| Message ID | 20240927063108.2773304-3-quic_msavaliy@quicinc.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Enable shared SE support over I2C | expand |
On 27-09-24, 12:01, Mukesh Kumar Savaliya wrote: > GSI DMA provides specific TREs namely Lock and Unlock TRE, which > provides mutual exclusive access to SE from any of the subsystem > (E.g. Apps, TZ, ADSP etc). Lock prevents other subsystems from > concurrently performing DMA transfers and avoids disturbance to > data path. Basically for shared SE usecase, lock the SE for > particular subsystem, complete the transfer, unlock the SE. it is dmaengine: xxx so please update that > > Apply Lock TRE for the first transfer of shared SE and Apply Unlock > TRE for the last transfer. > > Also change MAX_TRE macro to 5 from 3 because of the two additional TREs. > > TRE = Transfer Ring Element, refers to the queued descriptor. > SE = Serial Engine > SS = Subsystems (Apps processor, TZ, ADSP, Modem) > > Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> > --- > drivers/dma/qcom/gpi.c | 37 +++++++++++++++++++++++++++++++- > include/linux/dma/qcom-gpi-dma.h | 6 ++++++ > 2 files changed, 42 insertions(+), 1 deletion(-) > > diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c > index 52a7c8f2498f..120d91234442 100644 > --- a/drivers/dma/qcom/gpi.c > +++ b/drivers/dma/qcom/gpi.c > @@ -2,6 +2,7 @@ > /* > * Copyright (c) 2017-2020, The Linux Foundation. All rights reserved. > * Copyright (c) 2020, Linaro Limited > + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. > */ > > #include <dt-bindings/dma/qcom-gpi.h> > @@ -65,6 +66,14 @@ > /* DMA TRE */ > #define TRE_DMA_LEN GENMASK(23, 0) > > +/* Lock TRE */ > +#define TRE_I2C_LOCK BIT(0) > +#define TRE_MINOR_TYPE GENMASK(19, 16) > +#define TRE_MAJOR_TYPE GENMASK(23, 20) > + > +/* Unlock TRE */ > +#define TRE_I2C_UNLOCK BIT(8) > + > /* Register offsets from gpi-top */ > #define GPII_n_CH_k_CNTXT_0_OFFS(n, k) (0x20000 + (0x4000 * (n)) + (0x80 * (k))) > #define GPII_n_CH_k_CNTXT_0_EL_SIZE GENMASK(31, 24) > @@ -516,7 +525,7 @@ struct gpii { > bool ieob_set; > }; > > -#define MAX_TRE 3 > +#define MAX_TRE 5 > > struct gpi_desc { > struct virt_dma_desc vd; > @@ -1637,6 +1646,19 @@ static int gpi_create_i2c_tre(struct gchan *chan, struct gpi_desc *desc, > struct gpi_tre *tre; > unsigned int i; > > + /* create lock tre for first tranfser */ > + if (i2c->shared_se && i2c->first_msg) { > + tre = &desc->tre[tre_idx]; > + tre_idx++; > + > + tre->dword[0] = 0; > + tre->dword[1] = 0; > + tre->dword[2] = 0; > + tre->dword[3] = u32_encode_bits(1, TRE_I2C_LOCK); > + tre->dword[3] |= u32_encode_bits(0, TRE_MINOR_TYPE); > + tre->dword[3] |= u32_encode_bits(3, TRE_MAJOR_TYPE); > + } > + > /* first create config tre if applicable */ > if (i2c->set_config) { > tre = &desc->tre[tre_idx]; > @@ -1695,6 +1717,19 @@ static int gpi_create_i2c_tre(struct gchan *chan, struct gpi_desc *desc, > tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_IEOT); > } > > + /* Unlock tre for last transfer */ > + if (i2c->shared_se && i2c->last_msg && i2c->op != I2C_READ) { > + tre = &desc->tre[tre_idx]; > + tre_idx++; > + > + tre->dword[0] = 0; > + tre->dword[1] = 0; > + tre->dword[2] = 