[v5,4/7] x86/mce: Break up __mcheck_cpu_apply_quirks()

Commit Message

Qiuxu Zhuo Dec. 12, 2024, 2:01 p.m. UTC

From: Tony Luck <[e-mail]>

Split each vendor specific part into its own helper function.

Signed-off-by: Tony Luck <[e-mail]>
Tested-by: Qiuxu Zhuo <[e-mail]>
Reviewed-by: Sohil Mehta <[e-mail]>
Signed-off-by: Qiuxu Zhuo <[e-mail]>
---
Changes in v5:
  - Collect "Reviewed-by:" from Sohil.

Changes in v4:
  - Add necessary blank lines in apply_quirks_amd() (Yazen).
  - Use 'mca_cfg' instead of 'cfg' in apply_quirks_*(). (Yazen).

Changes in v3:
  - New patch.

 arch/x86/kernel/cpu/mce/core.c | 192 ++++++++++++++++++---------------
 1 file changed, 104 insertions(+), 88 deletions(-)

Patch

diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index ce6fe5e20805..3855ec2ed0e0 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -1910,101 +1910,117 @@  static void __mcheck_cpu_check_banks(void)
 	}
 }
 
+static void apply_quirks_amd(struct cpuinfo_x86 *c)
+{
+	struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array);
+
+	/* This should be disabled by the BIOS, but isn't always */
+	if (c->x86 == 15 && this_cpu_read(mce_num_banks) > 4) {
+		/*
+		 * disable GART TBL walk error reporting, which
+		 * trips off incorrectly with the IOMMU & 3ware
+		 * & Cerberus:
+		 */
+		clear_bit(10, (unsigned long *)&mce_banks[4].ctl);
+	}
+
+	if (c->x86 < 0x11 && mca_cfg.bootlog < 0) {
+		/*
+		 * Lots of broken BIOS around that don't clear them
+		 * by default and leave crap in there. Don't log:
+		 */
+		mca_cfg.bootlog = 0;
+	}
+
+	/*
+	 * Various K7s with broken bank 0 around. Always disable
+	 * by default.
+	 */
+	if (c->x86 == 6 && this_cpu_read(mce_num_banks) > 0)
+		mce_banks[0].ctl = 0;
+
+	/*
+	 * overflow_recov is supported for F15h Models 00h-0fh
+	 * even though we don't have a CPUID bit for it.
+	 */
+	if (c->x86 == 0x15 && c->x86_model <= 0xf)
+		mce_flags.overflow_recov = 1;
+
+	if (c->x86 >= 0x17 && c->x86 <= 0x1A)
+		mce_flags.zen_ifu_quirk = 1;
+}
+
+static void apply_quirks_intel(struct cpuinfo_x86 *c)
+{
+	struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array);
+
+	/*
+	 * SDM documents that on family 6 bank 0 should not be written
+	 * because it aliases to another special BIOS controlled
+	 * register.
+	 * But it's not aliased anymore on model 0x1a+
+	 * Don't ignore bank 0 completely because there could be a
+	 * valid event later, merely don't write CTL0.
+	 */
+	if (c->x86 == 6 && c->x86_model < 0x1A && this_cpu_read(mce_num_banks) > 0)
+		mce_banks[0].init = false;
+
+	/*
+	 * All newer Intel systems support MCE broadcasting. Enable
+	 * synchronization with a one second timeout.
+	 */
+	if ((c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xe)) &&
+	    mca_cfg.monarch_timeout < 0)
+		mca_cfg.monarch_timeout = USEC_PER_SEC;
+
+	/*
+	 * There are also broken BIOSes on some Pentium M and
+	 * earlier systems:
+	 */
+	if (c->x86 == 6 && c->x86_model <= 13 && mca_cfg.bootlog < 0)
+		mca_cfg.bootlog = 0;
+
+	if (c->x86_vfm == INTEL_SANDYBRIDGE_X)
+		mce_flags.snb_ifu_quirk = 1;
+
+	/*
+	 * Skylake, Cascacde Lake and Cooper Lake require a quirk on
+	 * rep movs.
+	 */
+	if (c->x86_vfm == INTEL_SKYLAKE_X)
+		mce_flags.skx_repmov_quirk = 1;
+}
+
+static void apply_quirks_zhaoxin(struct cpuinfo_x86 *c)
+{
+	/*
+	 * All newer Zhaoxin CPUs support MCE broadcasting. Enable
+	 * synchronization with a one second timeout.
+	 */
+	if (c->x86 > 6 || (c->x86_model == 0x19 || c->x86_model == 0x1f)) {
+		if (mca_cfg.monarch_timeout < 0)
+			mca_cfg.monarch_timeout = USEC_PER_SEC;
+	}
+}
+
 /* Add per CPU specific workarounds here */
 static bool __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
 {
-	struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array);
 	struct mca_config *cfg = &mca_cfg;
 
