diff mbox

[PATCHv2,03/28] OMAP: DSS2: Reset LANEx_ULPS_SIG2 bits after use

Message ID 1307627810-3768-4-git-send-email-tomi.valkeinen@ti.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Tomi Valkeinen June 9, 2011, 1:56 p.m. UTC
LANEx_ULPS_SIG2 bits are left on after entering ULPS. This doesn't cause
any problems currently, as DSI HW is reset when it is enabled. However,
if the reset is not done, operation fails if the bits are still set.

So reset the bits after entering ULPS to ensure operation even without
HW reset.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 drivers/video/omap2/dss/dsi.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)
diff mbox

Patch

diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 69c2d4f..4496d09 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -3395,6 +3395,10 @@  static int dsi_enter_ulps(struct platform_device *dsidev)
 	dsi_unregister_isr_cio(dsidev, dsi_completion_handler, &completion,
 			DSI_CIO_IRQ_ULPSACTIVENOT_ALL0);
 
+	/* Reset LANEx_ULPS_SIG2 */
+	REG_FLD_MOD(dsidev, DSI_COMPLEXIO_CFG2, (0 << 0) | (0 << 1) | (0 << 2),
+		7, 5);
+
 	dsi_cio_power(dsidev, DSI_COMPLEXIO_POWER_ULPS);
 
 	dsi_if_enable(dsidev, false);