| Message ID | 1393590016-9361-9-git-send-email-tomi.valkeinen@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Am Freitag, den 28.02.2014, 14:20 +0200 schrieb Tomi Valkeinen: > Add DT binding documentation for TFP410 encoder > > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> > Reviewed-by: Archit Taneja <archit@ti.com> > --- > .../devicetree/bindings/video/ti,tfp410.txt | 41 ++++++++++++++++++++++ > 1 file changed, 41 insertions(+) > create mode 100644 Documentation/devicetree/bindings/video/ti,tfp410.txt > > diff --git a/Documentation/devicetree/bindings/video/ti,tfp410.txt b/Documentation/devicetree/bindings/video/ti,tfp410.txt > new file mode 100644 > index 000000000000..6a5a04627584 > --- /dev/null > +++ b/Documentation/devicetree/bindings/video/ti,tfp410.txt > @@ -0,0 +1,41 @@ > +TFP410 DPI to DVI encoder > +========================= > + > +Required properties: > +- compatible: "ti,tfp410" > + > +Optional properties: > +- gpios: power-down gpio Maybe call this powerdown-gpios? > +Required nodes: > +- Video port 0 for DPI input > +- Video port 1 for DVI output > + > +Example > +------- > + > +tfp410: encoder@0 { > + compatible = "ti,tfp410"; > + gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + tfp410_in: endpoint@0 { > + remote-endpoint = <&dpi_out>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + tfp410_out: endpoint@0 { > + remote-endpoint = <&dvi_connector_in>; > + }; > + }; > + }; > +}; regards Philipp -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/video/ti,tfp410.txt b/Documentation/devicetree/bindings/video/ti,tfp410.txt new file mode 100644 index 000000000000..6a5a04627584 --- /dev/null +++ b/Documentation/devicetree/bindings/video/ti,tfp410.txt @@ -0,0 +1,41 @@ +TFP410 DPI to DVI encoder +========================= + +Required properties: +- compatible: "ti,tfp410" + +Optional properties: +- gpios: power-down gpio + +Required nodes: +- Video port 0 for DPI input +- Video port 1 for DVI output + +Example +------- + +tfp410: encoder@0 { + compatible = "ti,tfp410"; + gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint@0 { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint@0 { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; +};