0; > + tre->dword[3] = u32_encode_bits(1, TRE_I2C_UNLOCK); > + tre->dword[3] |= u32_encode_bits(1, TRE_MINOR_TYPE); > + tre->dword[3] |= u32_encode_bits(3, TRE_MAJOR_TYPE); > + } > + > for (i = 0; i < tre_idx; i++) > dev_dbg(dev, "TRE:%d %x:%x:%x:%x\n", i, desc->tre[i].dword[0], > desc->tre[i].dword[1], desc->tre[i].dword[2], desc->tre[i].dword[3]); > diff --git a/include/linux/dma/qcom-gpi-dma.h b/include/linux/dma/qcom-gpi-dma.h > index 6680dd1a43c6..8589c711afae 100644 > --- a/include/linux/dma/qcom-gpi-dma.h > +++ b/include/linux/dma/qcom-gpi-dma.h > @@ -65,6 +65,9 @@ enum i2c_op { > * @rx_len: receive length for buffer > * @op: i2c cmd > * @muli-msg: is part of multi i2c r-w msgs > + * @shared_se: bus is shared between subsystems > + * @bool first_msg: use it for tracking multimessage xfer > + * @bool last_msg: use it for tracking multimessage xfer > */ > struct gpi_i2c_config { > u8 set_config; > @@ -78,6 +81,9 @@ struct gpi_i2c_config { > u32 rx_len; > enum i2c_op op; > bool multi_msg; > + bool shared_se; > + bool first_msg; > + bool last_msg; Looking at the usage in following patches, why cant this be handled internally as part of prep call? > }; > > #endif /* QCOM_GPI_DMA_H */ > -- > 2.25.1
On 27.09.2024 8:31 AM, Mukesh Kumar Savaliya wrote: > GSI DMA provides specific TREs namely Lock and Unlock TRE, which > provides mutual exclusive access to SE from any of the subsystem > (E.g. Apps, TZ, ADSP etc). Lock prevents other subsystems from > concurrently performing DMA transfers and avoids disturbance to > data path. Basically for shared SE usecase, lock the SE for > particular subsystem, complete the transfer, unlock the SE. > > Apply Lock TRE for the first transfer of shared SE and Apply Unlock > TRE for the last transfer. > > Also change MAX_TRE macro to 5 from 3 because of the two additional TREs. > > TRE = Transfer Ring Element, refers to the queued descriptor. > SE = Serial Engine > SS = Subsystems (Apps processor, TZ, ADSP, Modem) > > Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> > --- > drivers/dma/qcom/gpi.c | 37 +++++++++++++++++++++++++++++++- > include/linux/dma/qcom-gpi-dma.h | 6 ++++++ > 2 files changed, 42 insertions(+), 1 deletion(-) > > diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c > index 52a7c8f2498f..120d91234442 100644 > --- a/drivers/dma/qcom/gpi.c > +++ b/drivers/dma/qcom/gpi.c > @@ -2,6 +2,7 @@ > /* > * Copyright (c) 2017-2020, The Linux Foundation. All rights reserved. > * Copyright (c) 2020, Linaro Limited > + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. > */ > > #include <dt-bindings/dma/qcom-gpi.h> > @@ -65,6 +66,14 @@ > /* DMA TRE */ > #define TRE_DMA_LEN GENMASK(23, 0) > > +/* Lock TRE */ > +#define TRE_I2C_LOCK BIT(0) > +#define TRE_MINOR_TYPE GENMASK(19, 16) > +#define TRE_MAJOR_TYPE GENMASK(23, 20) Is this solely I2C specific? Konrad
