller(@.*)?$" +additionalProperties: true + examples: - | dma: dma-controller@48000000 { diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml index 5b5f07393135..4cee5667b8a8 100644 --- a/Documentation/devicetree/bindings/dma/dma-router.yaml +++ b/Documentation/devicetree/bindings/dma/dma-router.yaml @@ -36,6 +36,8 @@ required: - "#dma-cells" - dma-masters +additionalProperties: true + examples: - | sdma_xbar: dma-router@4a002b78 { diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml index f9845dc2f5ae..5fe784f487c5 100644 --- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml @@ -123,3 +123,5 @@ properties: $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 0 maximum: 3 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml index 16d76482b4ff..cfb66ba45ee8 100644 --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml @@ -46,6 +46,8 @@ properties: "#io-channel-cells": const: 1 + io-channel-ranges: true + vdd-supply: true samsung,syscon-phandle: @@ -107,7 +109,8 @@ allOf: items: - const: adc -additionalProperties: false +additionalProperties: + type: object examples: - | diff --git a/Documentation/devicetree/bindings/iio/common.yaml b/Documentation/devicetree/bindings/iio/common.yaml index 97ffcb77043d..f845b41d74c4 100644 --- a/Documentation/devicetree/bindings/iio/common.yaml +++ b/Documentation/devicetree/bindings/iio/common.yaml @@ -32,4 +32,6 @@ properties: considered 'near' to the device (an object is near to the sensor). +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml index 8edcb3c31270..ab407f266bef 100644 --- a/Documentation/devicetree/bindings/input/input.yaml +++ b/Documentation/devicetree/bindings/input/input.yaml @@ -33,3 +33,5 @@ properties: power off automatically. Device with key pressed shutdown feature can specify this property. $ref: /schemas/types.yaml#/definitions/uint32 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.yaml b/Documentation/devicetree/bindings/input/matrix-keymap.yaml index c3bf09156783..6699d5e32dca 100644 --- a/Documentation/devicetree/bindings/input/matrix-keymap.yaml +++ b/Documentation/devicetree/bindings/input/matrix-keymap.yaml @@ -35,6 +35,8 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: Number of column lines connected to the keypad controller. +additionalProperties: true + examples: - | keypad { diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml index 36dc7b56a453..a771a15f053f 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -81,3 +81,5 @@ dependencies: touchscreen-size-y: [ touchscreen-size-x ] touchscreen-x-mm: [ touchscreen-y-mm ] touchscreen-y-mm: [ touchscreen-x-mm ] + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index a2a541bca73c..08b6700ca61e 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -156,6 +156,8 @@ properties: Maximum timeout in microseconds after which the flash LED is turned off. Required for flash LED nodes with configurable timeout. +additionalProperties: true + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml index b55e1f1308a4..b1a53f054b89 100644 --- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml +++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml @@ -34,4 +34,7 @@ patternProperties: required: - color + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/leds/trigger-source.yaml b/Documentation/devicetree/bindings/leds/trigger-source.yaml index 0618003e40bd..89a1cde2b8aa 100644 --- a/Documentation/devicetree/bindings/leds/trigger-source.yaml +++ b/Documentation/devicetree/bindings/leds/trigger-source.yaml @@ -21,4 +21,6 @@ properties: trigger sources (e.g. a specific USB port). enum: [ 0, 1 ] +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml index ded2ac43237d..8ad2cba5f61f 100644 --- a/Documentation/devicetree/bindings/media/rc.yaml +++ b/Documentation/devicetree/bindings/media/rc.yaml @@ -150,3 +150,5 @@ properties: - rc-x96max - rc-xbox-dvd - rc-zx-irdec + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 844ee2a6ce05..5317a7d69aa5 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -71,7 +71,7 @@ required: - compatible - reg -unevaluatedProperties: false +additionalProperties: true examples: - | diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index b96da0c7f819..57319b425eaa 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -349,6 +349,8 @@ dependencies: cd-debounce-delay-ms: [ cd-gpios ] fixed-emmc-driver-type: [ non-removable ] +additionalProperties: true + examples: - | mmc@ab000000 { diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml index 85bd528e9a14..8dfad89c78a7 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml @@ -62,3 +62,5 @@ properties: dma-names: const: rx-tx + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml index 40fc5b0b2b8c..274bbe6a365e 100644 --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml @@ -128,6 +128,8 @@ required: - "#address-cells" - "#size-cells" +additionalProperties: true + examples: - | nand-controller { diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml index 6396977d29e5..d1ef1fe6ab29 