From patchwork Wed Nov 13 17:53:23 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Florian Meier X-Patchwork-Id: 3179011 Return-Path: X-Original-To: patchwork-dmaengine@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id 0A5C19F3A0 for ; Wed, 13 Nov 2013 17:53:38 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 184B420791 for ; Wed, 13 Nov 2013 17:53:36 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id E0E5E2078B for ; Wed, 13 Nov 2013 17:53:33 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756914Ab3KMRxd (ORCPT ); Wed, 13 Nov 2013 12:53:33 -0500 Received: from mail-bk0-f53.google.com ([209.85.214.53]:51092 "EHLO mail-bk0-f53.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756573Ab3KMRxc (ORCPT ); Wed, 13 Nov 2013 12:53:32 -0500 Received: by mail-bk0-f53.google.com with SMTP id na10so521052bkb.26 for ; Wed, 13 Nov 2013 09:53:31 -0800 (PST) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:message-id:date:from:user-agent:mime-version:to :cc:subject:content-type:content-transfer-encoding; bh=I0Hxmz0oHcvnPCBzrhhHenutKoCprPQnLPK7bAWsKBI=; b=b2r2erFpF3BNLyMnpYgpBKLsUIOC+rlIoAzgeBjNUn+uA2s1mNbUbSw3PM8csrLaAc /r3lvrBhe62+fj0B7fiCUNl55w6U0WHNKp9UGtgTS15dCV4O+VdUr6NJJntd/ucBpiME v7t1S+OGYzB6aOUzQRGCgrYtAFHQDeirSLxK2Ff1e38f1FTQNJUwFP/E2tFATxvwNo3s 01gHxgFJJzjX27yu0l9ZwWyISsSozKpfzOpQhxOcvkAhLmyQKj3Gb6QFdz1dhfLqyFNl r6EgR36MJzk07kryY3266YLf8rpci5Zc+6jJPskhU5+9Yn7FqNQuH/U4vysY5uZWS13+ HDHg== X-Gm-Message-State: ALoCoQkybkh2dbLf3D1DLi+1W4JyER+9aCGAFnAkF1n/kjSb00jH2rmPdNFTqFtk4pSb9yird2n6 X-Received: by 10.204.202.139 with SMTP id fe11mr3542565bkb.26.1384365210854; Wed, 13 Nov 2013 09:53:30 -0800 (PST) Received: from [192.168.58.112] ([139.11.58.112]) by mx.google.com with ESMTPSA id pu8sm24298705bkb.9.2013.11.13.09.53.25 for (version=TLSv1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Wed, 13 Nov 2013 09:53:30 -0800 (PST) Message-ID: <5283BC93.1090801@koalo.de> Date: Wed, 13 Nov 2013 18:53:23 +0100 From: Florian Meier User-Agent: Mozilla/5.0 (X11; Linux i686; rv:24.0) Gecko/20100101 Thunderbird/24.0 MIME-Version: 1.0 To: Stephen Warren , Vinod Koul , Dan Williams , Russell King - ARM Linux CC: devicetree , alsa-devel@alsa-project.org, Liam Girdwood , linux-kernel@vger.kernel.org, Mark Brown , linux-rpi-kernel , dmaengine , linux-arm-kernel@lists.infradead.org Subject: [PATCHv4] dmaengine: Add support for BCM2835 Sender: dmaengine-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: dmaengine@vger.kernel.org X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Add support for DMA controller of BCM2835 as used in the Raspberry Pi. Currently it only supports cyclic DMA. Signed-off-by: Florian Meier --- Besides of many minor improvements (thanks to your helpful comments), this fourth version does the assignment of the virtual to the hardware channel already in probe. This simplifies things a lot (first of all the complex alloc_chan_resources is now gone). Regarding the maximum segment size: 0x3FFFFFFF is the maximum possible DMA transfer length value and I have no evidence that the maximum segment size is smaller. .../devicetree/bindings/dma/bcm2835-dma.txt | 59 ++ drivers/dma/Kconfig | 6 + drivers/dma/Makefile | 1 + drivers/dma/bcm2835-dma.c | 750 ++++++++++++++++++++ 4 files changed, 816 insertions(+) create mode 100644 Documentation/devicetree/bindings/dma/bcm2835-dma.txt create mode 100644 drivers/dma/bcm2835-dma.c diff --git a/Documentation/devicetree/bindings/dma/bcm2835-dma.txt