Thanks Konrad for the review ! On 10/26/2024 12:18 AM, Konrad Dybcio wrote: > On 27.09.2024 8:31 AM, Mukesh Kumar Savaliya wrote: >> GSI DMA provides specific TREs namely Lock and Unlock TRE, which >> provides mutual exclusive access to SE from any of the subsystem >> (E.g. Apps, TZ, ADSP etc). Lock prevents other subsystems from >> concurrently performing DMA transfers and avoids disturbance to >> data path. Basically for shared SE usecase, lock the SE for >> particular subsystem, complete the transfer, unlock the SE. >> >> Apply Lock TRE for the first transfer of shared SE and Apply Unlock >> TRE for the last transfer. >> >> Also change MAX_TRE macro to 5 from 3 because of the two additional TREs. >> >> TRE = Transfer Ring Element, refers to the queued descriptor. >> SE = Serial Engine >> SS = Subsystems (Apps processor, TZ, ADSP, Modem) >> >> Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> >> --- >> drivers/dma/qcom/gpi.c | 37 +++++++++++++++++++++++++++++++- >> include/linux/dma/qcom-gpi-dma.h | 6 ++++++ >> 2 files changed, 42 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c >> index 52a7c8f2498f..120d91234442 100644 >> --- a/drivers/dma/qcom/gpi.c >> +++ b/drivers/dma/qcom/gpi.c >> @@ -2,6 +2,7 @@ >> /* >> * Copyright (c) 2017-2020, The Linux Foundation. All rights reserved. >> * Copyright (c) 2020, Linaro Limited >> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. >> */ >> >> #include <dt-bindings/dma/qcom-gpi.h> >> @@ -65,6 +66,14 @@ >> /* DMA TRE */ >> #define TRE_DMA_LEN GENMASK(23, 0) >> >> +/* Lock TRE */ >> +#define TRE_I2C_LOCK BIT(0) >> +#define TRE_MINOR_TYPE GENMASK(19, 16) >> +#define TRE_MAJOR_TYPE GENMASK(23, 20) > > Is this solely I2C specific? > No, its generic. So i guess i should rename to TRE_LOCK only, we can use for other protocols in future. Thanks! > Konrad
Thanks Vinod for your review comments ! On 10/15/2024 12:01 AM, Vinod Koul wrote: > On 27-09-24, 12:01, Mukesh Kumar Savaliya wrote: >> GSI DMA provides specific TREs namely Lock and Unlock TRE, which >> provides mutual exclusive access to SE from any of the subsystem >> (E.g. Apps, TZ, ADSP etc). Lock prevents other subsystems from >> concurrently performing DMA transfers and avoids disturbance to >> data path. Basically for shared SE usecase, lock the SE for >> particular subsystem, complete the transfer, unlock the SE. > > it is dmaengine: xxx so please update that > Done >> >> Apply Lock TRE for the first transfer of shared SE and Apply Unlock >> TRE for the last transfer. >> >> Also change MAX_TRE macro to 5 from 3 because of the two additional TREs. >> >> TRE = Transfer Ring Element, refers to the queued descriptor. >> SE = Serial Engine >> SS = Subsystems (Apps processor, TZ, ADSP, Modem) >> >> Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> >> --- >> drivers/dma/qcom/gpi.c | 37 +++++++++++++++++++++++++++++++- >> include/linux/dma/qcom-gpi-dma.h | 6 ++++++ >> 2 files changed, 42 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c >> index 52a7c8f2498f..120d91234442 100644 >> --- a/drivers/dma/qcom/gpi.c >> +++ b/drivers/dma/qcom/gpi.c >> @@ -2,6 +2,7 @@ >> /* >> * Copyright (c) 2017-2020, The Linux Foundation. All rights reserved. >> * Copyright (c) 2020, Linaro Limited >> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. >> */ >> >> #include <dt-bindings/dma/qcom-gpi.h> >> @@ -65,6 +66,14 @@ >> /* DMA TRE */ >> #define TRE_DMA_LEN GENMASK(23, 0) >> >> +/* Lock TRE */ >> +#define TRE_I2C_LOCK BIT(0) >> +#define TRE_MINOR_TYPE GENMASK(19, 16) >> +#define TRE_MAJOR_TYPE GENMASK(23, 20) >> + >> +/* Unlock TRE */ >> +#define TRE_I2C_UNLOCK BIT(8) >> + >> /* Register offsets from gpi-top */ >> #define GPII_n_CH_k_CNTXT_0_OFFS(n, k) (0x20000 + (0x4000 * (n)) + (0x80 * (k))) >> #define GPII_n_CH_k_CNTXT_0_EL_SIZE GENMASK(31, 24) >> @@ -516,7 +525,7 @@ struct gpii { >> bool ieob_set; >> }; >> >> -#define MAX_TRE 3 >> +#define MAX_TRE 5 >> >> struct gpi_desc { >> struct virt_dma_desc vd; >> @@ -1637,6 +1646,19 @@ static int gpi_create_i2c_tre(struct gchan *chan, struct gpi_desc *desc, >> struct gpi_tre *tre; >> unsigned int i; >> >> + /* create lock tre for first tranfser */ >> + if (i2c->shared_se && i2c->first_msg) { >> + tre = &desc->tre[tre_idx]; >> + tre_idx++; >> + >> + tre->dword[0] = 0; >> + tre->dword[1] = 0; >> + tre->dword[2] = 0; >> + tre->dword[3] = u32_encode_bits(1, TRE_I2C_LOCK); >> + tre->dword[3] |= u32_encode_bits(0, TRE_MINOR_TYPE); >> + tre->dword[3] |= u32_encode_bits(3, TRE_MAJOR_TYPE); >> + } >> + >> /* first create config tre if applicable */ >> if (i2c->set_config) { >> tre = &desc->tre[tre_idx]; >> @@ -1695,6 +1717,19 @@ static int gpi_create_i2c_tre(struct gchan *chan, struct gpi_desc *desc, >> tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_IEOT); >> } >> >> + /* Unlock tre for last transfer */ >> + if (i2c->shared_se && i2c->last_msg && i2c->op != I2C_READ) { >> + tre = &desc->tre[tre_idx]; >> + tre_idx++; >> + >> + tre->dword[0] = 0; >> + tre->dword[1] = 0; >> + tre->dword[2] = 0; >> + tre->dword[3] = u32_encode_bits(1, TRE_I2C_UNLOCK); >> + tre->dword[3] |= u32_encode_bits(1, TRE_MINOR_TYPE); >> + tre->dword[3] |= u32_encode_bits(3, TRE_MAJOR_TYPE); >> + } >> + >> for (i = 0; i < tre_idx; i++) >> dev_dbg(dev, "TRE:%d %x:%x:%x:%x\n", i, desc->tre[i].dword[0], >> desc->tre[i].dword[1], desc->tre[i].dword[2], desc->tre[i].dword[3]); >> diff --git a/include/linux/dma/qcom-gpi-dma.h b/include/linux/dma/qcom-gpi-dma.h >> index 6680dd1a43c6..8589c711afae 100644 >> --- a/include/linux/dma/qcom-gpi-dma.h >> +++ b/include/linux/dma/qcom-gpi-dma.h >> @@ -65,6 +65,9 @@ enum i2c_op { >> * @rx_len: receive length for buffer >> * @op: i2c cmd >> * @muli-msg: is part of multi i2c r-w msgs >> + * @shared_se: bus is shared between subsystems >> + * @bool first_msg: use it for tracking multimessage xfer >> + * @bool last_msg: use it for tracking multimessage xfer >> */ >> struct gpi_i2c_config { >> u8 set_config; >> @@ -78,6 +81,9 @@ struct gpi_i2c_config { >> u32 rx_len; >> enum i2c_op op; >> bool multi_msg; >> + bool shared_se; >> + bool first_msg; >> + bool last_msg; > > Looking at the usage in following patches, why cant this be handled > internally as part of prep call? > As per design, i2c driver iterates over each message and submits to GPI where it creates TRE. Since it's per transfer, we need to create Lock and Unlock TRE based on first or last message. > >> }; >> >> #endif /* QCOM_GPI_DMA_H */ >> -- >> 2.25.1 >
diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c index 52a7c8f2498f..120d91234442 100644 --- a/drivers/dma/qcom/gpi.c +++ b/drivers/dma/qcom/gpi.c @@ -2,6 +2,7 @@ /* * Copyright (c) 2017-2020, The Linux Foundation. All rights reserved. * Copyright (c) 2020, Linaro Limited + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. */ #include <dt-bindings/dma/qcom-gpi.h> @@ -65,6 +66,14 @@ /* DMA TRE */ #define TRE_DMA_LEN GENMASK(23, 0) +/* Lock TRE */ +#define TRE_I2C_LOCK BIT(0) +#define TRE_MINOR_TYPE GENMASK(19, 