diff mbox series

[1/2] EDAC/synopsys: add support for version 3 of the Synopsys EDAC DDR

Message ID 20210831200316.3208310-1-dinguyen@kernel.org (mailing list archive)
State New, archived
Headers show
Series [1/2] EDAC/synopsys: add support for version 3 of the Synopsys EDAC DDR | expand

Commit Message

Dinh Nguyen Aug. 31, 2021, 8:03 p.m. UTC 
This patch adds support for version 3.80a of the Synopsys DDR controller
with EDAC. This version of the controller has the following differences:

- UE/CE are auto cleared
- Interrupts are supported by default

Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
 drivers/edac/synopsys_edac.c | 53 ++++++++++++++++++++++++++++++------
 1 file changed, 44 insertions(+), 9 deletions(-)

Comments

Borislav Petkov Sept. 15, 2021, 11:44 a.m. UTC | #1 
On Tue, Aug 31, 2021 at 03:03:15PM -0500, Dinh Nguyen wrote:
> This patch adds support for version 3.80a of the Synopsys DDR controller

Avoid having "This patch" or "This commit" in the commit message. It is
tautologically useless.

Also, do

$ git grep 'This patch' Documentation/process

for more details.

> with EDAC. This version of the controller has the following differences:
> 
> - UE/CE are auto cleared
> - Interrupts are supported by default
> 
> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
> ---
>  drivers/edac/synopsys_edac.c | 53 ++++++++++++++++++++++++++++++------
>  1 file changed, 44 insertions(+), 9 deletions(-)

In any case, am I supposed to take this or is this expecting some Ack
from Michal first?

Thx.
Dinh Nguyen Sept. 16, 2021, 11:13 p.m. UTC | #2 
On 9/15/21 6:44 AM, Borislav Petkov wrote:
> On Tue, Aug 31, 2021 at 03:03:15PM -0500, Dinh Nguyen wrote:
>> This patch adds support for version 3.80a of the Synopsys DDR controller
> 
> Avoid having "This patch" or "This commit" in the commit message. It is
> tautologically useless.
> 
> Also, do
> 
> $ git grep 'This patch' Documentation/process
> 

Sent v2 with a better commit message.

Dinh
diff mbox series

Patch

diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 7e7146b22c16..297845e65b65 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -101,6 +101,7 @@ 
 /* DDR ECC Quirks */
 #define DDR_ECC_INTR_SUPPORT		BIT(0)
 #define DDR_ECC_DATA_POISON_SUPPORT	BIT(1)
+#define DDR_ECC_INTR_SELF_CLEAR		BIT(2)
 
 /* ZynqMP Enhanced DDR memory controller registers that are relevant to ECC */
 /* ECC Configuration Registers */
@@ -171,6 +172,10 @@ 
 #define DDR_QOS_IRQ_EN_OFST		0x20208
 #define DDR_QOS_IRQ_DB_OFST		0x2020C
 
+/* DDR QOS Interrupt register definitions */
+#define DDR_UE_MASK			0x200
+#define DDR_CE_MASK			0x100
+
 /* ECC Corrected Error Register Mask and Shifts*/
 #define ECC_CEADDR0_RW_MASK		0x3FFFF
 #define ECC_CEADDR0_RNK_MASK		BIT(24)
@@ -533,10 +538,16 @@  static irqreturn_t intr_handler(int irq, void *dev_id)
 	priv = mci->pvt_info;
 	p_data = priv->p_data;
 
-	regval = readl(priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
-	regval &= (DDR_QOSCE_MASK | DDR_QOSUE_MASK);
-	if (!(regval & ECC_CE_UE_INTR_MASK))
-		return IRQ_NONE;
+	/*
+	 * v3.0 of the controller has the ce/ue bits cleared automatically
+	 * cleared, so this condition does not apply.
+	 */
+	if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)) {
+		regval = readl(priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
+		regval &= (DDR_QOSCE_MASK | DDR_QOSUE_MASK);
+		if (!(regval & ECC_CE_UE_INTR_MASK))
+			return IRQ_NONE;
+	}
 
 	status = p_data->get_error_info(priv);
 	if (status)
@@ -548,7 +559,9 @@  static irqreturn_t intr_handler(int irq, void *dev_id)
 
 	edac_dbg(3, "Total error count CE %d UE %d\n",
 		 priv->ce_cnt, priv->ue_cnt);
-	writel(regval, priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
+	/* v3.0 of the controller does not have this register */
+	if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR))
+		writel(regval, priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
 	return IRQ_HANDLED;
 }
 
@@ -834,8 +847,13 @@  static void mc_init(struct mem_ctl_info *mci, struct platform_device *pdev)
 static void enable_intr(struct synps_edac_priv *priv)
 {
 	/* Enable UE/CE Interrupts */
-	writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
-			priv->baseaddr + DDR_QOS_IRQ_EN_OFST);
+	if (priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)
+		writel(DDR_UE_MASK | DDR_CE_MASK,
+		       priv->baseaddr + ECC_CLR_OFST);
+	else
+		writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
+		       priv->baseaddr + DDR_QOS_IRQ_EN_OFST);
+
 }
 
 static void disable_intr(struct synps_edac_priv *priv)
@@ -890,6 +908,19 @@  static const struct synps_platform_data zynqmp_edac_def = {
 			  ),
 };
 
+static const struct synps_platform_data synopsys_edac_def = {
+	.get_error_info	= zynqmp_get_error_info,
+	.get_mtype	= zynqmp_get_mtype,
+	.get_dtype	= zynqmp_get_dtype,
+	.get_ecc_state	= zynqmp_get_ecc_state,
+	.quirks         = (DDR_ECC_INTR_SUPPORT | DDR_ECC_INTR_SELF_CLEAR
+#ifdef CONFIG_EDAC_DEBUG
+			  | DDR_ECC_DATA_POISON_SUPPORT
+#endif
+			  ),
+};
+
+
 static const struct of_device_id synps_edac_match[] = {
 	{
 		.compatible = "xlnx,zynq-ddrc-a05",
@@ -899,6 +930,10 @@  static const struct of_device_id synps_edac_match[] = {
 		.compatible = "xlnx,zynqmp-ddrc-2.40a",
 		.data = (void *)&zynqmp_edac_def
 	},
+	{
+		.compatible = "snps,ddrc-3.80a",
+		.data = (void *)&synopsys_edac_def
+	},
 	{
 		/* end of table */
 	}
@@ -1352,8 +1387,8 @@  static int mc_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (of_device_is_compatible(pdev->dev.of_node,
-				    "xlnx,zynqmp-ddrc-2.40a"))
+	if (!of_device_is_compatible(pdev->dev.of_node,
+				    "xlnx,zynq-ddrc-a05"))
 		setup_address_map(priv);
 #endif