b/Documentation/devicetree/bindings/dma/bcm2835-dma.txt new file mode 100644 index 0000000..bca5e84 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/bcm2835-dma.txt @@ -0,0 +1,59 @@ +* BCM2835 DMA controller + +Required properties: +- compatible: Should be "brcm,bcm2835-dma". +- reg: Should contain DMA registers location and length. +- interrupts: Should contain the DMA interrupts associated + to the DMA channels in ascending order. + First cell is the IRQ bank. + Second cell is the IRQ number. +- #dma-cells: Must be <1>, used to represent the number of integer cells in + the dmas property of client devices. +- dma-channels: Maximum number of DMA channels available. +- dma-requests: Number of DMA Requests. +- brcm,dma-channel-mask: Bit mask representing the channels available. + +Example: + +dma: dma@7e007000 { + compatible = "brcm,bcm2835-dma"; + reg = <0x7e007000 0xf00>; + interrupts = <1 16 + 1 17 + 1 18 + 1 19 + 1 20 + 1 21 + 1 22 + 1 23 + 1 24 + 1 25 + 1 26 + 1 27 + 1 28>; + + #dma-cells = <1>; + dma-channels = <16>; + dma-requests = <32>; + brcm,dma-channel-mask = <0x7f35>; +}; + +DMA clients connected to the BCM2835 DMA controller must use the format +described in the dma.txt file, using a two-cell specifier for each channel: +a phandle plus one integer cells. +The two cells in order are: + +1. A phandle pointing to the DMA controller. +2. The DREQ number. + +Example: + +bcm2835_i2s: i2s@7e203000 { + compatible = "brcm,bcm2835-i2s"; + reg = < 0x7e203000 0x20 + 0x7e101098 0x02>; + + dmas = <&dma 2 + &dma 3>; + dma-names = "tx", "rx"; +}; diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index c61a6ec..880e723 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -300,6 +300,12 @@ config DMA_OMAP select DMA_ENGINE select DMA_VIRTUAL_CHANNELS +config DMA_BCM2835 + tristate "BCM2835 DMA engine support" + depends on (ARCH_BCM2835 || MACH_BCM2708) + select DMA_ENGINE + select DMA_VIRTUAL_CHANNELS + config TI_CPPI41 tristate "AM33xx CPPI41 DMA support" depends on ARCH_OMAP diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 0ce2da9..0a6f08e 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -38,6 +38,7 @@ obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o obj-$(CONFIG_DMA_OMAP) += omap-dma.o +obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o obj-$(CONFIG_TI_CPPI41) += cppi41.o diff --git a/drivers/dma/bcm2835-dma.c b/drivers/dma/bcm2835-dma.c new file mode 100644 index 0000000..baf072e --- /dev/null +++ b/drivers/dma/bcm2835-dma.c @@ -0,0 +1,750 @@ +/* + * BCM2835 DMA engine support + * + * This driver only supports cyclic DMA transfers + * as needed for the I2S module. + * + * Author: Florian Meier, + * Copyright 2013 + * + * based on + * OMAP DMAengine support by Russell King + * + * BCM2708 DMA Driver + * Copyright (C) 2010 Broadcom + * + * Raspberry Pi PCM I2S ALSA Driver + * Copyright (c) by Phil Poole 2013 + * + * MARVELL MMP Peripheral DMA Driver + * Copyright 2012 Marvell International Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "virt-dma.h" + +struct bcm2835_dmadev { + struct dma_device ddev; + spinlock_t lock; + void __iomem *dma_base; + struct device_dma_parameters dma_parms; +}; + +struct bcm2835_dma_cb { + uint32_t info; + uint32_t src; + uint32_t dst; + uint32_t length; + uint32_t stride; + uint32_t next; + uint32_t pad[2]; +}; + +struct bcm2835_chan { + struct virt_dma_chan vc; + struct list_head node; + + struct dma_slave_config