| Message ID | 20210222161905.1153-5-lukas.bulwahn@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Remove dead linux-mips.org references | expand |
Reviewed-by: Huacai Chen <chenhuacai@kernel.org> On Tue, Feb 23, 2021 at 12:22 AM Lukas Bulwahn <lukas.bulwahn@gmail.com> wrote: > > The domain lookup for linux-mips.org fails for quite some time now. > Further, the two links: > > http://decstation.unix-ag.org/ > http://www.computer-refuge.org/classiccmp/ftp.digital.com/pub/DEC/TriAdd/ > > refer to old webpages or contain no further technical information. > > Remove all those dead references. > > Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> > --- > arch/mips/Kconfig | 8 +------- > arch/mips/jazz/Kconfig | 12 +++--------- > tools/include/nolibc/nolibc.h | 3 +-- > 3 files changed, 5 insertions(+), 18 deletions(-) > > diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig > index d89efba3d8a4..8cb1e2be5999 100644 > --- a/arch/mips/Kconfig > +++ b/arch/mips/Kconfig > @@ -375,9 +375,7 @@ config MACH_DECSTATION > select SYS_SUPPORTS_1024HZ > select MIPS_L1_CACHE_SHIFT_4 > help > - This enables support for DEC's MIPS based workstations. For details > - see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the > - DECstation porting pages on <http://decstation.unix-ag.org/>. > + This enables support for DEC's MIPS based workstations. > > If you have one of the following DECstation Models you definitely > want to choose R4xx0 for the CPU Type: > @@ -3263,10 +3261,6 @@ config TC > processors. TURBOchannel programming specifications are available > at: > <ftp://ftp.hp.com/pub/alphaserver/archive/triadd/> > - and: > - <http://www.computer-refuge.org/classiccmp/ftp.digital.com/pub/DEC/TriAdd/> > - Linux driver support status is documented at: > - <http://www.linux-mips.org/wiki/DECstation> > > config MMU > bool > diff --git a/arch/mips/jazz/Kconfig b/arch/mips/jazz/Kconfig > index 42932ca98db9..162d11670c75 100644 > --- a/arch/mips/jazz/Kconfig > +++ b/arch/mips/jazz/Kconfig > @@ -5,9 +5,7 @@ config ACER_PICA_61 > select DMA_NONCOHERENT > help > This is a machine with a R4400 133/150 MHz CPU. To compile a Linux > - kernel that runs on these, say Y here. For details about Linux on > - the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at > - <http://www.linux-mips.org/>. > + kernel that runs on these, say Y here. > > config MIPS_MAGNUM_4000 > bool "Support for MIPS Magnum 4000" > @@ -16,9 +14,7 @@ config MIPS_MAGNUM_4000 > select SYS_SUPPORTS_BIG_ENDIAN > help > This is a machine with a R4000 100 MHz CPU. To compile a Linux > - kernel that runs on these, say Y here. For details about Linux on > - the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at > - <http://www.linux-mips.org/>. > + kernel that runs on these, say Y here. > > config OLIVETTI_M700 > bool "Support for Olivetti M700-10" > @@ -26,6 +22,4 @@ config OLIVETTI_M700 > select DMA_NONCOHERENT > help > This is a machine with a R4000 100 MHz CPU. To compile a Linux > - kernel that runs on these, say Y here. For details about Linux on > - the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at > - <http://www.linux-mips.org/>. > + kernel that runs on these, say Y here. > diff --git a/tools/include/nolibc/nolibc.h b/tools/include/nolibc/nolibc.h > index 8b7a9830dd22..754e64c4a1d1 100644 > --- a/tools/include/nolibc/nolibc.h > +++ b/tools/include/nolibc/nolibc.h > @@ -1027,8 +1027,7 @@ struct sys_stat_struct { > * - arguments are in a0, a1, a2, a3, then the stack. The caller needs to > * leave some room in the stack for the callee to save a0..a3 if needed. > * - Many registers are clobbered, in fact only a0..a2 and s0..s8 are > - * preserved. See: https://www.linux-mips.org/wiki/Syscall as well as > - * scall32-o32.S in the kernel sources. > + * preserved. See: scall32-o32.S in the kernel sources. > * - the system call is performed by calling "syscall" > * - syscall return comes in v0, and register a3 needs to be checked to know > * if an error occured, in which case errno is in v0. > -- > 2.17.1 >
On Mon, Feb 22, 2021 at 5:22 PM Lukas Bulwahn <lukas.bulwahn@gmail.com> wrote: > > The domain lookup for linux-mips.org fails for quite some time now. > Further, the two links: > > http://decstation.unix-ag.org/ https://web.archive.org/web/20070609185805/http://decstation.unix-ag.org/ > http://www.computer-refuge.org/classiccmp/ftp.digital.com/pub/DEC/TriAdd/ > > refer to old webpages or contain no further technical information. > > Remove all those dead references. > > Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> > --- > arch/mips/Kconfig | 8 +------- > arch/mips/jazz/Kconfig | 12 +++--------- > tools/include/nolibc/nolibc.h | 3 +-- > 3 files changed, 5 insertions(+), 18 deletions(-)
