| Message ID | 20220422143643.727871-8-Frank.Li@nxp.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Enable designware PCI EP EDMA locally | expand |
On Fri, Apr 22, 2022 at 09:36:41AM -0500, Frank Li wrote: > Add a "flags" field to the "struct dw_edma_chip" so that the controller > drivers can pass flags that are relevant to the platform. > > DW_EDMA_CHIP_LOCAL - Used by the controller drivers accessing eDMA > locally. Local eDMA access doesn't require generating MSIs to the remote. > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Thanks, Mani > --- > Change from v7 to v9 > -none > Change from v6 to v7 > - dw_edma_chip_flags to u32 > Change from v5 to v6 > - use enum instead of define > > Change from v4 to v5 > - split two two patch > - rework commit message > Change from v3 to v4 > none > Change from v2 to v3 > - rework commit message > - Change to DW_EDMA_CHIP_32BIT_DBI > - using DW_EDMA_CHIP_LOCAL control msi > - Apply Bjorn's comments, > if (!j) { > control |= DW_EDMA_V0_LIE; > if (!(chan->chip->flags & DW_EDMA_CHIP_LOCAL)) > control |= DW_EDMA_V0_RIE; > } > > if ((chan->chip->flags & DW_EDMA_CHIP_REG32BIT) || > !IS_ENABLED(CONFIG_64BIT)) { > SET_CH_32(...); > SET_CH_32(...); > } else { > SET_CH_64(...); > } > > > Change from v1 to v2 > - none > > drivers/dma/dw-edma/dw-edma-v0-core.c | 9 ++++++--- > include/linux/dma/edma.h | 10 ++++++++++ > 2 files changed, 16 insertions(+), 3 deletions(-) > > diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.c b/drivers/dma/dw-edma/dw-edma-v0-core.c > index c59e23b9f9fdb..2ab1059a3de1e 100644 > --- a/drivers/dma/dw-edma/dw-edma-v0-core.c > +++ b/drivers/dma/dw-edma/dw-edma-v0-core.c > @@ -301,6 +301,7 @@ u32 dw_edma_v0_core_status_abort_int(struct dw_edma *dw, enum dw_edma_dir dir) > static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk) > { > struct dw_edma_burst *child; > + struct dw_edma_chan *chan = chunk->chan; > struct dw_edma_v0_lli __iomem *lli; > struct dw_edma_v0_llp __iomem *llp; > u32 control = 0, i = 0; > @@ -314,9 +315,11 @@ static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk) > j = chunk->bursts_alloc; > list_for_each_entry(child, &chunk->burst->list, list) { > j--; > - if (!j) > - control |= (DW_EDMA_V0_LIE | DW_EDMA_V0_RIE); > - > + if (!j) { > + control |= DW_EDMA_V0_LIE; > + if (!(chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL)) > + control |= DW_EDMA_V0_RIE; > + } > /* Channel control */ > SET_LL_32(&lli[i].control, control); > /* Transfer size */ > diff --git a/include/linux/dma/edma.h b/include/linux/dma/edma.h > index c2039246fc08c..fbd05a7284934 100644 > --- a/include/linux/dma/edma.h > +++ b/include/linux/dma/edma.h > @@ -33,12 +33,21 @@ enum dw_edma_map_format { > EDMA_MF_HDMA_COMPAT = 0x5 > }; > > +/** > + * enum dw_edma_chip_flags - Flags specific to an eDMA chip > + * @DW_EDMA_CHIP_LOCAL: eDMA is used locally by an endpoint > + */ > +enum dw_edma_chip_flags { > + DW_EDMA_CHIP_LOCAL = BIT(0), > +}; > + > /** > * struct dw_edma_chip - representation of DesignWare eDMA controller hardware > * @dev: struct device of the eDMA controller > * @id: instance ID > * @nr_irqs: total dma irq number > * @ops DMA channel to IRQ number mapping > + * @flags dw_edma_chip_flags > * @reg_base DMA register base address > * @ll_wr_cnt DMA write link list number > * @ll_rd_cnt DMA read link list number > @@ -53,6 +62,7 @@ struct dw_edma_chip { > int id; > int nr_irqs; > const struct dw_edma_core_ops *ops; > + u32 flags; > > void __iomem *reg_base; > > -- > 2.35.1 >
diff --git a/drivers/dma/dw-edma/dw-edma-v0-core.c b/drivers/dma/dw-edma/dw-edma-v0-core.c index c59e23b9f9fdb..2ab1059a3de1e 100644 --- a/drivers/dma/dw-edma/dw-edma-v0-core.c +++ b/drivers/dma/dw-edma/dw-edma-v0-core.c @@ -301,6 +301,7 @@ u32 dw_edma_v0_core_status_abort_int(struct dw_edma *dw, enum dw_edma_dir dir) static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk) { struct dw_edma_burst *child; + struct dw_edma_chan *chan = chunk->chan; struct dw_edma_v0_lli __iomem *lli; struct dw_edma_v0_llp __iomem *llp; u32 control = 0, i = 0; @@ -314,9 +315,11 @@ static void dw_edma_v0_core_write_chunk(struct dw_edma_chunk *chunk) j = chunk->bursts_alloc; list_for_each_entry(child, &chunk->burst->list, list) { j--; - if (!j) - control |= (DW_EDMA_V0_LIE | DW_EDMA_V0_RIE); - + if (!j) { + control |= DW_EDMA_V0_LIE; + if (!(chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL)) + control |= DW_EDMA_V0_RIE; + } /* Channel control */ SET_LL_32(&lli[i].control, control); /* Transfer size */ diff --git a/include/linux/dma/edma.h b/include/linux/dma/edma.h index c2039246fc08c..fbd05a7284934 100644 --- a/include/linux/dma/edma.h +++ b/include/linux/dma/edma.h @@ -33,12 +33,21 @@ enum dw_edma_map_format { EDMA_MF_HDMA_COMPAT = 0x5 }; +/** + * enum dw_edma_chip_flags - Flags specific to an eDMA chip + * @DW_EDMA_CHIP_LOCAL: eDMA is used locally by an endpoint + */ +enum dw_edma_chip_flags { + DW_EDMA_CHIP_LOCAL = BIT(0), +}; + /** * struct dw_edma_chip - representation of DesignWare eDMA controller hardware * @dev: struct device of the eDMA controller * @id: instance ID * @nr_irqs: total dma irq number * @ops DMA channel to IRQ number mapping + * @flags dw_edma_chip_flags * @reg_base DMA register base address * @ll_wr_cnt DMA write link list number * @ll_rd_cnt DMA read link list number @@ -53,6 +62,7 @@ struct dw_edma_chip { int id; int nr_irqs; const struct dw_edma_core_ops *ops; + u32 flags; void __iomem *reg_base;