cfg; + bool cyclic; + unsigned dreq; + + int dma_ch; + struct bcm2835_desc *desc; + + void __iomem *dma_chan_base; + int dma_irq_number; +}; + +struct bcm2835_desc { + struct virt_dma_desc vd; + enum dma_transfer_direction dir; + + unsigned int control_block_size; + struct bcm2835_dma_cb *control_block_base; + dma_addr_t control_block_base_phys; + + unsigned frames; + size_t size; +}; + +#define BCM2835_DMA_CS 0x00 +#define BCM2835_DMA_ADDR 0x04 +#define BCM2835_DMA_SOURCE_AD 0x0c +#define BCM2835_DMA_DEST_AD 0x10 +#define BCM2835_DMA_NEXTCB 0x1C + +/* DMA CS Control and Status bits */ +#define BCM2835_DMA_ACTIVE (1 << 0) +#define BCM2835_DMA_INT (1 << 2) +#define BCM2835_DMA_ISPAUSED (1 << 4) /* Pause requested or not active */ +#define BCM2835_DMA_ISHELD (1 << 5) /* Is held by DREQ flow control */ +#define BCM2835_DMA_ERR (1 << 8) +#define BCM2835_DMA_ABORT (1 << 30) /* stop current CB, go to next, WO */ +#define BCM2835_DMA_RESET (1 << 31) /* WO, self clearing */ + +#define BCM2835_DMA_INT_EN (1 << 0) +#define BCM2835_DMA_D_INC (1 << 4) +#define BCM2835_DMA_D_DREQ (1 << 6) +#define BCM2835_DMA_S_INC (1 << 8) +#define BCM2835_DMA_S_DREQ (1 << 6) + +#define BCM2835_DMA_PER_MAP(x) ((x) << 16) + +#define BCM2835_DMA_DATA_TYPE_S8 1 +#define BCM2835_DMA_DATA_TYPE_S16 2 +#define BCM2835_DMA_DATA_TYPE_S32 4 +#define BCM2835_DMA_DATA_TYPE_S128 16 + +/* valid only for channels 0 - 14, 15 has its own base address */ +#define BCM2835_DMA_CHAN(n) ((n) << 8) /* base address */ +#define BCM2835_DMA_CHANIO(dma_base, n) ((dma_base) + BCM2835_DMA_CHAN(n)) + +static inline struct bcm2835_dmadev *to_bcm2835_dma_dev(struct dma_device *d) +{ + return container_of(d, struct bcm2835_dmadev, ddev); +} + +static inline struct bcm2835_chan *to_bcm2835_dma_chan(struct dma_chan *c) +{ + return container_of(c, struct bcm2835_chan, vc.chan); +} + +static inline struct bcm2835_desc *to_bcm2835_dma_desc( + struct dma_async_tx_descriptor *t) +{ + return container_of(t, struct bcm2835_desc, vd.tx); +} + +static void bcm2835_dma_desc_free(struct virt_dma_desc *vd) +{ + struct bcm2835_desc *desc = container_of(vd, struct bcm2835_desc, vd); + dma_free_coherent(desc->vd.tx.chan->device->dev, + desc->control_block_size, + desc->control_block_base, + desc->control_block_base_phys); + kfree(desc); +} + +static int bcm2835_dma_abort(void __iomem *dma_chan_base) +{ + unsigned long int cs; + int rc = 0; + + cs = readl(dma_chan_base + BCM2835_DMA_CS); + + if (BCM2835_DMA_ACTIVE & cs) { + long int timeout = 10000; + + /* write 0 to the active bit - pause the DMA */ + writel(0, dma_chan_base + BCM2835_DMA_CS); + + /* wait for any current AXI transfer to complete */ + while ((cs & BCM2835_DMA_ISPAUSED) && --timeout >= 0) + cs = readl(dma_chan_base + BCM2835_DMA_CS); + + if (cs & BCM2835_DMA_ISPAUSED) { + /* we'll un-pause when we set of our next DMA */ + rc = -ETIMEDOUT; + + } else if (BCM2835_DMA_ACTIVE & cs) { + /* terminate the control block chain */ + writel(0, dma_chan_base + BCM2835_DMA_NEXTCB); + + /* abort the whole DMA */ + writel(BCM2835_DMA_ABORT | BCM2835_DMA_ACTIVE, + dma_chan_base + BCM2835_DMA_CS); + } + } + + return rc; +} + +static void bcm2835_dma_start_desc(struct bcm2835_chan *c) +{ + struct virt_dma_desc *vd = vchan_next_desc(&c->vc); + struct bcm2835_desc *d; + + if (!vd) { + c->desc = NULL; + return; + } + + list_del(&vd->node); + + c->desc = d = to_bcm2835_dma_desc(&vd->tx); + + dsb(); /* ARM data synchronization (push) operation */ + + writel(d->control_block_base_phys, c->dma_chan_base + BCM2835_DMA_ADDR); + writel(BCM2835_DMA_ACTIVE, c->dma_chan_base + BCM2835_DMA_CS); +} + +static irqreturn_t bcm2835_dma_callback(int irq, void *data) +{ + struct bcm2835_chan *c = data; + struct bcm2835_desc *d; + unsigned long flags; + + spin_lock_irqsave(&c->vc.lock, flags); + + /* acknowledge interrupt */ + writel(BCM2835_DMA_INT, c->dma_chan_base + BCM2835_DMA_CS); + + d = c->desc; + + if (d) { + /* TODO Only works for cyclic DMA */ + vchan_cyclic_callback(&d->vd); + } + + /* keep the DMA engine running */ + dsb(); /* ARM synchronization barrier */ + writel(BCM2835_DMA_ACTIVE, c->dma_chan_base + BCM2835_DMA_CS); + + spin_unlock_irqrestore(&c->vc.lock, flags); + + return IRQ_HANDLED; +} + +static int bcm2835_dma_alloc_chan_resources(struct dma_chan *chan) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + + dev_dbg(c->vc.chan.device->dev, + "Allocating DMA channel %i\n", c->dma_ch); + + return request_irq(c->dma_irq_number, + bcm2835_dma_callback, 0, "DMA IRQ", c); +} + +static void bcm2835_dma_free_chan_resources(struct dma_chan *chan) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + + vchan_free_chan_resources(&c->vc); + free_irq(c->dma_irq_number, c); + + dev_dbg(c->vc.chan.device->dev, "Freeing DMA channel %u\n", c->dma_ch); +} + +static size_t bcm2835_dma_desc_size(struct bcm2835_desc *d) +{ + return d->size; +} + +static size_t bcm2835_dma_desc_size_pos(struct bcm2835_desc *d, dma_addr_t addr) +{ + unsigned i; + size_t size; + + for (size = i = 0; i < d->frames; i++) { + struct bcm2835_dma_cb *control_block = + &d->control_block_base[i]; + size_t this_size = control_block->length; + dma_addr_t dma; + + if (d->dir == DMA_DEV_TO_MEM) + dma = control_block->dst; + else + dma = control_block->src; + + if (size) + size += this_size; + else if (addr >= dma && addr < dma + this_size) + size += dma + this_size - addr; + } + + return size; +} + +static enum dma_status bcm2835_dma_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, struct dma_tx_state *txstate) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + struct virt_dma_desc *vd; + enum dma_status ret; + unsigned long flags; + + ret = dma_cookie_status(chan, cookie, txstate); + if (ret == DMA_SUCCESS || !txstate) + return ret; + + spin_lock_irqsave(&c->vc.lock, flags); + vd = vchan_find_desc(&c->vc, cookie); + if (vd) { + txstate->residue = + bcm2835_dma_desc_size(to_bcm2835_dma_desc(&vd->tx)); + } else if (c->desc && c->desc->vd.tx.cookie == cookie) { + struct bcm2835_desc *d = c->desc; + dma_addr_t pos; + + if (d->dir == DMA_MEM_TO_DEV) + pos = readl(c->dma_chan_base + BCM2835_DMA_SOURCE_AD); + else if (d->dir == DMA_DEV_TO_MEM) + pos = readl(c->dma_chan_base + BCM2835_DMA_DEST_AD); + else + pos = 0; + + txstate->residue = bcm2835_dma_desc_size_pos(d, pos); + } else { + txstate->residue = 0; + } + + spin_unlock_irqrestore(&c->vc.lock, flags); + + return ret; +} + +static void bcm2835_dma_issue_pending(struct dma_chan *chan) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + unsigned long flags; + + c->cyclic = true; /* nothing else is implemented */ + + spin_lock_irqsave(&c->vc.lock, flags); + if (vchan_issue_pending(&c->vc) && !c->desc) + bcm2835_dma_start_desc(c); + + spin_unlock_irqrestore(&c->vc.lock, flags); +} + + +static struct dma_async_tx_descriptor *bcm2835_dma_prep_dma_cyclic( + struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, + size_t