On Tue, 23 Feb 2021, Philippe Mathieu-Daudé wrote: > On Mon, Feb 22, 2021 at 5:22 PM Lukas Bulwahn <lukas.bulwahn@gmail.com> wrote: > > > > The domain lookup for linux-mips.org fails for quite some time now. > > Further, the two links: > > > > http://decstation.unix-ag.org/ > > https://web.archive.org/web/20070609185805/http://decstation.unix-ag.org/ > > > http://www.computer-refuge.org/classiccmp/ftp.digital.com/pub/DEC/TriAdd/ ftp://ftp.hp.com/pub/alphaserver/archive/triadd/ (which is essentially the primary source back up) Maciej
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index d89efba3d8a4..8cb1e2be5999 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -375,9 +375,7 @@ config MACH_DECSTATION select SYS_SUPPORTS_1024HZ select MIPS_L1_CACHE_SHIFT_4 help - This enables support for DEC's MIPS based workstations. For details - see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the - DECstation porting pages on <http://decstation.unix-ag.org/>. + This enables support for DEC's MIPS based workstations. If you have one of the following DECstation Models you definitely want to choose R4xx0 for the CPU Type: @@ -3263,10 +3261,6 @@ config TC processors. TURBOchannel programming specifications are available at: <ftp://ftp.hp.com/pub/alphaserver/archive/triadd/> - and: - <http://www.computer-refuge.org/classiccmp/ftp.digital.com/pub/DEC/TriAdd/> - Linux driver support status is documented at: - <http://www.linux-mips.org/wiki/DECstation> config MMU bool diff --git a/arch/mips/jazz/Kconfig b/arch/mips/jazz/Kconfig index 42932ca98db9..162d11670c75 100644 --- a/arch/mips/jazz/Kconfig +++ b/arch/mips/jazz/Kconfig @@ -5,9 +5,7 @@ config ACER_PICA_61 select DMA_NONCOHERENT help This is a machine with a R4400 133/150 MHz CPU. To compile a Linux - kernel that runs on these, say Y here. For details about Linux on - the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at - <http://www.linux-mips.org/>. + kernel that runs on these, say Y here. config MIPS_MAGNUM_4000 bool "Support for MIPS Magnum 4000" @@ -16,9 +14,7 @@ config MIPS_MAGNUM_4000 select SYS_SUPPORTS_BIG_ENDIAN help This is a machine with a R4000 100 MHz CPU. To compile a Linux - kernel that runs on these, say Y here. For details about Linux on - the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at - <http://www.linux-mips.org/>. + kernel that runs on these, say Y here. config OLIVETTI_M700 bool "Support for Olivetti M700-10" @@ -26,6 +22,4 @@ config OLIVETTI_M700 select DMA_NONCOHERENT help This is a machine with a R4000 100 MHz CPU. To compile a Linux - kernel that runs on these, say Y here. For details about Linux on - the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at - <http://www.linux-mips.org/>. + kernel that runs on these, say Y here. diff --git a/tools/include/nolibc/nolibc.h b/tools/include/nolibc/nolibc.h index 8b7a9830dd22..754e64c4a1d1 100644 --- a/tools/include/nolibc/nolibc.h +++ b/tools/include/nolibc/nolibc.h @@ -1027,8 +1027,7 @@ struct sys_stat_struct { * - arguments are in a0, a1, a2, a3, then the stack. The caller needs to * leave some room in the stack for the callee to save a0..a3 if needed. * - Many registers are clobbered, in fact only a0..a2 and s0..s8 are - * preserved. See: https://www.linux-mips.org/wiki/Syscall as well as - * scall32-o32.S in the kernel sources. + * preserved. See: scall32-o32.S in the kernel sources. * - the system call is performed by calling "syscall" * - syscall return comes in v0, and register a3 needs to be checked to know * if an error occured, in which case errno is in v0.
The domain lookup for linux-mips.org fails for quite some time now. Further, the two links: http://decstation.unix-ag.org/ http://www.computer-refuge.org/classiccmp/ftp.digital.com/pub/DEC/TriAdd/ refer to old webpages or contain no further technical information. Remove all those dead references. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> --- arch/mips/Kconfig | 8 +------- arch/mips/jazz/Kconfig | 12 +++--------- tools/include/nolibc/nolibc.h | 3 +-- 3 files changed, 5 insertions(+), 18 deletions(-)