16) +#define TRE_MAJOR_TYPE GENMASK(23, 20) + +/* Unlock TRE */ +#define TRE_I2C_UNLOCK BIT(8) + /* Register offsets from gpi-top */ #define GPII_n_CH_k_CNTXT_0_OFFS(n, k) (0x20000 + (0x4000 * (n)) + (0x80 * (k))) #define GPII_n_CH_k_CNTXT_0_EL_SIZE GENMASK(31, 24) @@ -516,7 +525,7 @@ struct gpii { bool ieob_set; }; -#define MAX_TRE 3 +#define MAX_TRE 5 struct gpi_desc { struct virt_dma_desc vd; @@ -1637,6 +1646,19 @@ static int gpi_create_i2c_tre(struct gchan *chan, struct gpi_desc *desc, struct gpi_tre *tre; unsigned int i; + /* create lock tre for first tranfser */ + if (i2c->shared_se && i2c->first_msg) { + tre = &desc->tre[tre_idx]; + tre_idx++; + + tre->dword[0] = 0; + tre->dword[1] = 0; + tre->dword[2] = 0; + tre->dword[3] = u32_encode_bits(1, TRE_I2C_LOCK); + tre->dword[3] |= u32_encode_bits(0, TRE_MINOR_TYPE); + tre->dword[3] |= u32_encode_bits(3, TRE_MAJOR_TYPE); + } + /* first create config tre if applicable */ if (i2c->set_config) { tre = &desc->tre[tre_idx]; @@ -1695,6 +1717,19 @@ static int gpi_create_i2c_tre(struct gchan *chan, struct gpi_desc *desc, tre->dword[3] |= u32_encode_bits(1, TRE_FLAGS_IEOT); } + /* Unlock tre for last transfer */ + if (i2c->shared_se && i2c->last_msg && i2c->op != I2C_READ) { + tre = &desc->tre[tre_idx]; + tre_idx++; + + tre->dword[0] = 0; + tre->dword[1] = 0; + tre->dword[2] = 0; + tre->dword[3] = u32_encode_bits(1, TRE_I2C_UNLOCK); + tre->dword[3] |= u32_encode_bits(1, TRE_MINOR_TYPE); + tre->dword[3] |= u32_encode_bits(3, TRE_MAJOR_TYPE); + } + for (i = 0; i < tre_idx; i++) dev_dbg(dev, "TRE:%d %x:%x:%x:%x\n", i, desc->tre[i].dword[0], desc->tre[i].dword[1], desc->tre[i].dword[2], desc->tre[i].dword[3]); diff --git a/include/linux/dma/qcom-gpi-dma.h b/include/linux/dma/qcom-gpi-dma.h index 6680dd1a43c6..8589c711afae 100644 --- a/include/linux/dma/qcom-gpi-dma.h +++ b/include/linux/dma/qcom-gpi-dma.h @@ -65,6 +65,9 @@ enum i2c_op { * @rx_len: receive length for buffer * @op: i2c cmd * @muli-msg: is part of multi i2c r-w msgs + * @shared_se: bus is shared between subsystems + * @bool first_msg: use it for tracking multimessage xfer + * @bool last_msg: use it for tracking multimessage xfer */ struct gpi_i2c_config { u8 set_config; @@ -78,6 +81,9 @@ struct gpi_i2c_config { u32 rx_len; enum i2c_op op; bool multi_msg; + bool shared_se; + bool first_msg; + bool last_msg; }; #endif /* QCOM_GPI_DMA_H */
GSI DMA provides specific TREs namely Lock and Unlock TRE, which provides mutual exclusive access to SE from any of the subsystem (E.g. Apps, TZ, ADSP etc). Lock prevents other subsystems from concurrently performing DMA transfers and avoids disturbance to data path. Basically for shared SE usecase, lock the SE for particular subsystem, complete the transfer, unlock the SE. Apply Lock TRE for the first transfer of shared SE and Apply Unlock TRE for the last transfer. Also change MAX_TRE macro to 5 from 3 because of the two additional TREs. TRE = Transfer Ring Element, refers to the queued descriptor. SE = Serial Engine SS = Subsystems (Apps processor, TZ, ADSP, Modem) Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> --- drivers/dma/qcom/gpi.c | 37 +++++++++++++++++++++++++++++++- include/linux/dma/qcom-gpi-dma.h | 6 ++++++ 2 files changed, 42 insertions(+), 1 deletion(-)