period_len, enum dma_transfer_direction direction, + unsigned long flags, void *context) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + enum dma_slave_buswidth dev_width; + struct bcm2835_desc *d; + dma_addr_t dev_addr; + unsigned es, sync_type; + unsigned frame; + + /* Grab configuration */ + if (direction == DMA_DEV_TO_MEM) { + dev_addr = c->cfg.src_addr; + dev_width = c->cfg.src_addr_width; + sync_type = BCM2835_DMA_S_DREQ; + } else if (direction == DMA_MEM_TO_DEV) { + dev_addr = c->cfg.dst_addr; + dev_width = c->cfg.dst_addr_width; + sync_type = BCM2835_DMA_D_DREQ; + } else { + dev_err(chan->device->dev, "%s: bad direction?\n", __func__); + return NULL; + } + + /* Bus width translates to the element size (ES) */ + switch (dev_width) { + case DMA_SLAVE_BUSWIDTH_4_BYTES: + es = BCM2835_DMA_DATA_TYPE_S32; + break; + default: + return NULL; + } + + /* Now allocate and setup the descriptor. */ + d = kzalloc(sizeof(*d), GFP_NOWAIT); + if (!d) + return NULL; + + d->dir = direction; + d->frames = buf_len / period_len; + + /* Allocate memory for control blocks */ + d->control_block_size = d->frames * sizeof(struct bcm2835_dma_cb); + d->control_block_base = dma_alloc_coherent(chan->device->dev, + d->control_block_size, &d->control_block_base_phys, + GFP_NOWAIT); + + if (!d->control_block_base) { + kfree(d); + dev_err(chan->device->dev, + "%s: Memory allocation error\n", __func__); + return NULL; + } + + memset(d->control_block_base, 0, d->control_block_size); + + /* + * Iterate over all frames, create a control block + * for each frame and link them together. + */ + for (frame = 0; frame < d->frames; frame++) { + struct bcm2835_dma_cb *control_block = + &d->control_block_base[frame]; + + /* Setup adresses */ + if (d->dir == DMA_DEV_TO_MEM) { + control_block->info = BCM2835_DMA_D_INC; + control_block->src = dev_addr; + control_block->dst = buf_addr + frame * period_len; + } else { + control_block->info = BCM2835_DMA_S_INC; + control_block->src = buf_addr + frame * period_len; + control_block->dst = dev_addr; + } + + /* Enable interrupt */ + control_block->info |= BCM2835_DMA_INT_EN; + + /* Setup synchronization */ + if (sync_type != 0) + control_block->info |= sync_type; + + /* Setup DREQ channel */ + if (c->dreq != 0) + control_block->info |= + BCM2835_DMA_PER_MAP(c->dreq); + + /* Length of a frame */ + control_block->length = period_len; + d->size += control_block->length; + + /* + * Next block is the next frame. + * This DMA engine driver currently only supports cyclic DMA. + * Therefore, wrap around at number of frames. + */ + control_block->next = d->control_block_base_phys + + sizeof(struct bcm2835_dma_cb) + * ((frame + 1) % d->frames); + + /* The following fields are not used here */ + control_block->stride = 0; + control_block->pad[0] = 0; + control_block->pad[1] = 0; + } + + return vchan_tx_prep(&c->vc, &d->vd, flags); +} + +static int bcm2835_dma_slave_config(struct bcm2835_chan *c, + struct dma_slave_config *cfg) +{ + if ((cfg->direction == DMA_DEV_TO_MEM && + cfg->src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) || + (cfg->direction == DMA_MEM_TO_DEV && + cfg->dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES) || + (cfg->direction != DMA_DEV_TO_MEM && + cfg->direction != DMA_MEM_TO_DEV)) { + return -EINVAL; + } + + c->cfg = *cfg; + + return 0; +} + +static int bcm2835_dma_terminate_all(struct bcm2835_chan *c) +{ + struct bcm2835_dmadev *d = to_bcm2835_dma_dev(c->vc.chan.device); + unsigned