@@ -1121,6 +1121,13 @@ L: linux-i2c@vger.kernel.org
S: Supported
F: drivers/i2c/busses/i2c-amd-asf-plat.c
+AMD NODE DRIVER
+M: Yazen Ghannam <yazen.ghannam@amd.com>
+L: linux-kernel@vger.kernel.org
+S: Supported
+F: arch/x86/include/asm/amd_node.h
+F: arch/x86/kernel/amd_node.c
+
AMD PDS CORE DRIVER
M: Shannon Nelson <shannon.nelson@amd.com>
M: Brett Creeley <brett.creeley@amd.com>
@@ -3128,6 +3128,10 @@ config TS5500
endif # X86_32
config AMD_NB
+ def_bool y
+ depends on AMD_NODE
+
+config AMD_NODE
def_bool y
depends on CPU_SUP_AMD && PCI
new file mode 100644
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * AMD Node helper functions and common defines
+ *
+ * Copyright (c) 2024, Advanced Micro Devices, Inc.
+ * All Rights Reserved.
+ *
+ * Author: Yazen Ghannam <Yazen.Ghannam@amd.com>
+ *
+ * Note:
+ * Items in this file may only be used in a single place.
+ * However, it's prudent to keep all AMD Node functionality
+ * in a unified place rather than spreading throughout the
+ * kernel.
+ */
+
+#ifndef _ASM_X86_AMD_NODE_H_
+#define _ASM_X86_AMD_NODE_H_
+
+#include <linux/pci.h>
+
+#define MAX_AMD_NUM_NODES 8
+#define AMD_NODE0_PCI_SLOT 0x18
+
+struct pci_dev *amd_node_get_func(u16 node, u8 func);
+
+#endif /*_ASM_X86_AMD_NODE_H_*/
@@ -119,6 +119,7 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_HPET_TIMER) += hpet.o
obj-$(CONFIG_AMD_NB) += amd_nb.o
+obj-$(CONFIG_AMD_NODE) += amd_node.o
obj-$(CONFIG_DEBUG_NMI_SELFTEST) += nmi_selftest.o
obj-$(CONFIG_KVM_GUEST) += kvm.o kvmclock.o
new file mode 100644
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * AMD Node helper functions and common defines
+ *
+ * Copyright (c) 2024, Advanced Micro Devices, Inc.
+ * All Rights Reserved.
+ *
+ * Author: Yazen Ghannam <Yazen.Ghannam@amd.com>
+ */
+
+#include <asm/amd_node.h>
+
+/*
+ * AMD Nodes are a physical collection of I/O devices within an SoC. There can be one
+ * or more nodes per package.
+ *
+ * The nodes are software-visible through PCI config space. All nodes are enumerated
+ * on segment 0 bus 0. The device (slot) numbers range from 0x18 to 0x1F (maximum 8
+ * nodes) with 0x18 corresponding to node 0, 0x19 to node 1, etc. Each node can be a
+ * multi-function device.
+ *
+ * On legacy systems, these node devices represent integrated Northbridge functionality.
+ * On Zen-based systems, these node devices represent Data Fabric functionality.
+ *
+ * See "Configuration Space Accesses" section in BKDGs or
+ * "Processor x86 Core" -> "Configuration Space" section in PPRs.
+ */
+struct pci_dev *amd_node_get_func(u16 node, u8 func)
+{
+ if (node >= MAX_AMD_NUM_NODES)
+ return NULL;
+
+ return pci_get_domain_bus_and_slot(0, 0, PCI_DEVFN(AMD_NODE0_PCI_SLOT + node, func));
+}
The "AMD Node" concept spans many families of systems and applies to a number of subsystems and drivers. Currently, the AMD Northbridge code is overloaded with AMD node functionality. However, the node concept is broader than just northbridges. Start files to host common AMD node functions and definitions. Include a helper to find an AMD node device function based on the convention described in AMD documentation. Anything that needs node functionality should include this rather than amd_nb.h. The AMD_NB code will be reduced to only northbridge-specific code needed for legacy systems. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> --- Notes: Link: https://lore.kernel.org/20241023172150.659002-5-yazen.ghannam@amd.com v1->v2: * No change. MAINTAINERS | 7 +++++++ arch/x86/Kconfig | 4 ++++ arch/x86/include/asm/amd_node.h | 27 ++++++++++++++++++++++++++ arch/x86/kernel/Makefile | 1 + arch/x86/kernel/amd_node.c | 34 +++++++++++++++++++++++++++++++++ 5 files changed, 73 insertions(+) create mode 100644 arch/x86/include/asm/amd_node.h create mode 100644 arch/x86/kernel/amd_node.c