100644 --- a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml +++ b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml @@ -16,3 +16,5 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: a positive non 0 value that determines the max speed that CAN/CAN-FD can run. minimum: 1 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index 6a1ec50ad4fd..a765ceba28c6 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -89,4 +89,6 @@ oneOf: - required: - ethernet-ports +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index fa2baca8c726..3fd85ce37e9c 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -205,4 +205,6 @@ properties: required: - speed +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index a9e547ac7905..6dd72faebd89 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -177,6 +177,8 @@ properties: required: - reg +additionalProperties: true + examples: - | ethernet { diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml index 26afb556dfae..e811e0fd851c 100644 --- a/Documentation/devicetree/bindings/net/mdio.yaml +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -100,6 +100,8 @@ patternProperties: required: - reg +additionalProperties: true + examples: - | davinci_mdio: mdio@5c030000 { diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 30a1efd26626..11a6fdb657c9 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -356,6 +356,8 @@ allOf: Enables the TSO feature otherwise it will be managed by MAC HW capability register. +additionalProperties: true + examples: - | stmmac_axi_setup: stmmac-axi-config { diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml index b7c00ed31085..d5d7f113bade 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml +++ b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml @@ -36,6 +36,8 @@ dependencies: nvmem-names: [ nvmem ] nvmem-cell-names: [ nvmem-cells ] +additionalProperties: true + examples: - | tsens { diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml index b459f9dba6c9..7481a9e48f19 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml +++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml @@ -67,6 +67,8 @@ patternProperties: required: - reg +additionalProperties: true + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml index 016a5f61592d..60b8baf299bb 100644 --- a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml @@ -22,3 +22,5 @@ properties: required: - cdns,max-outbound-regions + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml index 303078a7b7a8..a944f9bfffff 100644 --- a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml @@ -33,3 +33,5 @@ properties: deprecated: true msi-parent: true + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml index 02553d5e6c51..df4fe28222b0 100644 --- a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml @@ -21,3 +21,5 @@ properties: items: - const: pcie-phy # FIXME: names when more than 1 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml index 0f8e575ac01a..7847bbcd4a03 100644 --- a/Documentation/devicetree/bindings/pci/pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml @@ -36,3 +36,5 @@ properties: required: - compatible + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml index 6bfc25d0e1b3..4cb174bf31ff 100644 --- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml @@ -120,3 +120,5 @@ properties: required: - pinctrl-0 - pinctrl-names + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml index 13b7ab9dd6d5..71ed0a9def84 100644 --- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml @@ -138,3 +138,5 @@ properties: and the delay before latching a value to an output pin. Typically indicates how many double-inverters are used to delay the signal. + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml index ef8877ddb1eb..551df3d9b809 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml @@ -129,3 +129,5 @@ properties: pinctrl-pin-array: $ref: /schemas/types.yaml#/definitions/uint32-array + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml index dd564349aa53..aed51e9dcb11 100644 --- a/Documentation/devicetree/bindings/power/power-domain.yaml +++ b/Documentation/devicetree/bindings/power/power-domain.yaml @@ -69,6 +69,8 @@ properties: required: - "#power-domain-cells" +additionalProperties: true + examples: - | power: power-controller@12340000 { diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml index 3bb02bb3a2d8..c5c55f627251 100644 --- a/Documentation/devicetree/bindings/power/supply/power-supply.yaml +++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml @@ -16,6 +16,8 @@ properties: This property is added to a supply in order to list the devices which supply it power, referenced by their phandles. +additionalProperties: true + examples: - | power { diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml index fa4f9de92090..7d1f687cee9c 100644 --- a/Documentation/devicetree/bindings/pwm/pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm.yaml @@ -20,6 +20,8 @@ properties: required: - "#pwm-cells" +additionalProperties: true + examples: - | pwm: pwm@7000a000 { diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index ec505dbbf87c..6d0bc9cd4040 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -188,6 +188,8 @@ patternProperties: additionalProperties: false +additionalProperties: true + examples: - | xyzreg: regulator { diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml index a0aea73bf412..7b4ae5d23351 100644 --- a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml @@ -35,3 +35,5 @@ properties: Initial data for the MICVDD regulator. $ref: "regulator.yaml#" type: object + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index f80ba2c66f71..c6925e0b16e4 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -91,6 +91,8 @@ required: - riscv,isa - interrupt-controller +additionalProperties: true + examples: - | // Example 1: SiFive Freedom U540G Development Kit diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml index ee237b2ed66a..2d055e37e6f7 100644 --- a/Documentation/devicetree/bindings/rtc/rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml @@ -47,4 +47,6 @@ properties: description: Enables wake up of host system on alarm. +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml index fe90569475e1..0c9fa694f85c 100644 --- a/Documentation/devicetree/bindings/serial/rs485.yaml +++ b/Documentation/devicetree/bindings/serial/rs485.yaml @@ -45,4 +45,7 @@ properties: rs485-term-gpios: description: GPIO pin to enable RS485 bus termination. maxItems: 1 + +additionalProperties: true + ... diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index 8645d0e526b4..65e75d040521 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -124,6 +124,8 @@ patternProperties: required: - compatible +additionalProperties: true + examples: - | serial@1234 { diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml index 3cbf2d28a188..80d99861fec5 100644 --- a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml +++ b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml @@ -35,6 +35,8 @@ required: - compatible - reg +additionalProperties: true + examples: - | bus@30000000 { diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml index 7a7f28469624..f50558ed914f 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml @@ -75,6 +75,8 @@ required: - reg - resets +additionalProperties: false + examples: - | #include <dt-bindings/clock/gxbb-clkc.h> diff --git a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml index c4cd58b5acd4..23138ddcb62d 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml @@ -111,3 +111,5 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 maxItems: 2 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml index 44ee9d844ae0..d77219727768 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml @@ -67,6 +67,9 @@ required: - "#size-cells" - ranges +additionalProperties: + type: object + examples: - | #include<dt-bindings/clock/tegra210-car.h> diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.yaml b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml index 22d54be7900a..1627c0bb69be 100644 --- a/Documentation/devicetree/bindings/sound/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml @@ -112,3 +112,5 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 12 + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml index 330924b8618e..4aad121eff3f 100644 --- a/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml +++ b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml @@ -57,6 +57,8 @@ required: - "#address-cells" - "#size-cells" +additionalProperties: true + examples: - | soundwire@c2d0000 { diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index c6a2f543648b..2b154803b181 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -140,6 +140,8 @@ patternProperties: - compatible - reg +additionalProperties: true + examples: - | spi@f00 { diff --git a/Documentation/devicetree/bindings/spmi/spmi.yaml b/Documentation/devicetree/bindings/spmi/spmi.yaml index 0cfbf56ba825..173940930719 100644 --- a/Documentation/devicetree/bindings/spmi/spmi.yaml +++ b/Documentation/devicetree/bindings/spmi/spmi.yaml @@ -55,6 +55,8 @@ patternProperties: required: - reg +additionalProperties: true + examples: - | #include <dt-bindings/spmi/spmi.h> diff --git a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml index ad4beaf02842..f004779ba9b3 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml @@ -49,6 +49,8 @@ properties: and the second cell is the maximum cooling state requested. const: 2 +additionalProperties: true + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml index 727d04550324..9f747921e851 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml @@ -36,6 +36,8 @@ properties: containing several internal sensors. enum: [0, 1] +additionalProperties: true + examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml index 8eaf4b6c4735..f6819bf2a3b5 100644 --- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml +++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml @@ -32,6 +32,8 @@ required: - interrupts - interrupt-names +additionalProperties: true + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml index 7263b7f2b510..b545b087b342 100644 --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml @@ -22,6 +22,8 @@ properties: description: Name specifier for the USB PHY +additionalProperties: true + examples: - | usb { diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml index 187bf6cb62bf..4e2c26cd981d 100644 --- a/Documentation/devicetree/bindings/watchdog/watchdog.yaml +++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml @@ -23,4 +23,6 @@ properties: description: Contains the watchdog timeout in seconds. +additionalProperties: true + ...