long flags; + int timeout = 1000; + LIST_HEAD(head); + + spin_lock_irqsave(&c->vc.lock, flags); + + /* Prevent this channel being scheduled */ + spin_lock(&d->lock); + list_del_init(&c->node); + spin_unlock(&d->lock); + + /* + * Stop DMA activity: we assume the callback will not be called + * after bcm_dma_abort() returns (even if it does, it will see + * c->desc is NULL and exit.) + */ + if (c->desc) { + c->desc = NULL; + bcm2835_dma_abort(c->dma_chan_base); + + /* Wait for stopping */ + while (timeout > 0) { + timeout--; + if (!(readl(c->dma_chan_base + BCM2835_DMA_CS) & + BCM2835_DMA_ACTIVE)) + break; + + cpu_relax(); + } + + if (timeout <= 0) + dev_err(d->ddev.dev, "DMA transfer could not be terminated\n"); + } + + vchan_get_all_descriptors(&c->vc, &head); + spin_unlock_irqrestore(&c->vc.lock, flags); + vchan_dma_desc_free_list(&c->vc, &head); + + return 0; +} + +static int bcm2835_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, + unsigned long arg) +{ + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + int ret; + + switch (cmd) { + case DMA_SLAVE_CONFIG: + return bcm2835_dma_slave_config(c, + (struct dma_slave_config *)arg); + + case DMA_TERMINATE_ALL: + bcm2835_dma_terminate_all(c); + break; + + default: + ret = -ENXIO; + break; + } + + return ret; +} + +static int bcm2835_dma_chan_init(struct bcm2835_dmadev *d, int chan_id, int irq) +{ + struct bcm2835_chan *c; + + c = kzalloc(sizeof(*c), GFP_KERNEL); + if (!c) + return -ENOMEM; + + c->vc.desc_free = bcm2835_dma_desc_free; + vchan_init(&c->vc, &d->ddev); + INIT_LIST_HEAD(&c->node); + + d->ddev.chancnt++; + + c->dma_chan_base = BCM2835_DMA_CHANIO(d->dma_base, chan_id); + c->dma_ch = chan_id; + c->dma_irq_number = irq; + + return 0; +} + +static void bcm2835_dma_free(struct bcm2835_dmadev *od) +{ + while (!list_empty(&od->ddev.channels)) { + struct bcm2835_chan *c = list_first_entry(&od->ddev.channels, + struct bcm2835_chan, vc.chan.device_node); + + list_del(&c->vc.chan.device_node); + tasklet_kill(&c->vc.task); + kfree(c); + } +} + +#if defined(CONFIG_OF) +static const struct of_device_id bcm2835_dma_of_match[] = { + { .compatible = "brcm,bcm2835-dma", }, + {}, +}; +MODULE_DEVICE_TABLE(of, bcm2835_dma_of_match); +#endif + +static struct dma_chan *bcm2835_dma_xlate(struct of_phandle_args *dma_spec, + struct of_dma *ofdma) +{ + struct bcm2835_dmadev *d = ofdma->of_dma_data; + struct dma_chan *chan, *candidate; + +retry: + candidate = NULL; + + /* walk the list of channels registered with the current instance and + * find one that is currently unused */ + list_for_each_entry(chan, &d->ddev.channels, device_node) + if (chan->client_count == 0) { + candidate = chan; + break; + } + + if (!candidate) + return NULL; + + /* dma_get_slave_channel will return NULL if we lost a race between + * the lookup and the reservation */ + chan = dma_get_slave_channel(candidate); + + if (chan) { + struct bcm2835_chan *c = to_bcm2835_dma_chan(chan); + + /* Set DREQ from param */ + c->dreq = dma_spec->args[0]; + + return chan; + } + + goto retry; +} + +static int bcm2835_dma_device_slave_caps(struct dma_chan *dchan, + struct dma_slave_caps *caps) +{ + caps->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); + caps->dstn_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES); + caps->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); + caps->cmd_pause = false; + caps->cmd_terminate = true; + + return 0; +} + +static int