-	if (c->x86_vendor == X86_VENDOR_UNKNOWN) {
+	switch (c->x86_vendor) {
+	case X86_VENDOR_UNKNOWN:
 		pr_info("unknown CPU type - not enabling MCE support\n");
 		return false;
-	}
-
-	/* This should be disabled by the BIOS, but isn't always */
-	if (c->x86_vendor == X86_VENDOR_AMD) {
-		if (c->x86 == 15 && this_cpu_read(mce_num_banks) > 4) {
-			/*
-			 * disable GART TBL walk error reporting, which
-			 * trips off incorrectly with the IOMMU & 3ware
-			 * & Cerberus:
-			 */
-			clear_bit(10, (unsigned long *)&mce_banks[4].ctl);
-		}
-		if (c->x86 < 0x11 && cfg->bootlog < 0) {
-			/*
-			 * Lots of broken BIOS around that don't clear them
-			 * by default and leave crap in there. Don't log:
-			 */
-			cfg->bootlog = 0;
-		}
-		/*
-		 * Various K7s with broken bank 0 around. Always disable
-		 * by default.
-		 */
-		if (c->x86 == 6 && this_cpu_read(mce_num_banks) > 0)
-			mce_banks[0].ctl = 0;
-
-		/*
-		 * overflow_recov is supported for F15h Models 00h-0fh
-		 * even though we don't have a CPUID bit for it.
-		 */
-		if (c->x86 == 0x15 && c->x86_model <= 0xf)
-			mce_flags.overflow_recov = 1;
-
-		if (c->x86 >= 0x17 && c->x86 <= 0x1A)
-			mce_flags.zen_ifu_quirk = 1;
-
-	}
-
-	if (c->x86_vendor == X86_VENDOR_INTEL) {
-		/*
-		 * SDM documents that on family 6 bank 0 should not be written
-		 * because it aliases to another special BIOS controlled
-		 * register.
-		 * But it's not aliased anymore on model 0x1a+
-		 * Don't ignore bank 0 completely because there could be a
-		 * valid event later, merely don't write CTL0.
-		 */
-
-		if (c->x86 == 6 && c->x86_model < 0x1A && this_cpu_read(mce_num_banks) > 0)
-			mce_banks[0].init = false;
-
-		/*
-		 * All newer Intel systems support MCE broadcasting. Enable
-		 * synchronization with a one second timeout.
-		 */
-		if ((c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xe)) &&
-			cfg->monarch_timeout < 0)
-			cfg->monarch_timeout = USEC_PER_SEC;
-
-		/*
-		 * There are also broken BIOSes on some Pentium M and
-		 * earlier systems:
-		 */
-		if (c->x86 == 6 && c->x86_model <= 13 && cfg->bootlog < 0)
-			cfg->bootlog = 0;
-
-		if (c->x86_vfm == INTEL_SANDYBRIDGE_X)
-			mce_flags.snb_ifu_quirk = 1;
-
-		/*
-		 * Skylake, Cascacde Lake and Cooper Lake require a quirk on
-		 * rep movs.
-		 */
-		if (c->x86_vfm == INTEL_SKYLAKE_X)
-			mce_flags.skx_repmov_quirk = 1;
-	}
-
-	if (c->x86_vendor == X86_VENDOR_ZHAOXIN) {
-		/*
-		 * All newer Zhaoxin CPUs support MCE broadcasting. Enable
-		 * synchronization with a one second timeout.
-		 */
-		if (c->x86 > 6 || (c->x86_model == 0x19 || c->x86_model == 0x1f)) {
-			if (cfg->monarch_timeout < 0)
-				cfg->monarch_timeout = USEC_PER_SEC;
-		}
+	case X86_VENDOR_AMD:
+		apply_quirks_amd(c);
+		break;
+	case X86_VENDOR_INTEL:
+		apply_quirks_intel(c);
+		break;
+	case X86_VENDOR_ZHAOXIN:
+		apply_quirks_zhaoxin(c);
+		break;
 	}
 
 	if (cfg->monarch_timeout < 0)