@@ -38,6 +38,8 @@
#include <linux/slab.h>
#include <linux/debugfs.h>
#include <linux/pm_runtime.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
#include <video/omapdss.h>
#include <video/mipi_display.h>
@@ -374,6 +376,13 @@ struct dsi_packet_sent_handler_data {
struct completion *completion;
};
+struct dsi_module_id_data {
+ u32 address;
+ int id;
+};
+
+static const struct of_device_id dsi_of_match[];
+
#ifdef DSI_PERF_MEASURE
static bool dsi_perf;
module_param(dsi_perf, bool, 0644);
@@ -5336,6 +5345,62 @@ static void dsi_uninit_output(struct platform_device *dsidev)
omapdss_unregister_output(out);
}
+static int dsi_probe_of(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ struct dsi_data *dsi = dsi_get_dsidrv_data(pdev);
+ struct property *prop;
+ u32 lane_arr[10];
+ int len, num_pins;
+ int r, i;
+ struct device_node *ep;
+ struct omap_dsi_pin_config pin_cfg;
+
+ ep = omapdss_of_get_first_endpoint(node);
+ if (!ep)
+ return 0;
+
+ prop = of_find_property(ep, "lanes", &len);
+ if (prop == NULL) {
+ dev_err(&pdev->dev, "failed to find lane data\n");
+ r = -EINVAL;
+ goto err;
+ }
+
+ num_pins = len / sizeof(u32);
+
+ if (num_pins < 4 || num_pins % 2 != 0
+ || num_pins > dsi->num_lanes_supported * 2) {
+ dev_err(&pdev->dev, "bad number of lanes\n");
+ r = -EINVAL;
+ goto err;
+ }
+
+ r = of_property_read_u32_array(ep, "lanes", lane_arr, num_pins);
+ if (r) {
+ dev_err(&pdev->dev, "failed to read lane data\n");
+ goto err;
+ }
+
+ pin_cfg.num_pins = num_pins;
+ for (i = 0; i < num_pins; ++i)
+ pin_cfg.pins[i] = (int)lane_arr[i];
+
+ r = dsi_configure_pins(&dsi->output, &pin_cfg);
+ if (r) {
+ dev_err(&pdev->dev, "failed to configure pins");
+ goto err;
+ }
+
+ of_node_put(ep);
+
+ return 0;
+
+err:
+ of_node_put(ep);
+ return r;
+}
+
/* DSI1 HW IP initialisation */
static int omap_dsihw_probe(struct platform_device *dsidev)
{
@@ -5348,7 +5413,6 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
if (!dsi)
return -ENOMEM;
- dsi->module_id = dsidev->id;
dsi->pdev = dsidev;
dev_set_drvdata(&dsidev->dev, dsi);
@@ -5398,6 +5462,31 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
return r;
}
+ if (dsidev->dev.of_node) {
+ const struct of_device_id *match;
+ const struct dsi_module_id_data *d;
+
+ match = of_match_node(dsi_of_match, dsidev->dev.of_node);
+ if (!match) {
+ DSSERR("unsupported DSI module\n");
+ return -ENODEV;
+ }
+
+ d = match->data;
+
+ while (d->address != 0 && d->address != dsi_mem->start)
+ d++;
+
+ if (d->address == 0) {
+ DSSERR("unsupported DSI module\n");
+ return -ENODEV;
+ }
+
+ dsi->module_id = d->id;
+ } else {
+ dsi->module_id = dsidev->id;
+ }
+
/* DSI VCs initialization */
for (i = 0; i < ARRAY_SIZE(dsi->vc); i++) {
dsi->vc[i].source = DSI_VC_SOURCE_L4;
@@ -5433,6 +5522,19 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
dsi_init_output(dsidev);
+ if (dsidev->dev.of_node) {
+ r = dsi_probe_of(dsidev);
+ if (r) {
+ DSSERR("Invalid DSI DT data\n");
+ goto err_probe_of;
+ }
+
+ r = of_platform_populate(dsidev->dev.of_node, NULL, NULL,
+ &dsidev->dev);
+ if (r)
+ DSSERR("Failed to populate DSI child devices: %d\n", r);
+ }
+
dsi_runtime_put(dsidev);
if (dsi->module_id == 0)
@@ -5446,17 +5548,31 @@ static int omap_dsihw_probe(struct platform_device *dsidev)
else if (dsi->module_id == 1)
dss_debugfs_create_file("dsi2_irqs", dsi2_dump_irqs);
#endif
+
return 0;
+err_probe_of:
+ dsi_uninit_output(dsidev);
+ dsi_runtime_put(dsidev);
+
err_runtime_get:
pm_runtime_disable(&dsidev->dev);
return r;
}
+static int dsi_unregister_child(struct device *dev, void *data)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ platform_device_unregister(pdev);
+ return 0;
+}
+
static int __exit omap_dsihw_remove(struct platform_device *dsidev)
{
struct dsi_data *dsi = dsi_get_dsidrv_data(dsidev);
+ device_for_each_child(&dsidev->dev, NULL, dsi_unregister_child);
+
WARN_ON(dsi->scp_clk_refcount > 0);
dsi_uninit_output(dsidev);
@@ -5494,6 +5610,23 @@ static const struct dev_pm_ops dsi_pm_ops = {
.runtime_resume = dsi_runtime_resume,
};
+static const struct dsi_module_id_data dsi_of_data_omap3[] = {
+ { .address = 0x4804fc00, .id = 0, },
+ { },
+};
+
+static const struct dsi_module_id_data dsi_of_data_omap4[] = {
+ { .address = 0x58004000, .id = 0, },
+ { .address = 0x58005000, .id = 1, },
+ { },
+};
+
+static const struct of_device_id dsi_of_match[] = {
+ { .compatible = "ti,omap3-dsi", .data = dsi_of_data_omap3, },
+ { .compatible = "ti,omap4-dsi", .data = dsi_of_data_omap4, },
+ {},
+};
+
static struct platform_driver omap_dsihw_driver = {
.probe = omap_dsihw_probe,
.remove = __exit_p(omap_dsihw_remove),
@@ -5501,6 +5634,7 @@ static struct platform_driver omap_dsihw_driver = {
.name = "omapdss_dsi",
.owner = THIS_MODULE,
.pm = &dsi_pm_ops,
+ .of_match_table = dsi_of_match,
},
};
Add the code to make the DSI driver work with device tree on OMAP3 and OMAP4. A minor hack is needed at the moment in the DSI driver: the DSS driver needs to know the ID number of a DSI device, as clocks are routed in different ways to the DSI devices. At the moment we don't have any proper way to manage this, so this patchs adds a simple lookup table that is used to deduce the ID from the DSI device's base address. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> --- drivers/video/omap2/dss/dsi.c | 136 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 135 insertions(+), 1 deletion(-)