bcm2835_dma_probe(struct platform_device *pdev) +{ + struct bcm2835_dmadev *od; + struct resource *dma_res = NULL; + void __iomem *dma_base = NULL; + int rc = 0; + int i = 0; + int irq; + uint32_t chans_available; + + if (!pdev->dev.dma_mask) + pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask; + + rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (rc) + return rc; + dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); + + od = devm_kzalloc(&pdev->dev, sizeof(*od), GFP_KERNEL); + if (!od) + return -ENOMEM; + + pdev->dev.dma_parms = &od->dma_parms; + dma_set_max_seg_size(&pdev->dev, 0x3FFFFFFF); + + dma_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + dma_base = devm_ioremap_resource(&pdev->dev, dma_res); + if (IS_ERR(dma_base)) + return PTR_ERR(dma_base); + + od->dma_base = dma_base; + + dma_cap_set(DMA_SLAVE, od->ddev.cap_mask); + dma_cap_set(DMA_CYCLIC, od->ddev.cap_mask); + od->ddev.device_alloc_chan_resources = bcm2835_dma_alloc_chan_resources; + od->ddev.device_free_chan_resources = bcm2835_dma_free_chan_resources; + od->ddev.device_tx_status = bcm2835_dma_tx_status; + od->ddev.device_issue_pending = bcm2835_dma_issue_pending; + od->ddev.device_slave_caps = bcm2835_dma_device_slave_caps; + od->ddev.device_prep_dma_cyclic = bcm2835_dma_prep_dma_cyclic; + od->ddev.device_control = bcm2835_dma_control; + od->ddev.dev = &pdev->dev; + INIT_LIST_HEAD(&od->ddev.channels); + spin_lock_init(&od->lock); + + platform_set_drvdata(pdev, od); + + if (pdev->dev.of_node) { + const void *chan_mask; + + /* Device-tree DMA controller registration */ + rc = of_dma_controller_register(pdev->dev.of_node, + bcm2835_dma_xlate, od); + if (rc) { + dev_err(&pdev->dev, "Failed to register DMA controller\n"); + dma_async_device_unregister(&od->ddev); + bcm2835_dma_free(od); + return rc; + } + + /* Request DMA channel mask from device tree */ + chan_mask = of_get_property(pdev->dev.of_node, + "brcm,dma-channel-mask", NULL); + + if (!chan_mask) { + dev_err(&pdev->dev, "Failed to get channel mask\n"); + dma_async_device_unregister(&od->ddev); + bcm2835_dma_free(od); + return -EINVAL; + } + + chans_available = be32_to_cpup(chan_mask); + + /* do not use the FIQ and BULK channels */ + chans_available &= ~0xD; + + for (i = 0; i < pdev->num_resources; i++) { + irq = platform_get_irq(pdev, i); + if (irq < 0) + break; + + if (chans_available & (1 << i)) { + rc = bcm2835_dma_chan_init(od, i, irq); + if (rc) { + bcm2835_dma_free(od); + return rc; + } + } + } + } + + dev_dbg(&pdev->dev, "Initialized %i DMA channels\n", i); + + rc = dma_async_device_register(&od->ddev); + if (rc) { + dev_err(&pdev->dev, + "Failed to register slave DMA engine device: %d\n", rc); + bcm2835_dma_free(od); + return rc; + } + + dev_dbg(&pdev->dev, "Load BCM2835 DMA engine driver\n"); + + return rc; +} + +static int bcm2835_dma_remove(struct platform_device *pdev) +{ + struct bcm2835_dmadev *od = platform_get_drvdata(pdev); + + dma_async_device_unregister(&od->ddev); + bcm2835_dma_free(od); + + return 0; +} + +static struct platform_driver bcm2835_dma_driver = { + .probe = bcm2835_dma_probe, + .remove = bcm2835_dma_remove, + .driver = { + .name = "bcm2835-dma", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(bcm2835_dma_of_match), + }, +}; + +module_platform_driver(bcm2835_dma_driver); + +MODULE_ALIAS("platform:bcm2835-dma"); +MODULE_DESCRIPTION("BCM2835 DMA engine driver"); +MODULE_AUTHOR("Florian Meier "); +MODULE_LICENSE("GPL v2");