@@ -271,7 +271,7 @@ static inline void lcd_enable_raster(void)
}
/* Disable the Raster Engine of the LCD Controller */
-static inline void lcd_disable_raster(bool wait_for_frame_done)
+static inline void lcd_disable_raster(enum da8xx_frame_complete wait_for_frame_done)
{
u32 reg;
int ret;
@@ -283,7 +283,7 @@ static inline void lcd_disable_raster(bool wait_for_frame_done)
/* return if already disabled */
return;
- if ((wait_for_frame_done == true) && (lcd_revision == LCD_VERSION_2)) {
+ if ((wait_for_frame_done == DA8XX_FRAME_WAIT) && (lcd_revision == LCD_VERSION_2)) {
frame_done_flag = 0;
ret = wait_event_interruptible_timeout(frame_done_wq,
frame_done_flag != 0,
@@ -771,7 +771,7 @@ static irqreturn_t lcdc_irq_handler_rev02(int irq, void *arg)
u32 stat = lcdc_read(LCD_MASKED_STAT_REG);
if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) {
- lcd_disable_raster(false);
+ lcd_disable_raster(DA8XX_FRAME_NOWAIT);
lcdc_write(stat, LCD_MASKED_STAT_REG);
lcd_enable_raster();
} else if (stat & LCD_PL_LOAD_DONE) {
@@ -781,7 +781,7 @@ static irqreturn_t lcdc_irq_handler_rev02(int irq, void *arg)
* interrupt via the following write to the status register. If
* this is done after then one gets multiple PL done interrupts.
*/
- lcd_disable_raster(false);
+ lcd_disable_raster(DA8XX_FRAME_NOWAIT);
lcdc_write(stat, LCD_MASKED_STAT_REG);
@@ -834,7 +834,7 @@ static irqreturn_t lcdc_irq_handler_rev01(int irq, void *arg)
u32 reg_ras;
if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) {
- lcd_disable_raster(false);
+ lcd_disable_raster(DA8XX_FRAME_NOWAIT);
lcdc_write(stat, LCD_STAT_REG);
lcd_enable_raster();
} else if (stat & LCD_PL_LOAD_DONE) {
@@ -844,7 +844,7 @@ static irqreturn_t lcdc_irq_handler_rev01(int irq, void *arg)
* interrupt via the following write to the status register. If
* this is done after then one gets multiple PL done interrupts.
*/
- lcd_disable_raster(false);
+ lcd_disable_raster(DA8XX_FRAME_NOWAIT);
lcdc_write(stat, LCD_STAT_REG);
@@ -986,7 +986,7 @@ static int lcd_da8xx_cpufreq_transition(struct notifier_block *nb,
if (val == CPUFREQ_POSTCHANGE) {
if (par->lcd_fck_rate != clk_get_rate(par->lcdc_clk)) {
par->lcd_fck_rate = clk_get_rate(par->lcdc_clk);
- lcd_disable_raster(true);
+ lcd_disable_raster(DA8XX_FRAME_WAIT);
da8xx_fb_calc_config_clk_divider(par, &par->mode);
if (par->blank == FB_BLANK_UNBLANK)
lcd_enable_raster();
@@ -1024,7 +1024,7 @@ static int fb_remove(struct platform_device *dev)
if (par->panel_power_ctrl)
par->panel_power_ctrl(0);
- lcd_disable_raster(true);
+ lcd_disable_raster(DA8XX_FRAME_WAIT);
lcdc_write(0, LCD_RASTER_CTRL_REG);
/* disable DMA */
@@ -1140,7 +1140,7 @@ static int cfb_blank(int blank, struct fb_info *info)
if (par->panel_power_ctrl)
par->panel_power_ctrl(0);
- lcd_disable_raster(true);
+ lcd_disable_raster(DA8XX_FRAME_WAIT);
break;
default:
ret = -EINVAL;
@@ -1208,9 +1208,9 @@ static int da8xxfb_set_par(struct fb_info *info)
bool raster = da8xx_fb_is_raster_enabled();
if (raster)
- lcd_disable_raster(true);
+ lcd_disable_raster(DA8XX_FRAME_WAIT);
else
- lcd_disable_raster(false);
+ lcd_disable_raster(DA8XX_FRAME_NOWAIT);
fb_var_to_videomode(&par->mode, &info->var);
@@ -1571,7 +1571,7 @@ static int fb_suspend(struct platform_device *dev, pm_message_t state)
par->panel_power_ctrl(0);
fb_set_suspend(info, 1);
- lcd_disable_raster(true);
+ lcd_disable_raster(DA8XX_FRAME_WAIT);
lcd_context_save();
pm_runtime_put_sync(&dev->dev);
console_unlock();
@@ -23,6 +23,11 @@ enum raster_load_mode {
LOAD_PALETTE,
};
+enum da8xx_frame_complete {
+ DA8XX_FRAME_WAIT,
+ DA8XX_FRAME_NOWAIT,
+};
+
struct da8xx_lcdc_platform_data {
const char manu_name[10];
void *controller_data;
Change the lcd_disable_raster funtion from using a bool to an enum as the function is very confusing with the current api. This helps make it clearer what the parameter is really doing. Signed-off-by: Darren Etheridge <detheridge@ti.com> --- drivers/video/da8xx-fb.c | 24 ++++++++++++------------ include/video/da8xx-fb.h | 5 +++++ 2 files changed, 17 insertions(+), 12 deletions(-)