In order to add meta-schema checks for additional/unevaluatedProperties being present, all schema need to make this explicit. As common/shared schema are included by other schemas, they should always allow for additionalProperties. Signed-off-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/arm/cpus.yaml | 2 ++ .../devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml | 2 ++ Documentation/devicetree/bindings/ata/pata-common.yaml | 2 ++ Documentation/devicetree/bindings/ata/sata-common.yaml | 2 ++ Documentation/devicetree/bindings/bus/simple-pm-bus.yaml | 2 ++ .../devicetree/bindings/chrome/google,cros-ec-typec.yaml | 2 ++ .../devicetree/bindings/connector/usb-connector.yaml | 2 ++ .../devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml | 2 ++ .../devicetree/bindings/display/dsi-controller.yaml | 2 ++ Documentation/devicetree/bindings/display/panel/lvds.yaml | 2 ++ .../devicetree/bindings/display/panel/panel-common.yaml | 2 ++ Documentation/devicetree/bindings/dma/dma-common.yaml | 2 ++ Documentation/devicetree/bindings/dma/dma-controller.yaml | 2 ++ Documentation/devicetree/bindings/dma/dma-router.yaml | 2 ++ Documentation/devicetree/bindings/extcon/wlf,arizona.yaml | 2 ++ .../devicetree/bindings/iio/adc/samsung,exynos-adc.yaml | 5 ++++- Documentation/devicetree/bindings/iio/common.yaml | 2 ++ Documentation/devicetree/bindings/input/input.yaml | 2 ++ Documentation/devicetree/bindings/input/matrix-keymap.yaml | 2 ++ .../devicetree/bindings/input/touchscreen/touchscreen.yaml | 2 ++ Documentation/devicetree/bindings/leds/common.yaml | 2 ++ .../devicetree/bindings/leds/leds-class-multicolor.yaml | 3 +++ Documentation/devicetree/bindings/leds/trigger-source.yaml | 2 ++ Documentation/devicetree/bindings/media/rc.yaml | 2 ++ Documentation/devicetree/bindings/mfd/syscon.yaml | 2 +- Documentation/devicetree/bindings/mmc/mmc-controller.yaml | 2 ++ .../devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml | 2 ++ Documentation/devicetree/bindings/mtd/nand-controller.yaml | 2 ++ .../devicetree/bindings/net/can/can-transceiver.yaml | 2 ++ Documentation/devicetree/bindings/net/dsa/dsa.yaml | 2 ++ .../devicetree/bindings/net/ethernet-controller.yaml | 2 ++ Documentation/devicetree/bindings/net/ethernet-phy.yaml | 2 ++ Documentation/devicetree/bindings/net/mdio.yaml | 2 ++ Documentation/devicetree/bindings/net/snps,dwmac.yaml | 2 ++ Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml | 2 ++ Documentation/devicetree/bindings/nvmem/nvmem.yaml | 2 ++ Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml | 2 ++ Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml | 2 ++ Documentation/devicetree/bindings/pci/cdns-pcie.yaml | 2 ++ Documentation/devicetree/bindings/pci/pci-ep.yaml | 2 ++ Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml | 2 ++ Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml | 2 ++ Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml | 2 ++ Documentation/devicetree/bindings/power/power-domain.yaml | 2 ++ .../devicetree/bindings/power/supply/power-supply.yaml | 2 ++ Documentation/devicetree/bindings/pwm/pwm.yaml | 2 ++ Documentation/devicetree/bindings/regulator/regulator.yaml | 2 ++ Documentation/devicetree/bindings/regulator/wlf,arizona.yaml | 2 ++ Documentation/devicetree/bindings/riscv/cpus.yaml | 2 ++ Documentation/devicetree/bindings/rtc/rtc.yaml | 2 ++ Documentation/devicetree/bindings/serial/rs485.yaml | 3 +++ Documentation/devicetree/bindings/serial/serial.yaml | 2 ++ Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml | 2 ++ Documentation/devicetree/bindings/sound/amlogic,aiu.yaml | 2 ++ Documentation/devicetree/bindings/sound/cirrus,madera.yaml | 2 ++ .../devicetree/bindings/sound/nvidia,tegra210-ahub.yaml | 3 +++ Documentation/devicetree/bindings/sound/wlf,arizona.yaml | 2 ++ .../devicetree/bindings/soundwire/soundwire-controller.yaml | 2 ++ Documentation/devicetree/bindings/spi/spi-controller.yaml | 2 ++ Documentation/devicetree/bindings/spmi/spmi.yaml | 2 ++ .../devicetree/bindings/thermal/thermal-cooling-devices.yaml | 2 ++ .../devicetree/bindings/thermal/thermal-sensor.yaml | 2 ++ Documentation/devicetree/bindings/usb/ti,tps6598x.yaml | 2 ++ Documentation/devicetree/bindings/usb/usb-hcd.yaml | 2 ++ Documentation/devicetree/bindings/watchdog/watchdog.yaml | 2 ++ 65 files changed, 134 insertions(+), 2 deletions(-)